That 60C is at load with the CPUs at 4.3Ghz.. my CPUs draw a lot more power than yours so I guess the temp is ok. I can't tighten it down more, and it's mounted the right way (had to do it several times due to a mixup in the manual on which pad to use). Even with the stock air cooling, the VRM 0 temps went straight to 45C in bios for me, so I guess the sensor may be out of whack (like most sensors on this board are).
Edit: Attached idle shot
Well.. 10s of idle time
Water at 20C.
Last edited by jcool; 08-30-2010 at 08:12 AM.
acceptable..
Now go crank that up to 4750 and post a sub 2 sec wPrime32 time..
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
Originally Posted by Frisch
*goes to turn down the water chiller to 6C, opens Window*
brrrrrrrrrrrrrrrrrrrrrrr
Go Josh GO!*goes to turn down the water chiller to 6C, opens Window*
brrrrrrrrrrrrrrrrrrrrrrr
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
we want some moar mhz !!!
"Study hard my young friend"[/B].
---------------------------------------
Woody: It's not a laser! It's a... [sighs in frustration]
Jcool, my cpu0 pwm temps are high also with a fb block ..... I actually added a 60 mm Fan directly over them to keep the below 60c. I was hoping your were better
Samsung 42" LCD/Antec 1200 Case/Corsair 1000W PS/ Gigabyte GA-X58A-UD7 / Intel I7 990X 3.47 @ 4.5 / 3 x RX360 rad /Apogee Xt /2 x 128gb Patriot Torqx M28's @ Raid 0/ WD 600Gb VelociRaptor / Kingston Hyper X 12Gb (6x2) DDR3 2000/ XFX DD HD 7970
whats the power draw?
All along the watchtower the watchmen watch the eternal return.
Hunter, 60C is not "high" for digital VRM
It may seem high, but consider they are at least reated for 135C operating. It's like running your GPU at 45C instead of 100C with the stock cooler.
Besides, most sensors on this SR-2 are so out of whack that I wouldn't begin to trust any of those readings. I mean what the hell.. CPU0 always shows 10C or more higher than CPU1, VRM 1 is way too low, etc.
Didn't get around to benching last night by the way, too much stuff to catch up on. This is my work PC after all
STEvil, haven't measured yet. Not sure I want to know :fresse:
Yeah, probably those sensors are off. Some of your temps looks really off, tho. We need an infrared-reading to find out exact temps. We also need DMM-readings for temps and voltages om SR-2. Anybody got any of these yet?
► ASUS P8P67 Deluxe (BIOS 1305)
► 2600K @4.5GHz 1.27v , 1 hour Prime
► Silver Arrow , push/pull
► 2x2GB Crucial 1066MHz CL7 ECC @1600MHz CL9 1.51v
► GTX560 GB OC @910/2400 0.987v
► Crucial C300 v006 64GB OS-disk + F3 1TB + 400MB RAMDisk
► CM Storm Scout + Corsair HX 1000W
+
► EVGA SR-2 , A50
► 2 x Xeon X5650 @3.86GHz(203x19) 1.20v
► Megahalem + Silver Arrow , push/pull
► 3x2GB Corsair XMS3 1600 CL7 + 3x4GB G.SKILL Trident 1600 CL7 = 18GB @1624 7-8-7-20 1.65v
► XFX GTX 295 @650/1200/1402
► Crucial C300 v006 64GB OS-disk + F3 1TB + 2GB RAMDisk
► SilverStone Fortress FT01 + Corsair AX 1200W
If you sent me the system I could run it under an infrared camera for ya...
But somehow I don't see anyone willing to send a system like that, and I can't send the camera.
Naw, seems to be just what we said it is.. crappy sensors.
http://www.evga.com/forums/tm.aspx?m=573635
VRM 0 is too high and VRM 1 too low, but who cares as long as it's running great
The 10C higher Coretemps by board default on CPU 0 do nag me though
OMG!!!!!
I can't say anything else to this thread other than I got wood
Lol, thanks.. my camera is still broken though, wait until you see real pics of the finished rig
Yeah those sensors seams to be really off, but your temps are are really good. Those VRM are rated for really high-temp, and you got ~40'C to go before it would make any instability or other problems. So you are on the same side, even if those sensors are really crappy.Naw, seems to be just what we said it is.. crappy sensors.
http://www.evga.com/forums/tm.aspx?m=573635
VRM 0 is too high and VRM 1 too low, but who cares as long as it's running great
The 10C higher Coretemps by board default on CPU 0 do nag me though
Yes, the CPU#0 core-temp runs a lot hotter. I fixed it by using tow different CPU-cooler. The good one on CPU#0 has reduced it to 4-3'C.
► ASUS P8P67 Deluxe (BIOS 1305)
► 2600K @4.5GHz 1.27v , 1 hour Prime
► Silver Arrow , push/pull
► 2x2GB Crucial 1066MHz CL7 ECC @1600MHz CL9 1.51v
► GTX560 GB OC @910/2400 0.987v
► Crucial C300 v006 64GB OS-disk + F3 1TB + 400MB RAMDisk
► CM Storm Scout + Corsair HX 1000W
+
► EVGA SR-2 , A50
► 2 x Xeon X5650 @3.86GHz(203x19) 1.20v
► Megahalem + Silver Arrow , push/pull
► 3x2GB Corsair XMS3 1600 CL7 + 3x4GB G.SKILL Trident 1600 CL7 = 18GB @1624 7-8-7-20 1.65v
► XFX GTX 295 @650/1200/1402
► Crucial C300 v006 64GB OS-disk + F3 1TB + 2GB RAMDisk
► SilverStone Fortress FT01 + Corsair AX 1200W
J , you must have a cell phone camera
"Study hard my young friend"[/B].
---------------------------------------
Woody: It's not a laser! It's a... [sighs in frustration]
Sure, but it takes xtremely crappy pics. Just wait a few more days until my friend and his DSLR come visit meJ , you must have a cell phone camera
UPDATES ARE NEEDED!!!!
FixedUPDATES WITH PICTURES ARE NEEDED!!!!
I know.. still havent gotten round to even benching that thing yet. And no new cam either...
Long overdue update - I seem to recall I promised decent pics of my SR-2 setup. Here they are (see post 1)
Friend of mine took them with a DSLR.
Beautiful work and excellent pics!Long overdue update - I seem to recall I promised decent pics of my SR-2 setup. Here they are (see post 1)
Friend of mine took them with a DSLR.
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
Posting Permissions
Reply With Quote
Bookmarks