The Maximus Formula Thread - Help/OCing/Guide/Rampage conversion

[NBK]

I'm running at 6. But last I seen your specs your NB Voltage seemed low.

I'm running a Q6700
Everest Report on my system.

Temperatures
Motherboard 31 °C (88 °F)
CPU 23 °C (73 °F)
CPU #1 27 °C (81 °F)
CPU #1 27 °C (81 °F)
CPU #1 21 °C (70 °F)
CPU #1 22 °C (72 °F)
North Bridge 40 °C (104 °F)
South Bridge 38 °C (100 °F)
GPU Diode 38 °C (100 °F)
SAMSUNG HD103UJ 27 °C (81 °F)
WDC WD2000JS-60NCB1 38 °C (100 °F)
WDC WD2500KS-00MJB0 56 °C (133 °F)


Voltage Values
CPU Core 1.30 V
FSB VTT 1.33 V
North Bridge Core 1.42 V
South Bridge Core 1.07 V
South Bridge PLL 1.54 V
DIMM 2.10 V
DIMM VTT 1.04 V

Hi ShawnTRD,

I upped the North Bridge Voltage to 1.49V and i can now run Command Performance Level of 6. Cannot do 5 yet or at all...

Other specs that i changed:
CPU Voltage 1.28125V
DRAM Voltage 2.00V
DRAM Frequency DDR2-961[I would like for it to stay at 1066]

Thanks
NBK

[NBK]

I wonder what failed my RAM???

CPU temps did not go over 58C!

[Aug 19 19:10] Work thread starting
[Aug 19 19:10] Beginning a continuous self-test to check your computer.
[Aug 19 19:10] Please read stress.txt. Choose Test/Stop to end this test.
[Aug 19 19:10] Test 1, 4000 Lucas-Lehmer iterations of M19922945 using FFT length 1024K.
[Aug 19 19:12] Test 2, 4000 Lucas-Lehmer iterations of M19922943 using FFT length 1024K.
[Aug 19 19:13] Test 3, 4000 Lucas-Lehmer iterations of M19374367 using FFT length 1024K.
[Aug 19 19:15] Test 4, 4000 Lucas-Lehmer iterations of M19174369 using FFT length 1024K.
[Aug 19 19:16] Test 5, 4000 Lucas-Lehmer iterations of M18874369 using FFT length 1024K.
[Aug 19 19:16] FATAL ERROR: Rounding was 0.5, expected less than 0.4
[Aug 19 19:16] Hardware failure detected, consult stress.txt file.
[Aug 19 19:16] Torture Test ran 5 minutes - 1 errors, 0 warnings.
[Aug 19 19:16] Work thread stopped.