ELPIDA Chip

[cesariuth]

hi guys

I need help with two pairs of Kingstone DDR3 1333MHz 2X2Gb 1.5v chip ELPIDA stock and with out heatspreder.

for one side there is one chip ELPIDA TWN J1108BDBG -DJ-F 1015A905620 and by the other side ELPIDA TWN J1108BDBG -DJ-F 1015A906W20



Are good chip for OC in AMD plataform???

what kind of elpida chip are??

THX

[BeepBeep2]

BDBG isn't really known to overclock well...you can still try it though.

[Mafio]

don't know how they run on AMD but on intel they are quite good
i've 2 kit of kingston 2133 cas9 2x2gb with these chip, they scale pretty well with the voltage and work quite good at high frequency.
the first kit can do 2450 MHZ cas6 suicide shot and 2400 benchable, the other kit cas6 and cas7 is pure crap (2000 MHZ cas 7 is a no go...) but cas8 is only a bit worst than the better one.
like PSC they love high tRCD, at least CAS + 2

32M @ 2375 MHZ / 8-11-8-28 1t / 1.86 volt

[BeepBeep2]

don't know how they run on AMD but on intel they are quite good
i've 2 kit of kingston 2133 cas9 2x2gb with these chip, they scale pretty well with the voltage and work quite good at high frequency.
the first kit can do 2450 MHZ cas6 suicide shot and 2400 benchable, the other kit cas6 and cas7 is pure crap (2000 MHZ cas 7 is a no go...) but cas8 is only a bit worst than the better one.
like PSC they love high tRCD, at least CAS + 2

32M @ 2375 MHZ / 8-11-8-28 1t / 1.86 volt

If they can do 2000 6-9-6 that would impress me.

[NKrader]

If they can do 2000 6-9-6 that would impress me.

with an intel of course a real processor

[BeepBeep2]

in intel of course a real processor

Troll.

X6 is where its at

[cesariuth]

With 1.503v



those chip are awesome

[BeepBeep2]

Wow. I wanna see CAS 6.

[Royalk]

Bump to 1.7v and waiting to see you did cas 6

[cesariuth]

I dont put to want hard with it...for now

[BeepBeep2]

How about 1.65v? 1.7v is not going to hurt it, my Hypers have been taking 1.73v of abuse for almost two months now.

[cesariuth]

I will try use more voltage, but i don't know if these chip are Elpida Hyper......

[Royalk]

BDBGs are not hypers...But maybe better than BBSE...

[Barr3l Rid3r]

test the max at 1.65v 6-7-6 and 7-7-7

[lzxhenry]

With 1.503v



those chip are awesome

That's a very good result at 1.5v. U should be satisfied on this 1333kit le.