Heya.
I´ve been reading up on these "EB" threads the past few days and I must admit I´m very tempeted by them.
At the moment I have Mushkin special 2-2-2 that can bench at 240fsb 1:1 with 2.8v!! Pretty amazing!
My problem is that I need one gig of ram.
My question is what´s the diff between "ordinarey" EL optimized kit from OCZ and the new EB stuff?
I can see that the price diff. is almost 90$!
So please enlighten me
would go for the EB stuff.. seems to pack out some punches.. although I dont know how the onb. memory controller would act with these different chips..
"M-I-A"
takker biasIt´s just that the price diff. is pretty stiff i believe but from what I´m hearing the way to go is EB! right?
A second qustion - is the EB3200 so much lousier than the EB3700? it seems like everybodies is aiming for the 3700EB?!
eb > el
eb runs 3-2-2 wich is almost as fast as 2-2-2 because of some tweaks
el runs 2-3-2 afaik. i think the eb is faster than the el at the same mhz
right-on seems i´ve overlooked the diff in Trc - guess i´ll try out 1gb of pc3200EB - hopefully they´ll give me around 240-250 1:1 - right?
You should go with the pc3500EB if your looking for 250Mhz
Hi all
first sorry for the bad english
i just got some Mushkin 3200 Special 2-2-2 Dual Channel 2x512
1 of the bloks had a defekt.
Now i will send them back and get other ram
my mothermoard is the asus K8V Deluxe my cpu is af amd 64 3200+
will the bedst be to get the
1024MB kit DDR PC-3500 Platinum EB - OCZ
or a new set of
1Gb kit DDR PC-3200 Special 2-2-2 Dual Channel - Mushkin
y not the 3700EB ?Originally posted by Spec3
You should go with the pc3500EB if your looking for 250Mhz
or do you mean, they are good for people who want >250MHz and he would save some money by buying 3500EB ?
----- AMD K6-2 300 "Chomper" xxxxx xxxx xxxx /// 300 MHz @ 2,200 V -----
----- AMD Athlon XP 1700+ "Thouroghbred B" JIUHB 0306 MPMW /// 2400 MHz @ 1,900 V -----
----- AMD Athlon XP-M 2500+ "Barton" AQXEA 0327 UPMW /// 2450 MHz @ 1,850 V -----
----- AMD Athlon XP-M 2600+ "Barton" IQYHA 0401 XPMW /// 2500 MHz @ 1,750 V -----
----- AMD Athlon 64 3000+ "Newcastle CG" xxxxx 0418 WPMW /// 2600 MHz @ 1,600 V -----
----- AMD Athlon 64 3200+ "Winchester D0" xxxxx 0433 SPMW /// 2750 MHz @ 1,616 V -----
----- AMD Phenom II X2 555 BE "Callisto" xxxxx xxxx xxxx /// 4080MHz @ 1,375 V -----
----- AMD Ryzen "Zen" xxxxx xxxx xxxx /// TBA @ TBA -----
price.. the 3700 got VERY expensive.
i got 512 for 164, then a week later it was over 180 for that same 2*256 kit. $195 for 2*256 is a little high. and its about double that for a gig.... nearly 400? neg.
Dell Studio XPS16... no desktop
yes i have AIM, yes you can send me a message. EvilSpork3 i dare you.
i just received my PC 3500 Dual Kit 1024MB today for P4C800E
250MHz 3-2-2-5-4 prime stable with only 3,0V !
More seems to be unlikely because of memory controller
another thing I want to clear is, ras to cas on the EB ram doesnt matter? because I was sure as heck that it does matter. pc3700eb does about 250fsb average but 3-2-3-6 and the 3 in ras-cas hurts performance bad over it being a 2, is that correct?
3000+ Venice 240x9=2.16GHz(ondie controller limit) 2x512mb patriot tccd ram
9700pro at 325/310 runs all games buttery smooth!
9700(8 pipe softmod, 128m) at 410/325 23821 at 325/310 21287 at 275/270 19159
9500(4 pipes, 128m) at 420/330 18454 at 275/270 13319
9500(8 pipe softmod, 64m) at 390/310 19201 at 275/270 16052
9500(4 pipes, 64m) at 400/310 16215 at 275/270 12560
3dmark scores with Ti4200 and Ti4800se
Ti4200 at 340/730 19558 at 300/650 18032 at 275/550 16494 at 250/500 15295
3dmark scores with older gpus
Ti500 at 275/620 14588 Ti200 at 260/540 13557 MX440 at 380/680 11551
yes but CAS doesnt matter
personally i'd go for the PC3700EB for potential to go >250mhz 2.5-2-2-6/8 to 3-2-2-8
---
If you look in local forums you get BH-5 cheaper than PC3700 EB
Opteron 165
Dfi NF4 Expert
4x1 1GB twinmos PC 3200
XFX 7900GT 550/1500
thats what I told him. he thinks none of the timings matter, I told him it being cas3 doesnt matter but the ras-cas of 3 hurts it bad but he keeps saying it dont matter! sandra shows little bandwith difference but youll lose big performance in 3dmark and games though
3000+ Venice 240x9=2.16GHz(ondie controller limit) 2x512mb patriot tccd ram
9700pro at 325/310 runs all games buttery smooth!
9700(8 pipe softmod, 128m) at 410/325 23821 at 325/310 21287 at 275/270 19159
9500(4 pipes, 128m) at 420/330 18454 at 275/270 13319
9500(8 pipe softmod, 64m) at 390/310 19201 at 275/270 16052
9500(4 pipes, 64m) at 400/310 16215 at 275/270 12560
3dmark scores with Ti4200 and Ti4800se
Ti4200 at 340/730 19558 at 300/650 18032 at 275/550 16494 at 250/500 15295
3dmark scores with older gpus
Ti500 at 275/620 14588 Ti200 at 260/540 13557 MX440 at 380/680 11551
The OCZ EB will run with trcd of 2 on 95%+ of the sticks so what are you complaining about?
Posting Permissions
Reply With Quote
Bookmarks