If you want support for 2 360 rads without modding, Mountain Mods and Danger Den are probably your best choice. Both design large cases specifically designed for liquid cooling. The Pinnacle is a great option, though some prefer the Mountain Mod cubes.
One thing you need to realize, is that those specialized cases will almost always cost more than the more average cases.
“Little expense had been spared to create the impression that no expense had been spared.” - Hitchhiker's GuideMondays:It's better to ask dumb questions now, than to look stupid later
The Silverstone TJ07 / corsairs 800D / Coolermaster ATCS840 should do the trick.
I'm personally using the ATCS and the rads fit in without any issues
How did you fit the second 360 internally?Originally Posted by zedane
The Silverstone TJ07 / corsairs 800D / Coolermaster ATCS840 should do the trick.
I'm personally using the ATCS and the rads fit in without any issues
The Corsair Obsidian can fit a 360 and 280 I believe with a bit of modding in the bottom HDD cages.
The ACTS can fit a 360 and 240 internally with no modding.
Silverstone TJ07 can fit 2x 480s lol.
Cooler Master ATCS 840 Silver Water Cooled || Vista x64 || Corsair HX1000
Swiftech MCR320 || MCP355 /w XSPC ResTop || Swiftech GTZ || 1/2" ID x 3/4" OD Duralene Tubing
Q9550@3.7Ghz, E0, 1.215 VID || Asus Rampage, 1.25 vCore, 1.29 NB, 1.32 VTT ||XFX 4870x2
Dell 3007WFP-HC || 2x Dell 2007WFP || 4GB(2x2GB) Mushkin DDR2 6400 800MHZ ram at 4-4-4-12-2T
ATH-A900/Z-2300s || FiiO E5 Amp || G15 Rev 1 || G7 || Logitech 9000 Quickcam || Salar M8 Microphone
6401AALS WD Caviar Black || 400GB Seagate || 500GB Seagate || 250 Seagate
White MSI Wind U100 2GB Ram || Windows 7
This is how i manage to fit the rads in
I think its a pretty simple setup but nontheless i shall give some descriptions
Notice i am using 2 long screws to hold the mounting bracket in place. 2x 120mm fans are used to prop the rads forward and towards the motherboard as there is a protrusion between the hdd rack and 5.25" bay.
Also do note that the screws used to hold the mounting bracket are not perfectly fitted, and that the rad is slightly tilted at an angle but nontheless, it is still steady in place.
I believe even without the screws, the rad would still be pretty stable in place.
How can the ACTS fit a 360 and 240 without modding, I can't see where to fit the second rad actually...
As above
Posting Permissions
Reply With Quote
Bookmarks