XS HWBot Team

[TheGoat Eater]

Nice score!

Skinnee posted a good score today as well, he is waving XS' flag in the Lords of Overclocking challenge @ FM!

I laughed my arse off lol - looks like the 980X is decent

I had to bow out of that benching last weekend due to a death in the family... this was a pleasant surprise

[Don_Dan]

I'm sorry to hear this mate!

But you found a nice CPU, do you plan on testing some 2D with it?
On a sidenote, somehow this score did not pop up yet on the Lords of Overclocking site...

[skinnee]

I'm sorry to hear this mate!

But you found a nice CPU, do you plan on testing some 2D with it?
On a sidenote, somehow this score did not pop up yet on the Lords of Overclocking site...

Drivers...

I didn't think the 257.xx drivers would be FM approved yet, so I stepped back to the 19x.xx drivers. Dumb move, but resolved for the later runs.

[Don_Dan]

Your new run says "not FM approved" as well, but damn, almost 42k is nice!

[skinnee]

thx, that was the best run using the old drivers.

[Movieman]

thx, that was the best run using the old drivers.

Do I have to drive up there and show you how to do this right?

[skinnee]

Do I have to drive up there and show you how to do this right?

All done with Air for now, but thanks for the offer.

[=[PULSAR]=]

...so got bored with ambient temps, and currently disassembling a 1/3hp AC. The chiller build ensues Should work very nicely on the SR2 hoping for somewhere around -10C atleast.

EDIT: Temps are -15C open air, hoping for a good drop once submerged.

[Don_Dan]

zeneffect is hitting some good numbers with his i5 655k on DICE:

[Linuxfan]

Good DICE runs today ZenEffect!
My R3E's tripple channel stopped working so it might be a little while till I'm back up and running again. Got a bunch of GPUs to test on LN2.
As a side note, I'm going to sell my GTX 480 and need to get a 1200w PSU so if anybody wants the GPU LMK.... The GPU will be up in the FS section this week.
This 480 does 900/1167 on stock cooling 1.30v in 85oF ambient and 1075/1200+ on LN2 at -90oC without OVP or OCP mods.

[Sil3ntSnip3a]

Gunna try and get some good numbers on my XFX 5770 over today and tomorrow. Guys got some tips/tricks? I've found the Vmod I need also if I can get a DICE container for it!

[Linuxfan]

Gunna try and get some good numbers on my XFX 5770 over today and tomorrow. Guys got some tips/tricks? I've found the Vmod I need also if I can get a DICE container for it!

Be sure to use the best OS and drivers for each benchmark.
If you need any help with that just PM me.
Good luck!

[Sil3ntSnip3a]

anyone on the team got a pot with 8600gt & 5770 mounting bracket? I would like to borrow it for a DICE run. I will be paying shipping and a security deposit; just want to borrow instead of dropping $140.00.

edit: also in regards to overclocking my 5770. Linux and I have been PM'ing each other about tips and tricks overclocking it. I can't seem to find a version of msi afterburner that will allow me to get past 1.35 volts though - asked around in the guru3d afterburner home forums too. No luck!

Update: Working on 1000/1200 as we speak. So far I am at 990/1200 @ 1.27v~1.28v, I really started seeing voltage tweaks around a 970 core. I hope I can get a little further on less voltage for the rest of the night!

-End of the night: I couldn't get a stable 1000/1200 even @ 1.30v~1.31v. Its bed time

7/29/2010

I got 1010 @ 1.35v~1.36v. Either something is bugging my chip or I just got unlucky with my card. People say they are seeing temperatures of up to 77* at 1.275v. I only saw a maximum temperature of 60* at 1010/1200 1.35v. Seems a little wacko to me!

[chew*]

anyone on the team got a pot with 8600gt & 5770 mounting bracket? I would like to borrow it for a DICE run. I will be paying shipping and a security deposit; just want to borrow instead of dropping $140.00.

edit: also in regards to overclocking my 5770. Linux and I have been PM'ing each other about tips and tricks overclocking it. I can't seem to find a version of msi afterburner that will allow me to get past 1.35 volts though - asked around in the guru3d afterburner home forums too. No luck!

Update: Working on 1000/1200 as we speak. So far I am at 990/1200 @ 1.27v~1.28v, I really started seeing voltage tweaks around a 970 core. I hope I can get a little further on less voltage for the rest of the night!

-End of the night: I couldn't get a stable 1000/1200 even @ 1.30v~1.31v. Its bed time

7/29/2010

I got 1010 @ 1.35v~1.36v. Either something is bugging my chip or I just got unlucky with my card. People say they are seeing temperatures of up to 77* at 1.275v. I only saw a maximum temperature of 60* at 1010/1200 1.35v. Seems a little wacko to me!

You need a hardmod.

[Don_Dan]

Someone with ~80 points left us today, we're down to 14520 now and HWLuxx is just 50 points away...

Edit: Zucker2k went to OC Forums after getting banned here a while ago. I already told Gatman to stop banning members of the team but he just won't listen...

[luke997]

Any ideas what are the best settings to get high AM3 score?

I got 230K with cpu @4.85 and GPU @~900 yet I see others do high >350K with just a little bit higher cpu (like 5ghz) and lower gpu clock?

Is it Win7 or does it work better with higher bus rather then multiplier?

[systemviper]

Someone with ~80 points left us today, we're down to 14520 now and HWLuxx is just 50 points away...

Edit: Zucker2k went to OC Forums after getting banned here a while ago. I already told Gatman to stop banning members of the team but he just won't listen...

hey all, i have been looking for a team to join, I keep coming back to here...
I feel that i will grow much more working with a team, and there is so much for me to learn. so so much.

i do most of my benching in the winter but i want to start preparing and learning, from the drama over the last few weeks, i realize i know squatz. But i want to learn.....

I have been toying with this idea for the last month and i won't make a move if i don't put it in writing, so here it is....

I would like to join XS hwbot team... where do i sign up....

[chew*]

hey all, i have been looking for a team to join, I keep coming back to here...
I feel that i will grow much more working with a team, and there is so much for me to learn. so so much.

i do most of my benching in the winter but i want to start preparing and learning, from the drama over the last few weeks, i realize i know squatz. But i want to learn.....

I have been toying with this idea for the last month and i won't make a move if i don't put it in writing, so here it is....

I would like to join XS hwbot team... where do i sign up....

Just join XtremeSystems on hwbot viper......be careful there is another team with xtreme system name with the space like that <<<<----

[systemviper]

as it was written so it was done....

so now i am a member of your team, i am very excited to learn and grow, plus help the team......

hello to all!

[=[PULSAR]=]

Welcome partner in crime

[chew*]

as it was written so it was done....

so now i am a member of your team, i am very excited to learn and grow, plus help the team......

hello to all!

Where's your location viper?

[systemviper]

I'm in CT.... right next door to you in RI

[chew*]

I'm in CT.... right next door to you in RI

Looks like you need to make a road trip and get on MSN skype or AIM or ICQ.

Feel free to PM me

[Linuxfan]

Hey SystemViper, welcome! Glad to see you were persuaded to join the team!

[systemviper]

Looks like you need to make a road trip and get on MSN skype or AIM or ICQ.

Feel free to PM me

yea been trying to hook up with =[PULSAR]= it woudl be fun to all get together....