Starting @353 is good
I still have the system under air cooling so the HTT max is 396 and more voltage above 1.47v doesn’t help with getting a higher HTT. I ran the Winrar bench test with the 1055T @ the above HTT and then tried other setting using a higher multi with lower HTT for comparison. The problem with that being that the processor plus NB multis on the 1055T are both very limited so trying to find a combination where the CPU, memory, NB and link speeds are similar to the 396HTT test is difficult at best.
I finally just pulled the 1055 then installed the 1090T which makes it easier to come up with a settings combination for a comparison (high HTT low multi to high multi low HTT).
1055t @10x396=3960MHz
1055t@13x305=3965MHz
1090t @10x396=3960MHz
1090t@16.5x240=3973MHz
![]()








Reply With Quote
Bookmarks