Hi guys!
I have a problem understanding the layout of my non-reference ASUS 4850. It is ssame as this one.
Ceemic, you suggest to measure vGPU on the capacitors:

But the voltage I measure between the positive and negative leads of the capacitor is about 0.1V higher than it should be. Even more so, the voltage between the pos and neg leads of the cap is significantly different from the voltage between pos lead of the cap and ground wire of the molex connector.
And I can tell for sure (judging by the temperature and OC) the voltage I've measured isn't vGPU. Where can I find the right voltage?
Thanks in advance.
P.S. I've checked my DMM, it's error doesn't exceed 1% when measuring 1.3V