Armageddon FTW lets see some results!
Armageddon FTW lets see some results!
Signatures make my posts look huge... but I'm not humble enough to completely remove my signature, so I kept this note explaining it.
First system
Iwill ZmaxDP dual 275 oc to 285 rus at 45 celsius full load.
Second sytem is an arima 4way quad opteron 8356
with 4 thermaltake a1 .
True Copper convex lapped TIM print (i7 920)
Did you lap the CPU?
Signatures make my posts look huge... but I'm not humble enough to completely remove my signature, so I kept this note explaining it.
Here3's a pic of my hp cq5320 with zotac 9800 eco edition which i got today.
![]()
can i point you to http://www.xtremesystems.org/forums/...play.php?f=207 ?
![]()
Sorry for the bad quality photos![]()
Last edited by >D4L70N<; 07-27-2010 at 04:47 AM.
![]()
Gelid stuff from my worklog. Pretty quiet![]()
Project : Panda - in progress...
|Intel i5-750|Kingston HyperX DDR3 1600Mhz CL9 XMP 2x2Gb|Asus P7P55D
|Sapphire Radeon X800GTO|Spinpoint F3 500Gb|Corsair TX650|Antec 300|iiyama ProLite E431S
|Logitech MX518 + Steel Series QCK|KME 2201 Black|Logitech S220 2.1|
![]()
my 800d
![]()
i7-980x 4.3G//RampageⅡExtreme//Corsair Domi1866×2 12GB//HD 5870×2 CF//SSD X-25M 80×2 Raid0//Corsair 1000HX//Corsair CC800D
Water
・Pump MCP-355×2 ・GPU EK FC5870-NK
・CPU HEATKILLER Rev3.0 Limited
・Rad XSPC RX480×2 &RX240
・Tube Tygon R3603 &PrimoChill
・Ram Mips base custom. Made in Japan
Take it someone likes red??
BTW what is the little device lower left above PSU, thermometer??
As of 04/29/11
Celtic Spirit >> (Under Construction / WC’ed) >> Antec SX1200, MSI 890GXM-E65, PII X6 1055T, 2 x GTX 285s, HDDs (TBD), 2 x G.S. F3-12800CL7D-2GBPI, OCZ 700W Modular, XP Pro SP2
KestrelFlight v1.0 >> (To Be WC’ed v2.0) Zalman Z7+, MSI NF980-G65, PII X4 1055T, 2 x Galaxy 580GTXs, Zalman 32GB SSD, WD V'Raptor 300GB, G.S. F3-16000CL9D-4GBTD, Zalman ZM1000-HP Plus , Win7
Oz1a v2.0 >> XFX MDA72P7509 750a, PI X2 8870BE, 2 x XFX GTS250, WD 250GB, F2-8500CL5D-2GBPK, Tt TR2 600W, XP Pro SP3
As of 04/29/11
Celtic Spirit >> (Under Construction / WC’ed) >> Antec SX1200, MSI 890GXM-E65, PII X6 1055T, 2 x GTX 285s, HDDs (TBD), 2 x G.S. F3-12800CL7D-2GBPI, OCZ 700W Modular, XP Pro SP2
KestrelFlight v1.0 >> (To Be WC’ed v2.0) Zalman Z7+, MSI NF980-G65, PII X4 1055T, 2 x Galaxy 580GTXs, Zalman 32GB SSD, WD V'Raptor 300GB, G.S. F3-16000CL9D-4GBTD, Zalman ZM1000-HP Plus , Win7
Oz1a v2.0 >> XFX MDA72P7509 750a, PI X2 8870BE, 2 x XFX GTS250, WD 250GB, F2-8500CL5D-2GBPK, Tt TR2 600W, XP Pro SP3
1st was the ribbon cable, then came rounded cables, 3rd you had people sleeving cables in various sized clumps (sorta like #2 but prettier), and now it seems the “in mod” is sleeve each individual wire………not really sure how that strikes me, but think it is starting to grow on me.
Does the side panel have "demples" to account for the hsf heatpipe ends??![]()
As of 04/29/11
Celtic Spirit >> (Under Construction / WC’ed) >> Antec SX1200, MSI 890GXM-E65, PII X6 1055T, 2 x GTX 285s, HDDs (TBD), 2 x G.S. F3-12800CL7D-2GBPI, OCZ 700W Modular, XP Pro SP2
KestrelFlight v1.0 >> (To Be WC’ed v2.0) Zalman Z7+, MSI NF980-G65, PII X4 1055T, 2 x Galaxy 580GTXs, Zalman 32GB SSD, WD V'Raptor 300GB, G.S. F3-16000CL9D-4GBTD, Zalman ZM1000-HP Plus , Win7
Oz1a v2.0 >> XFX MDA72P7509 750a, PI X2 8870BE, 2 x XFX GTS250, WD 250GB, F2-8500CL5D-2GBPK, Tt TR2 600W, XP Pro SP3
As of 04/29/11
Celtic Spirit >> (Under Construction / WC’ed) >> Antec SX1200, MSI 890GXM-E65, PII X6 1055T, 2 x GTX 285s, HDDs (TBD), 2 x G.S. F3-12800CL7D-2GBPI, OCZ 700W Modular, XP Pro SP2
KestrelFlight v1.0 >> (To Be WC’ed v2.0) Zalman Z7+, MSI NF980-G65, PII X4 1055T, 2 x Galaxy 580GTXs, Zalman 32GB SSD, WD V'Raptor 300GB, G.S. F3-16000CL9D-4GBTD, Zalman ZM1000-HP Plus , Win7
Oz1a v2.0 >> XFX MDA72P7509 750a, PI X2 8870BE, 2 x XFX GTS250, WD 250GB, F2-8500CL5D-2GBPK, Tt TR2 600W, XP Pro SP3
These builds are too clean! Here's something messy for you guys. Hope you enjoy.
Mobo: ga-h55n-usb3
cpu: i5 760 @ 3.8ghz (will go higher, but the board will kick the bucket)
RAM: G.Skill DDR3 ECO 1600 7-8-7-24
Cooling: Thermalright AXP-140 w/ 120mm San Ace
The PSU in my SG07 died, so I'm running a 1kw psu while its being RMA'd. It's all I had sitting around.![]()
You must [not] advance.
Current Rig: i7 4790k @ stock (**** TIM!) , Zotac GTX 1080 WC'd 2214mhz core / 5528mhz Mem, Asus z-97 Deluxe
Heatware
How about a SKT A version!!![]()
![]()
As of 04/29/11
Celtic Spirit >> (Under Construction / WC’ed) >> Antec SX1200, MSI 890GXM-E65, PII X6 1055T, 2 x GTX 285s, HDDs (TBD), 2 x G.S. F3-12800CL7D-2GBPI, OCZ 700W Modular, XP Pro SP2
KestrelFlight v1.0 >> (To Be WC’ed v2.0) Zalman Z7+, MSI NF980-G65, PII X4 1055T, 2 x Galaxy 580GTXs, Zalman 32GB SSD, WD V'Raptor 300GB, G.S. F3-16000CL9D-4GBTD, Zalman ZM1000-HP Plus , Win7
Oz1a v2.0 >> XFX MDA72P7509 750a, PI X2 8870BE, 2 x XFX GTS250, WD 250GB, F2-8500CL5D-2GBPK, Tt TR2 600W, XP Pro SP3
Changed my power supply. (Cougar before, Fan was broken)
Installed 3 Noiseblocker XK1 (The Thermaltake Fans were to loud)
2500K @ 4,5 GHz 1,27 V / Venomous X Black / Asus Maximus IV Extreme Z / Kingston HyperX Blu 1333 16GB/ MSI R7970 Lightning BE with AC Xtreme 3 / Asus Xonar DX / Corsair 850W / Samsung 840 EVO + 2TB WD Green / Lian Li P80R
2500K @ 4,5 GHz 1,27 V / Venomous X Black / Asus Maximus IV Extreme Z / Kingston HyperX Blu 1333 16GB/ MSI R7970 Lightning BE with AC Xtreme 3 / Asus Xonar DX / Corsair 850W / Samsung 840 EVO + 2TB WD Green / Lian Li P80R
Bookmarks