http://www.effizienzgurus.de/review/...inleitung.html
I think I'll get my Mora 3 at the end of July/beginning of August.
http://www.effizienzgurus.de/review/...inleitung.html
I think I'll get my Mora 3 at the end of July/beginning of August.
Dont get the mora 2 big... U can buy 2x 480s i think it was for 1x mora...
Another thing I find funny is AMD/Intel would snipe any of our Moms on a grocery run if it meant good quarterly results, and you are forever whining about what feser did?
Made some progress again:
MoRa 3
Aquaero holder, mounted without any screws:
Final pics will be taken soon.
That pics are beautiful.
I really like the tubing between the Heat Killer and the GPU.
well, according to me, 2 straight compression-fittings and a tube would be enough there (same thing without the BP 45°'s)... and you'd get a nicer curve!?Originally Posted by guilleguillaume
doctor pepper's desk
EVGA P55 FTW | i5 650 @ 4GHz | 4Gb Corsair Dominator DDR3-1600 XMS3 | XFX 4870 1Gb | Corsair X32 | Samsung SpinPoint F1 - 320Go | Fractal Design Newton R2 650W | Samsung P2450H | Microsoft Laser Desktop 7000 | JBL Spyro Black
AirCooling: Prolimatech Mega Shadow | Xigmatek Bifrost | Fractal Design SATA Cluster Box | Fractal Design 2x120mm, 2x140mm and 1x92mm
Cosmos-S
Foxconn BloodRage Rev1.1 Bios P07 | i7 920 D0 @ 4,629GHz max & 4,3GHz stable | 6Gb Corsair Dominator DDR3-1600 | XFX 5870 | Sonar X-Fi | Intel X25-M 80 Go PostVille | Samsung SpinPoint F1 - 1To | Corsair HX620W | CoolerMaster Cosmos S | Samsung T240 | Logitech MX-5500 & Z-2300
Watercooling: Laing DDC + plexi top and tank | CPU - HK 1366 rev 3.0 LT | GPU - EK Water Blocks EK FC5870 V2 - Acétal Nickel | MB - Foxconn's original | HDD - HK SilentStar HD-Single rev 2.0 | radiator - 3x120mm | tubing - High Flex 10/16mm | red PrimoChill ICE coolant
Did you notice any change in temps when switching to the MoRa3?
Thank you, man!
well, I would have done this, but it's not possible to put 2 straight EK 16/11 Fittings on the Watercool HK 3.0well, according to me, 2 straight compression-fittings and a tube would be enough there (same thing without the BP 45°'s)... and you'd get a nicer curve!?And this is the nicest solution imho.
Yes, I noticed that the water is about 7°C colder when the fans only run at 500rpm.
I'm not saying it looks bad
that's the problem with compressions... a bit safer (talking about leaks) but way larger than barbs'!
doctor pepper's desk
EVGA P55 FTW | i5 650 @ 4GHz | 4Gb Corsair Dominator DDR3-1600 XMS3 | XFX 4870 1Gb | Corsair X32 | Samsung SpinPoint F1 - 320Go | Fractal Design Newton R2 650W | Samsung P2450H | Microsoft Laser Desktop 7000 | JBL Spyro Black
AirCooling: Prolimatech Mega Shadow | Xigmatek Bifrost | Fractal Design SATA Cluster Box | Fractal Design 2x120mm, 2x140mm and 1x92mm
Cosmos-S
Foxconn BloodRage Rev1.1 Bios P07 | i7 920 D0 @ 4,629GHz max & 4,3GHz stable | 6Gb Corsair Dominator DDR3-1600 | XFX 5870 | Sonar X-Fi | Intel X25-M 80 Go PostVille | Samsung SpinPoint F1 - 1To | Corsair HX620W | CoolerMaster Cosmos S | Samsung T240 | Logitech MX-5500 & Z-2300
Watercooling: Laing DDC + plexi top and tank | CPU - HK 1366 rev 3.0 LT | GPU - EK Water Blocks EK FC5870 V2 - Acétal Nickel | MB - Foxconn's original | HDD - HK SilentStar HD-Single rev 2.0 | radiator - 3x120mm | tubing - High Flex 10/16mm | red PrimoChill ICE coolant
Yeah, that's true, but for me the EK compressions are the best looking fittings on earth
No final pics, but systems nearly final:
With the 24-pin, is it possible to route some of the cables around the back of the reservoir? I'm curious as to what it would look like.
Signatures make my posts look huge... but I'm not humble enough to completely remove my signature, so I kept this note explaining it.
mcp I'm going to build a water cooling rig and I actually decided about getting EK compressions and well I really like the size of your tubing( not too fat and not too thin) so my question is ¿ Which compressions and tubing size are you using?
If it's possible i would like to know because I love the look of them and since I'm new into watercooling I'm don't know about tubing sizes and compressions :P
Last edited by guilleguillaume; 08-27-2010 at 09:06 AM.
Tubing: Primpflex Pro LRT Black Tubing - 7/16 ID - 5/8 OD
Fits great on my EK fittings.
I use 16/11 EK Fittings and 15,9/11,1 mm clear Tygon Tube.
First final pics:
A lot of thanks for the fast response mcp so if I'm not wrong if I want the same look I will have to go with: http://www.aquatuning.es/product_inf...-1mm-klar.html and http://www.aquatuning.es/product_inf...----Black.html
I actually think that this build is one of the most beautiful ones. It have a lot of good details and every part it's well done to match perfectly the black theme, I'm happy to see finished nowthe Aquaero mount since without it it was like I was missing something in the case.
That black chrome compression fitting are just awesome, never seen something similar to them and it makes them so unique. I know I've already told you but another time: I really love the tubing loop between the CPU and the VGA, don't know why I like it so much but it's beautiful
What speed have the fans on the radiator?
And how the loudness, because the MO-RA is quite dense ..
Really nice job mcp/paul!
Reply With Quote
Bookmarks