some pics of my new bullet proof p4ca3+

[deathstar13]

Originally posted by Rio71
hey, good work with the mods.
but you forgot the vagp-mosfet. its the one between agp and pci1.
made an fingertest at full load...
increasing the vagp helps alot on epox boards...

woooo nice tip! i didnt even see the vagp mosfet. i have more ramsinks also and will be doing that tomorow also
ive been told about the vagp tie in with helping ocing,i cant remember which it helps cpu or chipset,anyhow ive been running mine +.1vagp anyhow just for good luck.

im still cpu heat limited till i get my phase change unit in 2 weeks.ive sent bowman 2 PM's over at other place and no responce to either.

i want a inexpensive >$500 unit so if you know anyone with good stuff let me know or ill be visiting kit-tronics for a mach1

perc the pics of the ram are above. 2x kingston value ram pc2700 with hynix bt-43d chips. where circut city or best buy for best bets and you need to shop the stores not online.i found mine from an amd forum member at oc.com who couldnt use them.

here is some updated info on these,260 1:1 @2.64vdimm 2.5-4-4-7 and passed memtest 0 errors.ive not really tried pushing lower timings or higher fsb until i go phase change as i refuse to just melt this chip for benchmarks sake.http://www.xtremesystems.org/forums/...threadid=35343

btw as for the mobo it just rocks and couldnt be more pleased.
i do recomend it and the ram,the prescott i recomend ONLY to people who have h20 or better cooling.