I'm kicking off Rev 1.1 this weekend.

Modifications are:

1) Replacing SLI EK Bridge for BP SLI crystal links
2) New MCR220 rad in the back
3) Adding 1.5mm spacers to stop fittings in the GPU blocks.

RMA'd T-Virus is nowhere to be seen so it'll have to wait for Rev 1.2

New rad should help temps a bit, as well as the spacers and BP links by improving flow - afterall it replaces 14x90 bends (12 in the EK bridge and 2 between CPU and Mosftet_2) into 1 or 2 (inlet to the first GPU block - no way around it, not enough space between card and PSU for anything else).

No pics - it didn't happen - so there you go