Hello everyone! New build 24/7 OC:

4.2GHz HT On VCore 1.26875v bios, 1.264v load, DDR3-1600 6-8-6-20-110-1T 1.6V, QPI/VTT 1.175v 13h Prime95 Blend



Bios Template for Gigabyte X58A-UD3R
Code:
Advanced CPU Features:
CPU Clock Ratio ................................ [21]
Intel(R) Turbo Boost Tech ...................... [Enabled]
CPU Cores Enabled .............................. [All]
CPU Multi Threading .............................[Enabled]
CPU Enhanced Halt (C1E) ........................ [Disabled]
C3/C6/C7 State Support ......................... [Disabled]
CPU Thermal Monitor ............................ [Disabled]
CPU EIST Function .............................. [Disabled]
Virtualization Technology ...................... [Disabled]
Bi-Directional PROCHOT ......................... [Disabled]

Uncore & QPI Features:
QPI Link Speed ..............................[x36]
Uncore Frequency ............................[x16]
Isonchronous Frequency ......................[Enabled]

Standard Clock Control:
Base Clock (BCLK) Control .......................... [Enabled]
BCLK Frequency (MHz) ................................[200]
PCI Express Frequency (MHz) ........................ [100]

Advanced Clock Control:
CPU Clock Drive ..............................[900mV]
PCI Express Clock Drive ................... [900mV]
CPU Clock Skew ............................. [0]
IOH Clock Skew ............................. [0]
PCI Express Frequency (MHz) ........................ [100]

Advanced DRAM Features:
Performance Enhance ...................... [Turbo]
Extreme Memory Profile (X.M.P) ........... [Profile1] 
System Memory Multiplier (SPD) ........... [8.0]
DRAM Timing Selectable (SPD) ............. [Quick]

Channel A + B + C

Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ......................[6]
tRCD ..................................[8]
tRP ...................................[6]
tRAS ..................................[20]
CR.....................................[1]


Advanced Voltage Control:
CPU Intel Core i7 920 D0 Stepping
Load Line Calibration ................. [Level 2]
CPU Vcore ..............................[1.26875v] 
QPI/VTT Voltage 1.150v .................[1.175v]
CPU PLL 1.800v .........................[1.80v] 
PCIE 1.500v ...........................[1.50v]
QPI PLL 1.100v ........................[1.10v]
IOH Core 1.100v .......................[1.10v]
ICH I/O 1.500v ........................[1.50v]
ICH Core 1.1v .........................[1.10v]

DRAM
DRAM Voltage 1.500v .............. [1.60v] 
DRAM Termination 0.750v.......... [Normal]
Ch-A Data VRef. 0.750v ...........[Normal]
Ch-B Data VRef. 0.750v ...........[Normal]
Ch-C Data VRef. 0.750v ...........[Normal]
Ch-A Address VRef. 0.750v ........[Normal]
Ch-B Address VRef. 0.750v ........[Normal]
Ch-C Address VRef. 0.750v ........[Normal]