Originally Posted by Wiggy McShades
These infrared thermography images was taken in a room where the ambient temp was 26C° or so.. even though 120 - 130 would be a nominally safe temperature for a motherboard, I dont know how much more heat can take the "weak chain" on the x58 architeture ( namely all board could be potentially affected ). If u are under air check uor temp asap. It's almost summer. We have already 30C° here.
If that happend while bench under LN2, well that another issue.
Last edited by xXlAinXx; 06-10-2010 at 12:55 PM. Reason: I previously had the BR in the sentence
Know Your Enemy
Working on:
FOXCONN Quantum Force Blood Rage Rev.1.1 Bios P11
A lot.. its able to run 48 hours non-stop in 40°C (40°C in case!). It very durable mobo.. I think that his Fermi is failing, not mobo.. btw. at 97°C you have like 8°C until it starts failing badly.
i7 930 D0 - 4,2 GHz + Megashadow
3x4GB Crucial 1600MHz CL8
Foxconn Bloodrage rev. 1.1 - P09
MSI HAWK N760
Crucial M500 240GB SSD
SeaGate ES.2 1TB + 1TB External SeaGate
Corsair HX 850W (its GOLD man!)
ASUS STX + Sennheiser HD 555 (tape mod)
Old-new camera so some new pics will be there.. My Flickr My 500px.com My Tumblr
I agree
Perhaps, the most!
Anyhow, as "weak chain" in reference the thermal and design for the ICH and smil-package which is positioned just over the fermi VRM and it's rated for alike 105°T/case.
http://www.intel.com/assets/pdf/designguide/319975.pdf
Last edited by xXlAinXx; 06-10-2010 at 02:32 PM. Reason: Sorry, for the ninja edit - I've removed some number which I took out mine ass!
Know Your Enemy
Working on:
FOXCONN Quantum Force Blood Rage Rev.1.1 Bios P11
I think that Fermi should be watecooling only graphic card. I wouldnt risk damaging my PC due overheating. Especially not if its that expensive..
i7 930 D0 - 4,2 GHz + Megashadow
3x4GB Crucial 1600MHz CL8
Foxconn Bloodrage rev. 1.1 - P09
MSI HAWK N760
Crucial M500 240GB SSD
SeaGate ES.2 1TB + 1TB External SeaGate
Corsair HX 850W (its GOLD man!)
ASUS STX + Sennheiser HD 555 (tape mod)
Old-new camera so some new pics will be there.. My Flickr My 500px.com My Tumblr
i'm on my third card. The new bios did help a bit to bring my oc up a bit, but I'm still getting lock ups
----------------------------------------------------
Perhaps, by doesn't knowing anything about your setup - it might be a memory issue and if someone is able to replicate it, I'm sure a fix would eventually arrive :P
Know Your Enemy
Working on:
FOXCONN Quantum Force Blood Rage Rev.1.1 Bios P11
got another 480 just to test with and it was my card causing the lock ups. The new bios has definitely improved stability at 200+ bclck using a 480. The other thing that i found helped was making sure that the heat coming off the back of the card isn't baking the nb.
----------------------------------------------------
Yes, I've hear of northbrige in flames ( I'm not sure if it was a metaphor ) with few of these toy in, so glad that you solved - be careful.
Last edited by xXlAinXx; 06-11-2010 at 10:17 AM.
Know Your Enemy
Working on:
FOXCONN Quantum Force Blood Rage Rev.1.1 Bios P11
Do you have Realtek Network drivers installed ? If so roll them back or completely uninstall them. That was giving me hardlock issues on my single 470. When I received my second 470 to run in SLI I started having lockup issues again and it turned out to be a bios settings where it was on PCI Slot instead of PCIEx for boot up display. I apologize I forget the exact name. I have no idea why it helped but I have been rock stable since then. Both cards are overclocked to stock 480 speeds and on air. I have run kombuster for literally an hour looking for flaws and none. Temps got up and held at 92c and 94c.. that worried me but for an hour Kombuster run, those temps are pretty good.
That would be more issue of Realtek than this mobo, probably can happen on other mobos with same chip aswell.
i7 930 D0 - 4,2 GHz + Megashadow
3x4GB Crucial 1600MHz CL8
Foxconn Bloodrage rev. 1.1 - P09
MSI HAWK N760
Crucial M500 240GB SSD
SeaGate ES.2 1TB + 1TB External SeaGate
Corsair HX 850W (its GOLD man!)
ASUS STX + Sennheiser HD 555 (tape mod)
Old-new camera so some new pics will be there.. My Flickr My 500px.com My Tumblr
What about odd(uneven) UnCore dividers - x17, x19? Can we have them too?
Foxconn BloodRAGE GTI|i7 920(200x21)|6GB Kingston HyperX 1866 CL9(1600 6-7-6)|GTX 470 SLI|WD300HLFS|CM Silent Pro M850
AsRock X58 Extreme3|i7 920(212x19)|6GB Kingston HyperX 1866 CL9(1700 7-7-7)|GTX 460 768 MB|WD300HLFS|Audigy|Chieftec CFT-650-14C
AsRock P67 Extreme4|i7-2500K(45x100)|2x2 HyperX Genesis 1600(1866 9-10-9)|2xGTX 460 768 MB|RAID1 2x1TB Т7K1000.C + WD6401AALS|CM Silent Pro 600
Hello guys,
Does anyone know tell me if you already have some date for the release of the P10 BIOS?
Why I updated here for the G40 version and only had problems with it. Computer does not recognize any of my two hard drives. The problem is that my video card GTX 470 is coming, and I do not know what to do now.
My rig: [i7-990X ES w/AC MX-4 @ 4.5GHz by Prolima Super Mega / Fox x58 BloodRage P11 / Sapphire CFX HD 7970 OC
A-Data v2.0 2200MHz C8 / A-Data v2.0 1866MHz C8 / Dom.GT 2000C7GTF / Kingston 2000MHz D3T1K3/6GX (All IC Hypers)
Plextor M5S 128Gb Raid0 / WD 4x VelociRaptor 300Gb (10K) WD3000HLFS / Asus Xonar Essence STX / Seasonic 860 Platinum
Cooler Master Cosmos II UT w/10x Noctua P12 fans + 2x P14 FLX + 2x Scythe GT P-15 (1850) / BenQ XL2420T 24" 120Hz
S&S 6g, 7H, Sensei Rubber, 9HD, QcK / Tt Meka G1 / Logitech G5 v2 / Razer Destructor / Puretrak Talent / Senn HD598]
*My English
well all the p10 will be g40 so if you having problem with that you will with p10
you the only person to report a problem with G40 so not sure what to say
Carl, I am getting System freeze after about 1-2 hours.
I went to Stock setting with my System but it won't help, I am trying some stuff and if it won't work I'll go back to G13
Just when I get the fix for one problem, another ones comes around
PC: Intel Core i7 920 D0 | Kingston Hyperx T1 6GB 2000Mhz 8-8-8 RAM | Foxconn Bloodrage GTI | Sapphire 4870X2 | Perc 5/i - WD 640AAKSx4 RAID0 | Asus 2014L1T | Dell 2407WFP | Lian Li G70 Silver Watercooled
WaterCooling: Q² Project by The-Fox
CPU Loop: Swiftech Apogee GTZ | Feser X-Changer 480 | Swiftech MCP655 Vario w/ DetroitAC top | EK Multioption RES 250 Rev.2 | Tygon R3603 1/2" | YL D12SL@1350RPM x4
GPU Loop: EK-FC4870 X2 Nickel | Swiftech MCR320 | Swiftech MCP655 Vario w/DetroitAC top | EK Multioption RES 150 Rev.2 | Tygon R3603 1/2" | YL D12SL@1350RPM x3
hard to know what causes your freeze
my machine has now been running for 3 weeks with no reboot with that bios and using my raid card that it fixed
I tried raising the Ram voltage to 1.65 from default of 1.60, raised the CPU Voltage from default to +0.30 and disabled CxE.
So fat it looks O.K, we wil lsee how it goes through the night.
I am suspecting the Ram voltage or the CPU voltage were too low for some reason.
PC: Intel Core i7 920 D0 | Kingston Hyperx T1 6GB 2000Mhz 8-8-8 RAM | Foxconn Bloodrage GTI | Sapphire 4870X2 | Perc 5/i - WD 640AAKSx4 RAID0 | Asus 2014L1T | Dell 2407WFP | Lian Li G70 Silver Watercooled
WaterCooling: Q² Project by The-Fox
CPU Loop: Swiftech Apogee GTZ | Feser X-Changer 480 | Swiftech MCP655 Vario w/ DetroitAC top | EK Multioption RES 250 Rev.2 | Tygon R3603 1/2" | YL D12SL@1350RPM x4
GPU Loop: EK-FC4870 X2 Nickel | Swiftech MCR320 | Swiftech MCP655 Vario w/DetroitAC top | EK Multioption RES 150 Rev.2 | Tygon R3603 1/2" | YL D12SL@1350RPM x3
Posting Permissions
Reply With Quote
Bookmarks