800D Blood+ Project

[manu_D]

Hi Noeru

I did not say to you anything. I also possess Corsair 800D (that I like). Your remark is very sensible!
Things are so made, we cannot always gather all the advantages. He arrives however, that pass right by the perfection without obtaining him...it is sometimes contrary! Especially when we spent many efforts to reach there.

Noeru, I want to make you thanks. I followed your worklog since the beginning, and I have very minutely and for a long time studied the photos which you made of Obsidian. And it is with your help, thanks to you, that I discovered how the case was consu...and I bought it.
I continue to follow all your updates. In particular the improvement consisting in modifying the position of the power supply to install one radiator 120.4 interests me a lot. It is as well the modification as I thought of making.

Very attractive photo of Airu

[ScottALot]

A dog and a high performance GPU together ... you're in my version of heaven haha!

[manu_D]

A small correction : When I wrote "I did not say to you anything", I thought of saying "I did not say everything to you, tell you all my story"!
Before any thing, it is my English which needs perfection!

[noeru]

Thank you　all
Sorry for my bad English

[noeru]

[noeru]

Set woterBlock

[noeru]

[aka_GK]

EK made me drool with these blingy backplates, really love them
sick hardware noeru, will get the same cut in a half and in other color soon

[noeru]

EK made me drool with these blingy backplates, really love them
sick hardware noeru, will get the same cut in a half and in other color soon

Hi aka_GK
Like you said

[manu_D]

Hi Noeru

Beautiful body, and impressive mechanics. Thank you for photos.
Bravo!

[ipuoL]

the cards come out very nice and the fluid looks good, but the tubes .. will you change these ones? Because they let the nice red glue pink and a little bit misty

[imersa]

Love the colour of the fluid. Suits the build very well!

[Blacky]

Hey neoru which is the measurement between bottom & zone division plate (where you have the the XSPC 220 rad)? Could a SR-1 rad could fit standing down there (5.2")?

[noeru]

Hi Noeru

Beautiful body, and impressive mechanics. Thank you for photos.
Bravo!

hi manu_D
Thank you happy

the cards come out very nice and the fluid looks good, but the tubes .. will you change these ones? Because they let the nice red glue pink and a little bit misty

hello　ipuoL　

LED lights for the front, I see a strong pink

Love the colour of the fluid. Suits the build very well!

very very thanks BooldyRED is TFC F-1 RED+Purple+Blue　mix

Hey neoru which is the measurement between bottom & zone division plate (where you have the the XSPC 220 rad)? Could a SR-1 rad could fit standing down there (5.2")?

Hello　Blacky
XSPC　RX the width 125m / m, HWLabs SR-1 is 153m / m process without entering so is.
Besides I XSPC HWLabs GTX · GTS · SR-1 I did not tried all
The height of the base about 128m / m is.

[Church]

153mm wide SR1 is one for 140mm fans. SR1 for 120mm fans is 133mm wide (but probably too wide anyway).

[noeru]

153mm wide SR1 is one for 140mm fans. SR1 for 120mm fans is 133mm wide (but probably too wide anyway).

hi churchy
yes this rad 12cm fan
Sheraudo structure for the side that is, I have a large margin

https://www.coolinglab.co.jp/index.p...roducts_id=576

[noeru]

I am the MIPS RAM Cooler 6 'Corsair Edition' I make friends with the head of the acrylic.
http://www.mips-computer.de/
CAD for that

[Blacky]

Hello　Blacky
XSPC　RX the width 125m / m, HWLabs SR-1 is 153m / m process without entering so is.
Besides I XSPC HWLabs GTX · GTS · SR-1 I did not tried all
The height of the base about 128m / m is.

Oh! so the SR-1 won't fit Orz

I guess I'm going with XSPC since MCR220 won't fit either (128m) would be kinda risky!

Thanks Noeru /bow

[imersa]

Been following lots of 800D builds as my friend is doing the same.
This has to be one of the best i've seen! Love the work mate!

[noeru]

Been following lots of 800D builds as my friend is doing the same.
This has to be one of the best i've seen! Love the work mate!

Hello imersa
Thank you　I get that nice little reference, we will promote the

[Blacky]

Hey Noeru do you have a photo of the zone division plate alone?

[noeru]

Hey Noeru do you have a photo of the zone division plate alone?

Hi Blacky Sorry for the late

Version of the picture looked a partition, but it was no

[Blacky]

Thanks noeru

[disruptfam]

great build

[LeandroJVarini]

The colours look perfect to me!

beautiful Nice job!