Originally posted by umekami10
Thanks everyone

Macci

There is no way to achieve higher FSB in this ABIT board…Multiplier 13.5 and 14 do not work…over 220 FSB… I can of course run 250MHz low multiplier(under 10)…but no use...





@SAE

I got that chip a few weeks ago and tried to test it with every possible “cooling means” I got.....

I found the following results:

2550-2600 MHz Air cool
2650-2700 MHz H20
3100-3150 MHz (modified prometiea)
3200-3300 MHZ Dry Ice
3400-3500 MHz LN2


By the way You are absolutely right about 24/7


BUT:

First was testing then arose knowledge…

The best way to find out if it is problematical or not to use LN2 is to test it. I recommend you to try LN2 and tell us later what you finding….


If you like the results of Dry Ice and Prometiea look at this page...

http://forum.sweclockers.com/showthr...ight=umekami10
Mod the hell out of the board! Do the 3 in 1 mod. 240 is easily doable