HERE - Try this...

[Smoke]

Do you insulate ALL the VGA?....
Nowadays Rams are cold bugging like crazy you know....
I used to put 3 or 4 layers of insulation tape and guess what did I discovered with the 5870 one!
NO INSULATION at all as for me for all new cards from now on......

I just plastic spraying them a LOT - BUT A LOT - and I just put the LN2 pot on them and that's it.....

When you fully double/triple insulate them, the PCB get's more freezed inside and the rams runs a LOT colder and they cold bugging....

I encoded this problem yesterday during my tests at full LN2 -190*C and at core frequency 13xxMHz when the PCB around the core took that white colour of snow , reached the rams and then the rams started cold bugging....

In such a case I have to put them on the mod I did as for the 5870 to warm them up a bit....

I'll retry it one of these days and I'll see...

I insulate rubber eraiser all VGA exept PWMs and other power side... Also I use neopren)
What is plastic spraying?)
I try hard voltmod for Vmem but it is not help to much...

I checked Your new bios. It has bug with overclocking memory. Tried AburnerX and EVGA Presicion but it can't overclock memory. You need to fix it) Also I cached blackscreens in Vantage when core clock was more than 1110mhz.

[Splave]

I insulate rubber eraiser all VGA exept PWMs and other power side... Also I use neopren)
What is plastic spraying?)
I try hard voltmod for Vmem but it is not help to much...

I checked Your new bios. It has bug with overclocking memory. Tried AburnerX and EVGA Presicion but it can't overclock memory. You need to fix it) Also I cached blackscreens in Vantage when core clock was more than 1110mhz.

+1 teammate having the same issue. any insight?

[Jor3lBR]

I checked Your new bios. It has bug with overclocking memory. Tried AburnerX and EVGA Presicion but it can't overclock memory. You need to fix it) Also I cached blackscreens in Vantage when core clock was more than 1110mhz.

Seems that the latest ABextreme version solves the issue give it a try: http://downloads.guru3d.com/Afterbur...load-2562.html

[BaRaN]

Thanks hipro5

Seems that the latest ABextreme version solves the issue give it a try: http://downloads.guru3d.com/Afterbur...load-2562.html

Tried AburnerX and EVGA Presicion but it can't overclock memory. You need to fix it) Also I cached blackscreens in Vantage when core clock was more than 1110mhz.

i have this problem too

i can not overclock memory and 1.6 afterburner is not work too any Suggestion?

[Jor3lBR]

Thanks hipro5





i have this problem too

i can not overclock memory and 1.6 afterburner is not work too any Suggestion?

Use Hipro's BIOS #1 + ABE 1.6 and make sure you restart the system.