X48 Rampage Formula Preview.

[SoLoR]

@SoLoR

The SoundMAX driver 6600 crashed after 4 hours of Prime95 Blend and UT2004.

how did it crash? and dunno i didnt have any issues personaly, maybe just some wierd random isssue... or better, blame soundmax drivers being updated once/year... i so wish i had a realtek or via, since they have drivers every month

[Alien Grey]

how did it crash? and dunno i didnt have any issues personaly, maybe just some wierd random isssue... or better, blame soundmax drivers being updated once/year... i so wish i had a realtek or via, since they have drivers every month

BSOD resulting in broken SoundMAX driver. Maybe the 6600 aren't good for the Supreme FX II and I should try the 6590 again to see if they are stable.

[OLDcomer]

I thought this thread was for overclocking, not for sound drivers

q9650@4500MHz(9x500) 1.45V LinX Stable

[Alien Grey]

I thought this thread was for overclocking, not for sound drivers

q9650@4500MHz(9x500) 1.45V LinX Stable

It's for everything except defaults.


Congrats mate with your 4.5GHz LinX stable overclock.

[Antineutrino]

I thought this thread was for overclocking, not for sound drivers

q9650@4500MHz(9x500) 1.45V LinX Stable

OMG...
You MADE it!



Can you share with us your BIOS setting?

Thanks!


Cheers!

[OLDcomer]

ASUS Rampage Formula BIOS 0802 9x500 Template

*Extreme Tweaker*
Ai Overclock Tuner [Manual]
CPU Ratio Setting [9]
FSB Strap to North Bridge [333Mhz]
FSB Frequency [500]
PCIE Frequency [100]

DRAM Frequency [DDR2-1202MHz]
DRAM Command Rate [2N]
DRAM CMD Skew on Channal A [Greyed Out]
DRAM CMD Skew on Channal B [Greyed Out]
DRAM CLK Skew on Channal A [Auto]
DRAM CLK Skew on Channal B [Auto]

DRAM Timing Control [Auto]
DRAM Static Read Control [Disabled]
Ai Clock Twister [Lighter]
Ai Transation Booster [Manual]
Common Performance Booster [7]

Pull-In of CHA PH1 [Disabled]
Pull-In of CHA PH2 [Disabled]
Pull-In of CHA PH3 [Disabled]
Pull-In of CHA PH4 [Disabled]
Pull-In of CHA PH5 [Disabled]
Pull-In of CHA PH6 [Disabled]
Pull-In of CHB PH1 [Disabled]
Pull-In of CHB PH2 [Disabled]
Pull-In of CHB PH3 [Disabled]
Pull-In of CHB PH4 [Disabled]
Pull-In of CHB PH5 [Disabled]
Pull-In of CHB PH6 [Disabled]

CPU Voltage [1.475] Vdrop pencil moded
CPU PLL Voltage [1.50]
North Bridge Voltage [1.73]
DRAM Voltage [1.80]
FSB Termination Voltage [1.46]
South Bridge Voltage [AUTO]
SB 1,5V Voltage [AUTO]
Loadline Calibration [Disabled]
CPU GTL Voltage Reference [AUTO]
NB GTL Voltage Reference [0.67x]
DRAM Controller Voltage REF [AUTO]
DRAM Channel A Voltage REF [AUTO]
DRAM Channel B Voltage REF [AUTO]

CPU LED Selection [CPU Voltage]
NB LED Selection [North Bridge Voltage]
SB LED Selection [South Bridge Voltage]
Voltiminder LED [DISABLED]

CPU Spread Spectrum [Disabled]
PCIE Spred Spectrum [Disabled]
CPU Clock Skew [Delay 100ps]
NB Clock Skew [Normal]


*Advanced settings*
CPU Ratio Setting [9]
C1E Support [Disabled]
CPU TM Function [Disabled]
Vanderpool Technology [Disabled]
Execute Disable Bit [Disabled]
Max CPUID Value Limit [Disabled]
Intel(R) SpeedStep (TM) Tech. [Disabled]