MMM
Results 1 to 25 of 59

Thread: OCing on a Budget

Hybrid View

  1. #1
    Registered User
    Join Date
    May 2010
    Location
    Soviet Canuckistan
    Posts
    9
    Quote Originally Posted by zanzabar View Post
    u could do 5ghz if u are in Siberia or some ware else were u could do sub 0c by being outside, anythig near room temp on the stock cooler i wouldent expect over 4ghz with turbo and thats pushing it. the stock cooler is not upgraded to an OEM cooler to be quiet sure u could use it to be quieter but thats only since it has way more cooling power and surface area so u dont as high RPMS to get the air flow that u need but thats not to say that u cant shove some deltas onto a good cooler and get even better cooling
    I know a few tricks that some of you would never do, especially if you value your computer, one of these was putting 2 pieces of tin foil underneath the heatsink after removing all heat paste, that alone decreased the CPU temperature by 3 degrees, another little mod i made was bodging an old pentium MMX 1 inch fan with wood screws into the stock northbridge of the 939dual-sata2, it worked quite well and probably led to my excess overclocking of that board(especially when that fan failed..)..

  2. #2
    I am Xtreme zanzabar's Avatar
    Join Date
    Jul 2007
    Location
    SF bay area, CA
    Posts
    15,871
    Quote Originally Posted by AuToFiRE View Post
    I know a few tricks that some of you would never do, especially if you value your computer, one of these was putting 2 pieces of tin foil underneath the heatsink after removing all heat paste, that alone decreased the CPU temperature by 3 degrees, another little mod i made was bodging an old pentium MMX 1 inch fan with wood screws into the stock northbridge of the 939dual-sata2, it worked quite well and probably led to my excess overclocking of that board(especially when that fan failed..)..
    well, i have liquid cooling and im not heat limited, there are many others here with the same limitations. sure i dont have an x6 yet but unless u chip really cold like sub 0c the transistors just cant operate that fast without some exotic cooling. i dont think that u have what kind of forum this is down, a good chunk of people lap cpus and have what most would consider exotic cooling and they are not getting the p2 over 4-4.2ghz without using sub ambient cooling so even if u do max out air cooling u have no chance at 5ghz unless u are in some kind of snow covered waste land (i guess a desert at night would also work)

    and u should use silver leaf not tin foil if u are going to do that, but there are things better like liquid metal pro or indigo extreme
    5930k, R5E, samsung 8GBx4 d-die, vega 56, wd gold 8TB, wd 4TB red, 2TB raid1 wd blue 5400
    samsung 840 evo 500GB, HP EX 1TB NVME , CM690II, swiftech h220, corsair 750hxi

  3. #3
    Registered User
    Join Date
    May 2010
    Location
    Soviet Canuckistan
    Posts
    9
    I know the transistor issues and things like that (Galazar designs microchips) and ive gotten to play with multimillion dollar servers to intel development kits, to my favourite, this
    *quarter million dollar frisbee*

    My friends at Galazar say it can be done, it just all depends on how well you share the load throughout the motherboard, how many cubic feet of air can be moved and how efficiently you can expel the heated air out of the case

  4. #4
    Xtreme Enthusiast
    Join Date
    Nov 2007
    Location
    Cincinnati, Ohio
    Posts
    614
    Quote Originally Posted by AuToFiRE View Post
    *quarter million dollar frisbee*
    What makes that a $250,000 frisbee? Did not think wafers were anywhere near that much money.


    I will take your bet. Need pictures of the setup running and screen shots showing settings and readings. Or a video would be best.

    Good Luck, you will need it.
    Aaron___________________________Wife________________________ HTPC
    intel i7 2600k_____________________AMD5000+ BE @ 3ghz___________AMD4850+ BE @ 2.5ghz
    stock cooling______________________CM Vortex P912_______________ Foxconn A7GM-S 780G
    AsRock Extreme 4_________________ GB GA-MA78GM-S2H 780G_______OCZ SLI 2gb PC6400
    4gb 1600 DDR3___________________ OCZ Plat 2GB PC6400___________Avermedia A180 HDTV tuner
    MSI 48901gb 950/999______________Tt Toughpower 600w___________ Saphire 4830
    Corsair HX620____________________ inwin allure case___________ ___ Coolmax 480w
    NZXT 410 Gunmetal________________Acer 23" 1080p________________ LiteOn BD player
    X2gen 22" WS
    ________________ ________________________________ nMediaPC 1000B case

  5. #5
    Xtreme Addict
    Join Date
    Apr 2007
    Location
    canada
    Posts
    1,886
    Quote Originally Posted by AuToFiRE View Post
    I know a few tricks that some of you would never do, especially if you value your computer, one of these was putting 2 pieces of tin foil underneath the heatsink after removing all heat paste, that alone decreased the CPU temperature by 3 degrees, another little mod i made was bodging an old pentium MMX 1 inch fan with wood screws into the stock northbridge of the 939dual-sata2, it worked quite well and probably led to my excess overclocking of that board(especially when that fan failed..)..

    and those would be ???? btw try 5ghz on extreme air on a dual core phenom II if you seceed then try it with a quad see if its any harder then the dual core repeat with a thuban


    Quote Originally Posted by AuToFiRE View Post
    sorry if im a little confusing right now theres a few concerns about my girlfriend being pregnant so im trying to get my mind off it so please bear with me, now, if you think that i will fry my CPU before i even get close to 5GHz, then please take my bet, place down your chips because I love a good challenge, if you feel its going to take a toll on the computer then i will jsut take it a bit slower, but I am a betting man and I want to try, and hey, its only a $300 processor, if i fry it i can easily get a new one. but i bet you all a picture of me in my girlfriends blue panties and blue lace bra if i fail, if i succeed on the otherhand, i want recognition and an apology from everyone so far saying they were wrong =P

    maybe a pic of your gf in said lingerie would be better ..
    Last edited by Sn0wm@n; 06-03-2010 at 02:07 AM.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •