UPDATE TIME!!!!

Guess what? I spent 3 hours today on tapping holes 3hours, 20 holes!!!:jawdrop:
I cannot feel my hands, but it was worth it of course
I tapped all holes for panels, job done! Now, I made few photos to show you how the Tower looks closed, only thing is I don't have anough screws right now - decided to make more holes, after I felt confortable to do all the tapping So rear and side panels have 6 holes each, front one has 8. I thought that as long as know now how to tap, I can add more holes to make the panels structure more secure. So photos show panels with 2 screws each..for now Also some of the edges may not stick to the frame, cause of those missing screws... Anyway, I still wanted to show you how this Tower is going to look like. I hope you gonna enjoy those photos











Here's how the dvd hole looks like with front panel attached... I tried to fit in the drive and it fix perfectly!




Some of the holes need small corrections, but most of the edges align nicely...




Some sweat, blood and tears have been sacrificed during today's hard work on those holes.. here you can see one of them.. nicely tapped




This is the panel I haven't showed before - it is front wall of power chamber - with prepared holes for two SSD drives - mounting and cable holes on the left. Top rectangular hole is for dvd cable that will go to the top...

Before...



..and after






At the end few photos of nice panel window holes






next move will be correcting all holes, screwing all the bolts to make sure all works fine with those panels. Then I need to work on pump stand... till next weekend!!! :thumb: