Results 1 to 25 of 4313

Thread: UnOfficial Asus Rampage II Extreme Thread

Hybrid View

  1. 05-02-2010, 04:25 PM #1
    Shadowthor
    Shadowthor is offline
    Xtreme Member
    Join Date
    Jun 2008
    Posts
    114
    Does anybody have one usb header (on the mb) not working? I was wondering if it is a bios issue or hardware defect considering it was all working till now.
    Reply With Quote Reply With Quote
  2. 05-02-2010, 11:10 PM #2
    ElAguila
    ElAguila is offline
    Xtreme Member
    Join Date
    Jul 2005
    Posts
    294
    Is there a trick to getting the ide controller working on this mobo? I plugged a drive that I wanted to pull data from and move it over to my sata drive. I didn't see anything in the bios about enabling the ide controller. I only saw settings for the sata. Is it hidden at the bottom of one of the screens or is there a jumper on the mobo? The drive works in another system. I plug into this sytem and it is not even detected in the bios.
    ASUS Rampage II
    Core i7 920 D0 @ 4.2GHz
    Corsair TR3X6G1600C8 3x2GB DDR3 1600MHz
    Radeon 5870
    Raid 0 2x1TB WD on SATA 3/4
    Seagate 160GB on SATA 1
    LG Bluray ROM/DVD RW
    Corsair HX1000W
    Reply With Quote Reply With Quote
  3. 05-03-2010, 12:16 AM #3
    madmax999
    madmax999 is offline
    Xtreme Member
    Join Date
    May 2008
    Location
    Croatia, Varazdin
    Posts
    150
    Send a message via MSN to madmax999 Send a message via Skype™ to madmax999
    You have an option in BIOS to enable IDE controller, I'm 100% sure...
    Intel i7 920 D0 @ 4.2GHz 1.27V under TRUE Black || Asus P6T|| 3x1GB Corsair Dominator 1600MHz + 3x1GB Mushkin 1600MHz || Powercolor Radeon HD4870X2 2GB DDR5 || WD's Black (1+0.5)TB & Green 1TB || Corsair TX650 || Samsung 245B+ || Windows7 7600 RTM x64

    Reply With Quote Reply With Quote
  4. 05-03-2010, 01:52 AM #4
    SwIeRsZcZ
    SwIeRsZcZ is offline
    Registered User
    Join Date
    Mar 2009
    Location
    Poland
    Posts
    63
    Send a message via Skype™ to SwIeRsZcZ
    Anyone have an idea why increasing IOH / ICH voltages make my board unbootable ?? Only at 1.11 - 1.12 i can boot to Win being at 210x21...

    PS.

    HARDWARE PREFETCHER - enabled or disabled ?
    Adjacent Cache line Prefetch - enabled or disabled ?
    A20M - enabled or disabled ?
    Last edited by SwIeRsZcZ; 05-03-2010 at 01:54 AM.
    Core i7 i920 @4.4Ghz (BCLK209x21) @ 1.39v 24/7 | H2O
    Asus Rampage 2 Extreme X58
    G.Skill Pi Black 3x2GB @1659Mhz 1.65v
    SSD Vertex 120GB & Intel G2 80GB & HDD WD Caviar Black 1TB
    Logitech Illuminated & G500 & Steelseries 5L
    Dell 2209WA
    Reply With Quote Reply With Quote
  5. 05-03-2010, 05:55 AM #5
    Brama
    Brama is offline
    Xtreme Member
    Join Date
    Jun 2004
    Location
    Milano - Italy
    Posts
    480
    Quote Originally Posted by SwIeRsZcZ View Post
    PS.

    HARDWARE PREFETCHER - enabled or disabled ?
    Adjacent Cache line Prefetch - enabled or disabled ?
    A20M - enabled or disabled ?
    Enabled
    Enabled
    Disabled
    Reply With Quote Reply With Quote
  6. 05-03-2010, 05:00 AM #6
    ElAguila
    ElAguila is offline
    Xtreme Member
    Join Date
    Jul 2005
    Posts
    294
    Quote Originally Posted by madmax999 View Post
    You have an option in BIOS to enable IDE controller, I'm 100% sure...
    That is what I thought but for the life of me I could not find it. I will look again today after my brain has gotten cleared from staring at a blue screen with white writing.
    ASUS Rampage II
    Core i7 920 D0 @ 4.2GHz
    Corsair TR3X6G1600C8 3x2GB DDR3 1600MHz
    Radeon 5870
    Raid 0 2x1TB WD on SATA 3/4
    Seagate 160GB on SATA 1
    LG Bluray ROM/DVD RW
    Corsair HX1000W
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules