AMD "Thuban" Core (Phenom II X6) XS Overclocking Charts

[crazydiamond]

nice results lightman!

[Lightman]

nice results lightman!

Thanks!

Now I'm dialling in NB clocks. Either 3GHz @1.25V is unstable or my HTT doesn't like to be @2.6GHz. But so far I'm getting feeling it's HTT because mostly crashes on 3D stuff.

At the moment I'm stable with NB2.8GHz @1.2V


Not STABLE, but benchable:


Uploaded with ImageShack.us

4.42GHz on AIR all 6 cores

[Daveburt714]

Lightman: Glad you got your new gear! Looks like it's running really nice for ya..

You can go a little higher on your IMC volts if you need too, as long as load temps stay around 53c (at least that was the temp stability zone on 965's).

Anything up to 1.3 should be fine for 24/7 clocks, and some folks push all the way up to 1.5.
I ussually just take small steps up in V's until I see deminishing returns...

[Lightman]

Lightman: Glad you got your new gear! Looks like it's running really nice for ya..

You can go a little higher on your IMC volts if you need too, as long as load temps stay around 53c (at least that was the temp stability zone on 965's).

Anything up to 1.3 should be fine for 24/7 clocks, and some folks push all the way up to 1.5.
I ussually just take small steps up in V's until I see deminishing returns...

I have similar approach
Slowly but steadily I will go up, then I will shoot really high to eventually settle for best performance/acceptable power ratio.
So far I'm really happy at 3.8GHz 1.3V with 4.2GHz 1.45V turbo. Sweet setting and very stable!

Later on I will need to enable C'n'Q, but for that I need stock multi which means a bit of HTT clocking. I think it will be even funnier