DFI UT X58-T3EH8 continued - Part 2

[nickless]

FINALLY PLL VOLTS FIXED with 29/4/2010 bios realised today!This is the first bios with intels 6 core cpu support that dont have a bug at pll volt option for this mobo congratulations Now lets focus on the pwm problem from my search(google etc) 2 people with a burned mobo the one posted here!and 4 people burned because they tried to reseat the pwm heatsink because they had crazy pwm temps!its time for me to choose.....waiting to burn?or reseat the pwm heatsink?if happens the first or course as you can see at Blacknach's post dfi is gonna tell me ok burned no guaranty!if i remove the heatsink and reapply tim or just to check what is wrong there again no guaranty...so either it is or isn't your fault one thing is sure NO guaranty btw pwm area smells more and more day by day like a burned chip/trace something bad is comming i feel it

Finally good news from DFI about clear bios, I've to try it. Now if they put B2B CAS# Delay it will be great

I've removed the pwm heatsink without any problems when I put it under water.


The PWM heatsink is gripped not so tight as to damage the regulator (at least on my motherboard). When I removed the heatsink screws, without any effort it is peeled off from the PWM. Even noticed that there was not good contact between the cooler and PWM. If you work carefully, I see no reason to worry about removing the heatsink. My board is working until now without any problems, but this pwm area smell in your case is not good indication indeed.
Good luck
And sorry for my English!