MMM
Page 43 of 48 FirstFirst ... 3340414243444546 ... LastLast
Results 1,051 to 1,075 of 1189

Thread: *** Official Radeon HD5800 Series Overclocking Thread ***

  1. #1051
    Xtreme Addict
    Join Date
    Apr 2006
    Location
    Cairo
    Posts
    2,366
    Quote Originally Posted by pvhk View Post
    1050/1350 vgpu@1.279v:
    Your PCI-E is running @ 8x
    Intel Core I7 920 @ 3.8GHZ 1.28V (Core Contact Freezer)
    Asus X58 P6T
    6GB OCZ Gold DDR3-1600MHZ 8-8-8-24
    XFX HD5870
    WD 1TB Black HD
    Corsair 850TX
    Cooler Master HAF 922

  2. #1052
    Xtreme Enthusiast
    Join Date
    Sep 2005
    Location
    DFW
    Posts
    991
    Quote Originally Posted by LuckyX2 View Post
    Hey guys, I just bought a powercolor 5850 pcs+ on sale at zipzoomfly for $270.

    It has a non-reference board and I was wondering what's the best way to overclock it? Can the non-reference boards be overclocked through a bios mod or am I limited to just a hardware mod.

    Also, if I perform a hardware over-volt, does that voltage then get applied to both 2D and 3D clocks? I would like to keep the low power consumption in 2D but up the volts for 3D.

    So is there any way to increase just the 3D voltage on a non reference 5850?
    Thanks
    I too would like to know this 0,o

    Quote Originally Posted by freecableguy
    I'll come blow on your heatsink for a dollar. Thats pretty ghetto
    Quote Originally Posted by Xeon th MG Pony
    sorry to sound harsh but so would you if some one asked if nitroglycerin was a good coolant for his car!
    Check out my forum: http://www.anarchyst-it.com

  3. #1053
    Registered User
    Join Date
    Aug 2008
    Posts
    27
    From what I've gathered, the powercolor 5850 pcs+ has a voltage regulator that doesn't allow for adjustment, it just switches between the voltage registers. I read that this powercolor model has a slight voltage increase over stock, so it might help you to achieve better overclocks as well. Some online reviews of this card have shown overclocks up to 950 core. You wouldn't be able to change voltage through the bios either.

    There are a few threads on XS about doing hard-mod's, I wouldn't know too much about it as I haven't done it. I would expect that all voltages would increase.
    i5-750 - 200x20 - 4.0ghz - L003B806 - Vcore 1.328V - VTT 1.19V
    Xigmatek 1283 - scythe s-flex 1600

    Gigabyte P55A-UD3 - F8 BIOS
    2x4GB Super Talent DDR3-1066@1200mhz CAS 8 - 1.5V

    ATI AMD 5850 - 950/1175 - 1.17V

    CM Storm Scout

    OCZ 600W ModXStream Pro

  4. #1054
    Xtreme Member
    Join Date
    Jul 2009
    Location
    Poland
    Posts
    281
    someone has a pcb shots of his 5850 icooler version? it could help me with oc.

  5. #1055
    Registered User
    Join Date
    May 2005
    Location
    Brisbane
    Posts
    25
    im just wondering if many people have had 5850s die after using vGPU of around 1.2v and higher. sorry if its been discussed (too many pages)
    GAMER....i5 650 modded s775 danger den @ 4464mhz....4gb gskill trident @ 2126mhz...asus P7P55D....MSI 5850....black ice extreme 240x120 wc loop
    BENCHER....i5 670 vapochill LS....P55A UD6....a-data 2000x 2x2gb....antec 750w (thanks to SNAPPY1)
    electronics workbench....DSE oscilloscope
    breadboard circuits: 4-bit binary to decimal decoder with 1 digit 7 seg display

  6. #1056
    Registered User
    Join Date
    May 2009
    Posts
    26
    Hye guys, need to ask to those who achieved clocking HD5870 to 1000/1300 in stock HSF, didn't your VRM temp shoots very high? I'm trying to find solutions for that but my country is not selling the VRM-R4 and VRM-R5 heat sink for time being, so anybody found any other method should I just leave it like that and worry less about it?

    Thanks~

  7. #1057
    Registered User
    Join Date
    Apr 2010
    Posts
    84
    Have a question to ask regarding the clocks I am getting on my 5870. Trying to figure out what the official stock voltages are.. Keep reading it is 1.125 and other places say it is 1.162. Using Afterburner it shows 1.162. But just to test I ran it at 1.125 to see how far it would go with just that voltage. Hit 990 easy on stock. This is what I got below... (Ran the kombustor multiple times)



    My question is if 1.162 is stock what is safe to push the voltage on a 5870? Because it looks like I have some headroom.

  8. #1058
    Xtreme Enthusiast
    Join Date
    Jul 2008
    Location
    Germany, Stuttgart
    Posts
    549
    My 5970 running @ 1100/1300 @ 1,412V


  9. #1059
    Wpprriimmee crrraaazzzyyy
    Join Date
    May 2009
    Location
    Alabama
    Posts
    1,804
    Nice 5970 clocks! Was that on the stock cooler?
    Heatware



    Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
    Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
    Stuff I used to have:
    Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
    XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600

    "In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart

  10. #1060
    Xtreme Member
    Join Date
    Jan 2010
    Location
    Outside of Detriot
    Posts
    396
    Quote Originally Posted by Linuxfan View Post
    Nice 5970 clocks! Was that on the stock cooler?
    No, he is on H2O.

  11. #1061
    Xtreme Enthusiast
    Join Date
    Jul 2008
    Location
    Germany, Stuttgart
    Posts
    549
    Yes!
    It was an EK!


  12. #1062
    Registered User
    Join Date
    Feb 2005
    Posts
    28
    Quick question.

    What is a sensible voltage to run a 5870 at, with water. Low temps, 50's at load for V reg and cores.

    Usually I'm happy with 0.1v over stock. What are the expereinces at 1.35 with these cards.

    What is the highest factory set voltage on the premium range of cards?

  13. #1063
    Xtreme Enthusiast
    Join Date
    Mar 2009
    Posts
    605
    here is mine at 1.35V on GPU's it will run Vantage at 1090, dX11 games and Dx11 benches at 1070. at 1062Mhz I have played most of my games, Crysis, Crysis warhead, mass effect and 2, COD 4 and 5 BF2, and Dragons age for hours on end an no issues. makes me wonder why the hell I waited 6 months to get the 5870...

    Email/web browsing PC
    MM Ascension case, 24/7 settings
    Classified, 980x @ 4,525Mhz, HT on 1.39V
    (3) ATI 5870's@ 1062Mhz
    G skill perfect storm RAM s 6gb, 2,176 Mhz CAS 8
    (4) intel x25m RAID 0
    CPU loop, EK supreme HF, EK mobo block, 500MM bitspower res, 2 DDC 3.25's on XSPC top, 2 XSPC RX 360's, 1 XSPC RX 480, GPU loop, EK water blocks, with nickel backs, 2 swiftech mcr 320's, 500MM bitspower res, ddc 3.25, XSPC top all with 1850 RPM gentle typhoons
    plus many other rigs.

  14. #1064
    Registered User
    Join Date
    Dec 2009
    Posts
    6
    My 18221 in Vantage with my 5850 with MSI 5870 bios .

    Last edited by alyns; 05-02-2010 at 08:48 AM.

  15. #1065
    Registered User
    Join Date
    Nov 2009
    Posts
    16
    is there a thread like this but for the 4800 series ???

  16. #1066
    Registered User
    Join Date
    Nov 2009
    Posts
    16
    Quote Originally Posted by Esajuppeli View Post
    Can you raise the voltage of XFX HD5870 XXX, model with fan in the middle?
    Same problem here, can't make the voltages budge. Using the ASUS version bios.

  17. #1067
    Xtreme Enthusiast
    Join Date
    Feb 2010
    Posts
    701
    Fan in the middle is not reference and can't softmod bios afaik. Sorry.
    slowpoke:
    mm ascension
    gigabyte x58a-ud7
    980x@4.4ghz (29x152) 1.392 vcore 24/7
    corsair dominator gt 6gb 1824mhz 7-7-7-19
    2xEVGA GTX TITAN
    os: Crucial C300 256GB 3R0 on Intel ICH10R
    storage: samsung 2tb f3
    cooling:
    loop1: mcp350>pa120.4>ek supreme hf
    loop2: mcp355>2xpa120.3>>ek nb/sb
    22x scythe s-flex "F"

  18. #1068
    Xtreme Addict
    Join Date
    Mar 2006
    Location
    Sydney , Australia
    Posts
    1,600
    Guys, I have seen a few hwbot scores using 1100+ on WC 5870 core clock, do many clock this high? Do they need higher than 24/7 voltages to get over 1000? I have been offered one locally but it can only do 1050 at 1.3v, is this typical? I will be water cooling if this influences the clocks much.
    Last edited by aussie-revhead; 05-08-2010 at 10:22 AM.
    Bencher/Gamer(1) 4930K - Asus R4E - 2x R9 290x - G.skill Pi 2200c7 or Team 2400LV 4x4GB - EK Supreme HF - SR1-420 - Qnix 2560x1440
    Netbox AMD 5600K - Gigabyte mitx - Aten DVI/USB/120Hz KVM
    PB 1xTitan=16453(3D11), 1xGTX680=13343(3D11), 1x GTX580=8733(3D11)38000(3D06) 1x7970=12059(3D11)40000(vantage)395k(AM3) Folding for team 24

    AUSTRALIAN DRAG RACING http://www.youtube.com/watch?v=OFsbfEIy3Yw

  19. #1069
    Xtreme Member
    Join Date
    Jan 2010
    Location
    Outside of Detriot
    Posts
    396
    Quote Originally Posted by aussie-revhead View Post
    Guys, I have seen a few hwbot scores using 1100+ on 5870 core clock, do many clock this high? Do they need higher than 24/7 voltages to get over 1000? I have been offered one locally but it can only do 1050 at 1.3v, is this typical?
    Some may get that high, but I'm sure he was using some extreme cooling methods. YES. YES.

  20. #1070
    Xtreme Addict
    Join Date
    Mar 2006
    Location
    Sydney , Australia
    Posts
    1,600
    OK, I should clarify, I want to water cool so I was looking at wc results.
    Bencher/Gamer(1) 4930K - Asus R4E - 2x R9 290x - G.skill Pi 2200c7 or Team 2400LV 4x4GB - EK Supreme HF - SR1-420 - Qnix 2560x1440
    Netbox AMD 5600K - Gigabyte mitx - Aten DVI/USB/120Hz KVM
    PB 1xTitan=16453(3D11), 1xGTX680=13343(3D11), 1x GTX580=8733(3D11)38000(3D06) 1x7970=12059(3D11)40000(vantage)395k(AM3) Folding for team 24

    AUSTRALIAN DRAG RACING http://www.youtube.com/watch?v=OFsbfEIy3Yw

  21. #1071
    Xtreme Member
    Join Date
    Jun 2005
    Location
    France
    Posts
    357
    MSI R5870 lightning on air @1.299v

  22. #1072
    Registered User
    Join Date
    Nov 2009
    Posts
    16
    Quote Originally Posted by Esajuppeli View Post
    Can you raise the voltage of XFX HD5870 XXX, model with fan in the middle?
    NO it does not. This is the absolute worst 5870 GPU that you can get. There is NO difference in benchmarks even after overclocked. It has no adjustable voltage regulators. I have this one, and I'm going to RMA this piece of soon.

  23. #1073
    Aint No Real Gangster
    Join Date
    Jun 2004
    Location
    Port Credit/GTA, Ontario, Canada
    Posts
    3,004
    So i got the msi 5850 oc edition. running at 900mhz core stable with stock volts/cooling.
    Specs
    Asus 780i Striker II Formula
    Intel E8400 Wolfdale @ 4050Mhz
    2x2GB OCZ Platinum @ 1200Mhz 5-4-3-18
    MSI 5850 1000Mhz/5000Mhz
    Wester Digital Black 2TB
    Antec Quatro 850W

    Cooling
    Swiftech Apogee
    Swiftech MCP-600
    HardwareLabes Black Ice Extreme 2


    Audio Setup
    X-fi w/AD8066, Clock mod, & polymer caps > PPAV2 > Grado SR60 & Grado SR325i & Beyerdynamic DT770 Pro & Beyerdynamic DT990 & AKG K701 & Denon D2000

  24. #1074
    Registered User
    Join Date
    Apr 2004
    Posts
    46
    ASUS 5870 @1.299v and i3-530 all on air

  25. #1075
    Registered User
    Join Date
    Mar 2010
    Location
    Baltimore, MD
    Posts
    75
    here's mine, Powercolor 5870. I'm starting to get a bit more daring and giving it a workout.

    P6X58D Premium - i7 930 @ 4.2GHz - Water - 3x2G SuperTalent, DDR3-2000 (8-8-8-24) - PowerColor 5870 - Coolermaster Silent Pro 850w -
    Water Cooled XSPC RS360 - Swiftech Apogee XT - Komodo 5870 - Lian-Li A70F

Page 43 of 48 FirstFirst ... 3340414243444546 ... LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •