DimasTech Bench Tables V2.5

[TBahre]

Hey dimas, last time I checked in on the table that supports multiple rads was about 3 weeks ago. Any more info on these?

Or... is it possible with the current easy 2.5 setup to mount multiple rads in a vertical position? Such as the following.

Original intended rad setup:


Vertical rads (can this be done?):

[Lunait]

Round corners are nicer.

I agree. Part of the Dimastech trademark style I think

Dimas, any ideas on pricing for the Mini benchtable?

[Dimas]

Hey dimas, last time I checked in on the table that supports multiple rads was about 3 weeks ago. Any more info on these?

Or... is it possible with the current easy 2.5 setup to mount multiple rads in a vertical position? Such as the following.

Original intended rad setup:


Vertical rads (can this be done?):

Hello, next lot of tables is coming in end april/ begin may so hope we can supply you the dual rads one...
about this kind of mount, it is possible to realize, the spacing between rads it's enough for this radiators mounting.
about Mini Table, have find time to sketch it, need to find more time to take on 3D...and maybe that we have some quote

[TBahre]

Thanks for the reply dimas, I'm going to wait it out for the next lot of tables for the multiple rad support as you say. It should actually work out well as I hope to have my rampage III extreme about the same time those tables are ready.

[Lunait]

about Mini Table, have find time to sketch it, need to find more time to take on 3D...and maybe that we have some quote

I have a Solidworks 2009 3D model of the case, if that's of any help.
If you make a prototype, I can try it out

[Dimas]

I have a Solidworks 2009 3D model of the case, if that's of any help.
If you make a prototype, I can try it out

let's go for the deal...pm me detail, so we can go on from a existing point...and let the work be a little bit more easy...
the peripheral to add are decided and spacing too,if we can share some piece with existing version will be good too...


waiting for you

PS if everyone have nice ideas around there...we bring em to real...eheh...

[Dimas]

A very famour Italian Modder, take our table as inspiration for his own last work...let's show some pics from the mod lab..



worklog link, italian language but pics talks better that what is write, and launguage barrier, possible to follow here: http://forum.nexthardware.com/moddin...-mino-way.html

some pics taken random









and 2 videos for first startup, more detailed pics at the Fair it's about to be exibited.
first power ON
RadioComand Test

[FatAlbert]

I discussed my ideas couple posts earlier with Lunait so I am waiting for sketches and for real mini bench table

[Lunait]

let's go for the deal...pm me detail, so we can go on from a existing point...and let the work be a little bit more easy...
the peripheral to add are decided and spacing too,if we can share some piece with existing version will be good too...


waiting for you

PS if everyone have nice ideas around there...we bring em to real...eheh...

I have sent you an e-mail (to info@dimastech.it) with the solidworks file.

[lkiller123]

Stay tuned for more!

I saw this somewhere in the WCing forum and I think this (double rad mount) might be a nice addition to your design, Dimas

[Asmola]

Thanks Dimas, I received my Dimsatech Bench / Table Test v2.5 Hard Inox this week!
Also writed a little review, you can find it from here: http://translate.google.com/translat...64&sl=fi&tl=en

Review behind the link is translated with google translate and translation isn't perfectly correct.

Here some pic's:






Thanks again Dimas, keep up good work!

[DosDuoNo]

let's go for the deal...pm me detail, so we can go on from a existing point...and let the work be a little bit more easy...
the peripheral to add are decided and spacing too,if we can share some piece with existing version will be good too...


waiting for you

PS if everyone have nice ideas around there...we bring em to real...eheh...

just to say this straight i want one of these tables, i love your tables but felt it was a bit big, as my computer table was to small for it, if you are making this Dimas, give me a PM.

we can then talk money and stuff, i dont mind paying up front for this size of table for you to ship it too me when done,

ohh and that fake carbon fiber might be a nice option

let me know what you want to do, but no dought i want one of these consider it a pre- order

[lkiller123]

Dimas Easy 2.5@Home
Soon review...

Hi Dimas, is this the color "Milk White" that's listed on the product page on your website? It looks fantastic!

[Dimas]

Hi Dimas, is this the color "Milk White" that's listed on the product page on your website? It looks fantastic!

yes it is...some development on Mini have begin...
thanks for your comments DosDuoNo, that always help to see people like...and again..thanks Asmola, nice pics and if you want, the white protection under the table is removable, we left on just for not damage mirror effect on the back

[Church]

Dimas: i got one perverse idea. To make benchtable rackmountable and be usable with some rackmount rails. - for cases/for benchers where there are several such benchstations, so that it can be easily slided out on rails from rack with all the components for changing/maintenance .. is such idea stupid? If compared to filled clutered desk with several laying side by side, or stacked one on to other i always liked cleanliness and compact housing of server hardware in racks .. though then again, how many have several, how many do simultaneous tests/benchrans at same time?

[snoro]

Dimas: i got one perverse idea. To make benchtable rackmountable and be usable with some rackmount rails. - for cases/for benchers where there are several such benchstations, so that it can be easily slided out on rails from rack with all the components for changing/maintenance .. is such idea stupid? If compared to filled clutered desk with several laying side by side, or stacked one on to other i always liked cleanliness and compact housing of server hardware in racks .. though then again, how many have several, how many do simultaneous tests/benchrans at same time?

what you could also do is take a cheap server 1u or 4u case cut the top panel and weld or screw your bench table to the server case and have a bench table that can slide in a server rack.

[Asmola]

I already removed those, I kept those just for not to get any scratches to table while installing and turning it round and round!

thanks Asmola, nice pics and if you want, the white protection under the table is removable, we left on just for not damage mirror effect on the back

[Darth_Penguin]

I saw this somewhere in the WCing forum and I think this (double rad mount) might be a nice addition to your design, Dimas

That looks familiar

[Bodkin]

Just ordered mine form aqua-tuning, cant wait

[TBahre]

Just ordered my asus rampage iii from newegg! Now all that is missing is the benchtable that supports multiple rads...

[Lunait]

let's go for the deal...pm me detail, so we can go on from a existing point...and let the work be a little bit more easy...
the peripheral to add are decided and spacing too,if we can share some piece with existing version will be good too...

waiting for you

PS if everyone have nice ideas around there...we bring em to real...eheh...

I was thinking that it might be a good idea to make cutouts on the sides of the case, to be used as handles for carrying (see picture). Or would that make the case too weak to hold the motherboard and components on top? Also, how do we prevent people from cutting their fingers off when trying to lift it?

[$@39@]

Thanks Dimas, I received my Dimsatech Bench / Table Test v2.5 Hard Inox this week!
Also writed a little review, you can find it from here: http://translate.google.com/translat...64&sl=fi&tl=en

Review behind the link is translated with google translate and translation isn't perfectly correct.

Here some pic's:






Thanks again Dimas, keep up good work!

Just got mine too!! Thanks Dimas for helping with the team-order made with sofos1990. It's pretty awesome. I'll post some photos when I return to benchbase

[Church]

..Also, how do we prevent people from cutting their fingers off when trying to lift it?..

Imho simpliest/cheapest would be cutout top border to be shallow U shape and bend it to the inside and upwards .. in U shape .
There are also "c" form rubber pieces that can be put on top of cut. But result will be probably less of a looker.

[lkiller123]

Just ordered my asus rampage iii from newegg! Now all that is missing is the benchtable that supports multiple rads...

I think you can "custom order" them.

I was thinking that it might be a good idea to make cutouts on the sides of the case, to be used as handles for carrying (see picture). Or would that make the case too weak to hold the motherboard and components on top? Also, how do we prevent people from cutting their fingers off when trying to lift it?

They already have cutoffs on the side. One side supports 3x120 rad, another side is an opening.

[TBahre]

I think you can "custom order" them.

Actually these are something that Dimas has been working on for awhile now.

Last I heard from Dimas:

Hello, next lot of tables is coming in end april/ begin may so hope we can supply you the dual rads one...