lost the CPU Turbo option in Bloodrage... how to restore?

[saaya]

oh yeah it does... some is stored in another chip...
i think powering off the psu or removing the psu and removing the bios battery for 5 mins should solve the problem...
you can also use the vbat jumper if you cant remove the battery easily

wonder if this does the trick... i didnt think this kind of info is stored outside the bios...

[xXlAinXx]

If after the initial period of adjustment the circuit for the voltage state detect a TTL delay, there's some chance that the thermal protection would glitch and eventually lead the software, to read the register as "sticked".
This does not prevent the Intel Turbo Boost to operate correctly. The onchip circuit is just cutting out the ability to access some critical hardware function via reroute request.
Take mine explanation with a proper clamps and keep in mind: this is perhaps triggered by a bug introduced with the release 25 and above.
It is for sure evident on the 28, which I' m using by long. Anyhow, it's heartily advised to reset the data configuartion while switching BIOS revision,
and, for restore the CPU internal configuration, you should traffic a little more with the battery discarge to dry out completely the board.
If this happens repeatedly, you may also need to check your ground and/or if some minor short circuit are in some way preventing a good signal.