Intel Core i7 980X -Round number one! (Pifast, 3DM05 overall and 3DM05 single GPU WR)

[Halo_003]

Congratz! Sick results. How much of a difference was there between load/idle on LN2 with that monster?

[SF3D]

If you mean temperatures, not much.

Current pot design can hold load really well and drop is like max 10c in 1024M Wprime. During Vantage CPU test worst temperatures were around -177C°.

[Halo_003]

Wow that's not much. Good work!

[SV1SH]

an excellent result!!!!

[SF3D]

By the way.. I did some final tuning for my CPU pot design. Now the design is ready to be published

[zalbard]

What's the batch number of this CPU?

[SF3D]

This is ES CPU, so the batch is not important I guess

[FatAlbert]

so when we will see cpu pot and new scores ?

[SF3D]

so when we will see cpu pot and new scores ?

Might take some time unfortunately. I have 3 events planned for next month and only 1 normal weekend. So, I will try to show some scores as soon as possible

[FatAlbert]

take your time SF3D!

what about pot ? :P

[saaya]

what about pot ? :P

nah, hes into alcohol...

[ryba]

Pot will be soon First I must sharpen my penknife

[BustaH]

Lol ^^^^....great stuff Petri, that must have been a real buzz that day getting those scores.

[FatAlbert]

nah, hes into alcohol...

ryba, waiting for first shots of new pot and firsts tests

[SF3D]

sascha!

Lol ^^^^....great stuff Petri, that must have been a real buzz that day getting those scores.

Thanks! Believe me it was a great day / days.

Will some of you UK guys come to Gadget show in Birmingham?

[dinos22]

that is one sick mofo of a CPU
wish mine would work past -150 as it scaled with cold up to that

what sort of vcore were you getting through that vantage run at 6090Mhz? was it similar to CPUs or lower/higher?

[SF3D]

that is one sick mofo of a CPU
wish mine would work past -150 as it scaled with cold up to that

what sort of vcore were you getting through that vantage run at 6090Mhz? was it similar to CPUs or lower/higher?

I did not measure the exact voltages during heavy load, but it should be pretty close to what it is in the pictures. CPU test can be passed at 6180MHz and 1.893V, but a little bit lower freq and Vcore with 4 x GPU.

Yes, my Q3QP was doing over 6500MHz on 2D, but it was too hard to control with fluctuatinc cold bug around -145C° - -155C° This is so easy to use.. just like AMD

[dinos22]

it's a tricky temp around 155 cause next slightly bad poor and you could be looking at -170 if you did at least one overfill before heheheh

with -150 to -155 on my setup i just dont want the pot to see above that so that its harder for the temp to go much lower and is all good heheh
one thing i liked about UD7 is no matter what type of crash and restart i had i didnt have to reset the machine or deal with CBB it would fire up every time with my OC settings and be stable which was nice for a change lol....nothing worse than needing to bring the temp up without a torch lol to fire up again heheheh...that s me

[BustaH]

sascha!



Thanks! Believe me it was a great day / days.

Will some of you UK guys come to Gadget show in Birmingham?

When is it? I will try to be there. ......edit just seen its in april, we are doing the uk leg of GOOC on 16th so not sure if I can be there but have fun!

[G H Z]

5mo of hell...ouch

You'll still go and play with the samples next time around though :p

[SteelRat]

Awesome power of Gulftown and nice speeds. Waiting more results

[Benny Lodewijk]

Awesome Petri ! and i like your pot....

[SF3D]

it's a tricky temp around 155 cause next slightly bad poor and you could be looking at -170 if you did at least one overfill before heheheh

Exactly! Actually my current pot can be controlled easily at those temps, but you would need to have slave for doing it Or else you will have sore wrist pretty soon

one thing i liked about UD7 is no matter what type of crash and restart i had i didnt have to reset the machine or deal with CBB it would fire up every time with my OC settings and be stable which was nice for a change

Sounds nice! I hope to see that board in my house soon.

When is it? I will try to be there. ......edit just seen its in april, we are doing the uk leg of GOOC on 16th so not sure if I can be there but have fun!

Well, maybe some of UK overclockers will visit us in there

5mo of hell...ouch

You'll still go and play with the samples next time around though :p

Mark! I need markencoder V.1.0 to read your post

Awesome power of Gulftown and nice speeds. Waiting more results

Thanks! New scores are coming sooner or later

Awesome Petri ! and i like your pot....

Thanks! That is the old revision in the pic. New product looks slightly different and perform even better

[clo007]

Amazing freaking scores!!!

[kagula323]

Nice scores! How is gonna act the pot on DICE? and the price