UnOfficial Asus Rampage II Extreme Thread

[Ezequiel18]

Hi community , im new to this forums, and im also new to overclocking with i7 , i had a 775 platform before and it was totally different to overclock.

I tried to overclock myself , i read almost all pages with the settings of all the people who posted here and i tried to came up with a result and settings i could use on my pc.

First of all i leave my pc STATS :

i7 920 on air , TR Ultra extreme with 2 fans.
RAMPAGE II EXTREME
GSKILL TRIDENT 3x2GB ddr3 2000 mhz trichannel kit
Sapphire HD4890 1GB safe overclock no OV 965/1150 , max overclock with OV 1050/1200
Cooler master RealPowerPro 850w
Cooler master HAF 932 Case

Here are the settings im trying now , i dont know why , but i cant seem to boot into windows even. Meaning that its a totally failure.

"BOOTMGR IMAGE DAMAGED ERROR , SYSTEM CANNOT BOOT" something like that ( i knew it was due the overclock and not my windows damaged , becasue it fixed when i set everything to default again)

That happened with the next settings , ( i tried to lower ram frec to see if my problems were ram.)

AI overclock - [manual]
OC from CPU level up - [auto]
OC from Memory level up - [auto]
CPU Ratio setting - [21]

CPU configuration
CPU Ratio Setting - [21]
C1E Support - [disable]
Hardware prefetcher - [enable]
Adjacent Cache line prefetcher - [enable]
Intel Virtualization tech - [disabled]
CPU TM Function - [disable]
Execute Disabled bit - [disabled]
Intel HT Technology - [enable]
Active Processor Cores - [all]
A20M - [default]
Intel Speedstep tech - [disable]
Intel Turbo Mode tech - enable (Not shown if Speedstep is disabled)
Intel C-STATE tech - [disabled]
BCLK frequency - [200]
PCIE frequency - [108]
DRAM frequency - [DDR3 1200MHz] this is the lower setting the memory let me set
UCLK frequency - [4009MHz]
QPI frequency - [auto]

Dram timing control (REALLY NEED HELP ON THIS MATTER)
1st iformation - [9-9-9-AUTO]
2nd information - [all auto]
3rd information - [all auto]

EPU II phase control - [full phase]
Load-line calibration - [enable]
CPU differential amplitude - [auto]
Extreme OV - [disabled]

Current voltage
Cpu voltage - [1.2625v]
CPU PLL voltage - [auto]
QPI-Dram voltage - [1.35v]
Current voltage 1.131v - 1.508v - 1.111v - 1.508v

IOH voltage - [1.15v]
IOH PCIE voltage - [1.5v]
ICH voltage- [1.15v]
ICH PCIE voltage - [1.5v]


DRAM Bus voltage - [1.65v]
DRAM REF voltage - [auto]

Debug mode - [string]
Keyboard TeakIt comtrol - [disabled]

CPU spread spectrum - [disabled]
PCIE spectrum - [disabled]
CPU clock skew - [auto]
IOH clock skew - [auto]

-----------------------------------------------

May i please have some help ? sorry i know i suck , its just i cant get it work


Greetings community