Update 2

Hi guys.

Yeah I've decided to just go for a single loop for now, with the 4x120 rad cooling my CPU, Chipsets and Mosfets. I'm not gonna be oc'ing the GPU for now, so until I see it a problem, I'll stick with the single loop

So since I last updated, I've done a fair amount of work on the PC.

I finished my Rad, and bolted it into the case. Gonna use bitspower fittings all over, I want the best



Here's a poor pic of the Rad bolted in, with the pump roughly in the position I want it. You might also notice the soundproof foam I've stuck into the front of the PC. Trying to keep things quiet!

I got my parts back from the powder coating, and what a finish! Didn't cost too much either, which is always good





I've decided to use Enermax Everest fans for a bit of light cooling at the back of the case, they're independently regulated so I can just leave them running.

I bought a Midplate too, to give a proper finish to the bottom of the case. So today's job is to cut this down and drill it



Thanks guys!