~Intel Core i3/i5 32nm Dual Core OverCLARKing Thread~

[radaja]

got it to 4750 w/HT with QPI@5000. but im having a hardtime getting it to
boot at 20x250@5000 w/Ht on and QPI@5000. going to try it as just a duallie.

http://valid.canardpc.com/show_oc.php?id=1061955

18x250@4500 DDR3-2000 10-11-10-24 1t QPI@5000

**Prime95 Blend*******Prime95 Blend******SuperPi32m*****
**1 Hour 22 Min*********Stopped*******EverestCache&Memory


http://valid.canardpc.com/show_oc.php?id=1062003

19x250@4750 ddr2000 10-11-10-24 1t Qpi@5000
SuperPi 32m and Everest Cache & Memory Benchmark


heres my exact bios settings for the 4750 run for the H55m-UD2H users

Advanced Frequency Settings

CPU Clock Ratio...........[  19  ]

QPI Clock Ratio..........................[  x40  ]
QPI Link Speed...........................[  10.0 ]

Standard Clock Control

Base Clock (BCLK) Control................[Enabled]
BCLK Frequency ..........................[250]
Extreme Memory Profile (X.M.P.)..........[Disabled]
System Memory Multiplier (SPD)...........[  x8  ]
Memory Frequency (MHz).....................[ 2000 ]
PCI Express Frequency (MHz)..............[ 101 ]

Advanced Clock Control 

CPU Clock Drive..........................[ 800mV]
PCI Express Clock Drive..................[ 900mV]
CPU Clock Skew...........................[  0ps ]
PCH Clock Skew...........................[  0ps ]

Advanced Memory Settings

Extreme Memory Profile (X.M.P.)..........[Disabled]
System Memory Multiplier (SPD)...........[ x8 ]
Memory Frequency (MHz)....................2000
Performance Enhance   (SPD)............. [Turbo]
DRAM Timing Selectable (SPD)............ [Expert]

Channel A & B

Channel A Timing Settings            [Press Enter]:
Cas Latency Time........................[10]
tRCD....................................[11]
tRP.....................................[10]
tRAS...................................[24]

>>>>>   Advanced Timing Control

tRC....................................[33]
tRRD...................................[4]
tWTR...................................[5]
tWR....................................[10]
tWTP...................................[22]
tWL....................................[8]
tRFC...................................[76]
tRTP...................................[5]
tFAW...................................[20]
Command Rate (CMD)......................[ 1T ]
Static tRD......................................[12]

Advanced Voltage Settings

>>> CPU
Load Line Calibration....................[Enabled]
CPU Vcore..................1.19375v......[1.397v ]
QPI/VTT Voltage............1.100v........[1.35v]
Graphics Core................1.10v........... [0.20v]

>>> MCH/ICH
PCH Core....................1.050v.....[1.12v]
CPU PLL......................1.800v.....[1.800v]

>>> DRAM
DRAM Voltage..............1.500v.....[1.62v]
DRAM Termination.........0.750v.....[Normal]
Ch-A Data VRef............0.750v.....[Normal]
Ch-A Data VRef............0.750v.....[Normal]
Ch-B Data VRef............0.750v.....[Normal]
Ch-B Data VRef............0.750v.....[Normal]

Advanced Core Features

CPU Cores Enabled........................[All]
CPU Multi-Threading......................[Enabled]
CPU Enhanced Halt (C1E)..................[Disabled]
C3/C6/C7 State Support...................[Disabled]
CPU Thermal Monitor......................[Disabled]
CPU EIST Function........................[Disabled]
Bi-Directional PROCHOT...................[Auto]

enjoy

[zsamz_]

nice to see ya hit 2k with the ram radaja