Project Raven ATCS 840

[wyzard]

i also have a atcs 840 i plan to watercool.
i was wondering what rads to put in w/o drill/cut.

i can surely put a triple on top and perhaps a double beside the hdd.

but did you put the pa160 on the 220mm intake fan? does it fit directly on the 200-220mm fan holes?

also does anyone knows what distance is between the screw holes for the 140mm fan? i know for 120mm fan is 10.5 mm

thanks

[astrodanco]

i also have a atcs 840 i plan to watercool.
i was wondering what rads to put in w/o drill/cut.

i can surely put a triple on top and perhaps a double beside the hdd.

Absolutely you can put a 120.3 in the top and a 120.2 behind the drive cages. You might even be able to put a 120.3 behind the drive cages.

[ohms]

i also have a atcs 840 i plan to watercool.
i was wondering what rads to put in w/o drill/cut.

i can surely put a triple on top and perhaps a double beside the hdd.

but did you put the pa160 on the 220mm intake fan? does it fit directly on the 200-220mm fan holes?

Yes that is indeed a PA160 on the 200mm intake, it doesn't line up that I was able to mount it into the fan but I used double sided velco to hold it on and used a 160>120mm shroud on the other end. It worked quite nicely.

As for mounting a double beside the HDD cage, it didn't work out for me. I tried that originally but I found that the Swiftech 120x2 rad was a smidgon too big to make it fit using the fan bracket supplied by Coolermaster.

I didn't try any other 120x2 radiators but you may want to look into that if you are against any drill/dremel work.


On a side note, the hand etching work for my new side panel is nearly done and I have replaced the red sata cables with some black rounded cables and added some other goodies like a 12" blue cold cathode and replaced the 200mm front fan with a blue LED version.