http://valid.canardpc.com/show_oc.php?id=1027710 << ok here you go
http://valid.canardpc.com/show_oc.php?id=1027710 << ok here you go
Last edited by SkullCracka; 02-19-2010 at 12:42 AM.
I'm pretty proud of mahself! There's still lots to do to tighten it up.
==========================================
XClio 1000, Gigabye GA-MA790XT-UD4P
AMD Phenom II 955BE @3.2 GHz, Noctua NH-D14
CORSAIR 950TX 950W, 4GB Corsair XMS3 DDR3 1600
Sapphire 4850x2 CFX
Win7 Ultimate
Originally Posted by stangracin3
Not bad cpu speed but you need to work on the nb and ram. Keep it up!
Ryzen 3800X @ 4.4Ghz
MSI X570 Unify
32GB G.Skill 3600Mhz CL14
Sapphire Nitro Vega 64
OCZ Gold 850W ZX Series
Thermaltake LV10
It it prime Stable????
Because it´s ok 4.0ghz (20x200), if 1.392V
perfect.
Rum PRIME 95 or LinX man...!
I'm pretty proud of mahself! There's still lots to do to tighten it up.
IT IS PRIME STABLE??? TEST IT!!!
I'll do some tweaking on it tonight. Cinebench crashed it twice lastnight so I brought down the multi to something more stable. At least I know it's capable of 4ghz out of the box, on air, and with minimal voltage modification.
Edit:
I managed to hit 4.0 and a stable Cinebench 11.5. Unfortunately, at a 20x multiplier, it requires a Vcore of 1.50... I'll approach from a different angle later tonight.
Last edited by aythrea; 02-20-2010 at 05:28 PM.
==========================================
XClio 1000, Gigabye GA-MA790XT-UD4P
AMD Phenom II 955BE @3.2 GHz, Noctua NH-D14
CORSAIR 950TX 950W, 4GB Corsair XMS3 DDR3 1600
Sapphire 4850x2 CFX
Win7 Ultimate
Got out my old Foxconn A79A-s (790FX) board and put it back into my rig with the 965 (C3) to see what would happen . I got a nice 24/7 clock 4 Ghz @1.425v NB@ 2600Mzh memory DDR2 1066. The Nb not as high as alot you
guys are running but 2600Mzh running nice and stable prime blem for 2 hours with windows media player going and cruzing the net the hole time.
Phenom II 965 C3 @ 4 Mhz @1.4375v prime95 stable
Asus CrossHair III Formula
Cooler Master Aquagate Max cpu cooler
Patriot AMD Black ED. ddr3-1333 OC 1600 8-8-8-20-28 (2x2GB)
2600NB@1.350v 2200HT@1.206v
2 Asus 5850s running in crossfire
2 WD 320gig SATA-2 hard drives raid-0
PC Power & Cooling 750w Silencer Crossfire ED.
Asus DVD Burner
Cooler Master HAF932 AMD Limited ED. case
Acer 21.5" LCD 1920x1080P
windows 7-64 bit
Very nice result...whats the bbatch no?
I'am sorry Mav2000 i just through the thing together and have not look at the Bacth No. but i'am moving everything into a new case and when i get it done i get the number off the cpu then.
Phenom II 965 C3 @ 4 Mhz @1.4375v prime95 stable
Asus CrossHair III Formula
Cooler Master Aquagate Max cpu cooler
Patriot AMD Black ED. ddr3-1333 OC 1600 8-8-8-20-28 (2x2GB)
2600NB@1.350v 2200HT@1.206v
2 Asus 5850s running in crossfire
2 WD 320gig SATA-2 hard drives raid-0
PC Power & Cooling 750w Silencer Crossfire ED.
Asus DVD Burner
Cooler Master HAF932 AMD Limited ED. case
Acer 21.5" LCD 1920x1080P
windows 7-64 bit
Love the clocks peeps. I'm tempted to build a 965 C3 under air for my next main rig.
Next 555 C3
@X4@3,8Ghz 1,33V Real /full stable Prime95 an LinX
cooling AC Auras Wave
Last edited by memel; 02-23-2010 at 06:27 AM.
omg, u lucky "polák" :-D...I tested today my CPU, for 3.82GHz i need 1.372V. 1.33 is impressive
ROG Power PCs - Intel and AMD
CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread
I'm a noob at OC-ing a Phenom II and I'm trying to find a decent 24/7 OC for my new toy. So far:
NB/L3 is set to 2520MHz @1.35v, but looking at your results I think that the core voltage is little beat high. 1.525v causes instability in OCCT after 30 min. I have also added +0.1v to SB and NB voltages., CPU PLL is set to 2.62v.
I'm using air cooling - CM Hyper 212 Plus and I have a large server case with a decent cooling (3x120mm fans @1500rpm)
What voltages are safe for a 24/7 OC? (During OCCT, at the OC settings like those above, core temps are lower than 53'C.)
Last edited by gOJDO; 02-24-2010 at 12:19 PM.
I got my cpu happily at 955 C3 at 3.8 (cant get stable any higher) but the damn NB is useless. It doesnt want to do anything above 2400mhz. I tried 1.3V for 2600mhz even and that didnt work stable.
555 @X4@3,4Ghz ~1,17V; NB@2,6GHz 1,22V
Last edited by memel; 02-24-2010 at 11:27 AM.
tkxmoe, i suggest you start a new thread, somthing doesnt sound right there... except maybe not enough voltage. mine needs right around 1.3v for 2600mhz so some may need even more volts (think 1.35?) but if you make a new thread people can try to find out why its not getting stable. are you sure you adjusted cpu-nb volts, NOT regular nb volts? bla just make a new thread
memel, very nice chip there! is that the best of the 555s you had or just random?
LEO!!!! amd phenom II x6 1100T | gigabyte 990fxa-ud3 . . 2x2gb g.skill 2133c8 | 128gb g.skill falcon ssd sapphire ati 5850 | x-fi xtrememusic. . . samsung f4 2tb | samsung dvdrw . . corsair tx850w | windows 7 64-bit. ddc3.25 xspc restop | ek ltx | mc-tdx | BIP . . lycosa-g9-z2300 | 26" 1920x1200 lcd .
the best.
cooling AC
*NB 2,6Ghz 1,20V
Last edited by memel; 02-24-2010 at 11:44 AM.
Cooling=Water
Why single channel?
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
one stick
LEO!!!! amd phenom II x6 1100T | gigabyte 990fxa-ud3 . . 2x2gb g.skill 2133c8 | 128gb g.skill falcon ssd sapphire ati 5850 | x-fi xtrememusic. . . samsung f4 2tb | samsung dvdrw . . corsair tx850w | windows 7 64-bit. ddc3.25 xspc restop | ek ltx | mc-tdx | BIP . . lycosa-g9-z2300 | 26" 1920x1200 lcd .
Sure but why not 2?one stick
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
i just was playing around, so i only used 1 stick, i think it will make no difference?!
For SuperPi 1M, no. For 32M calculation it will make a big difference though.
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
Hi guys.....
PhenomII 965 C3 @ 4.635 @ Air Cooling.....(Valid)
core temps were about 12 and cpu cooler was PC COoler 1216-X ...
http://valid.canardpc.com/show_oc.php?id=983365
I will test it tonight for Stable Frq ....(maybe 4.2GHZ) for SuperPi
A lot of nice results in this thread. I haven't had AMD since NF4 but picked up a 550 C3 a couple of weeks ago. It's completely stable at 4100MHz with 8GB of ram. Really hard to beat that type of performance compared to cost.
Posting Permissions
Reply With Quote
Bookmarks