UnOfficial EVGA X58 Classified Owners Thread

[ReverendMaynard]

my team and i have some numbers to.



Anyone have problems to boot over 4500mhz under Dry ice? this one can't :S.

do you have the x-cool jumper in the right position? It's at the bottom of the ram slots, and it's key in booting cold.

Many high OC's are done with basic cards that aren't demanding on the rest of the system. Nice to see yours with a decent card.

Thanks dude. I was looking for a great base to get all of my benching and the board really made it easy. IOH voltages are key for those beat cards at high PCIE freq.

[Salamndar]

Dual Chip graphics card hates high PCI-E clocks !

[ReverendMaynard]

Dual Chip graphics card hates high PCI-E clocks !

that's where you adjust the IOH I/O and ICH vcore

[Salamndar]

that's where you adjust the IOH I/O and ICH vcore

True but still high PCI-E don\t coop with dual chip cards that good

[Dahaka]

do you have the x-cool jumper in the right position? It's at the bottom of the ram slots, and it's key in booting cold.



Thanks dude. I was looking for a great base to get all of my benching and the board really made it easy. IOH voltages are key for those beat cards at high PCIE freq.

Yep!, i move that jumper but this MB doesn't have an extra performance.

[ReverendMaynard]

Yep!, i move that jumper but this MB doesn't have an extra performance.

what temps are you trying to boot at? I can boot in at -68C every time on DICE.

I'm using the factory bios btw

[Dahaka]

what temps are you trying to boot at? I can boot in at -68C every time on DICE.

I'm using the factory bios btw

FUUUUU!!! jajaja LOL.

Maybe can be that, i'm using the lastest bios, i will try the factory bios and one or two older bios.

PD: like -60° on DICE.

[tatts]

I take it most of you are using a multimeter to read volts? I just did a quick test and Eleet is out by quite abit

Vcore: Eleet 1.31 / Everest 1.31 / multi 1.28

DDR: Eleet 1.68 / multi 1.65 (1.64 load)

VTT: Eleet 1.4 load. 1.37 idle / multi 1.3 load, 1.29 idle

IOH (NB): Eleet 1.18 / multi 1.15

CPU PLL: Eleet 1.8 / multi 1.79

QPI PLL: Eleet 1.15 / multi 1.13

Both ICH: multi & Eleet read the same