My ASUS P6T7 WS Supercomputer is here...

[Mydog]

Well it may be depend on the CPU I've got a 920 D0, I'll try with it and see what happends. Have you got yours to 4,6 GHz +? Whats your max BCLK? mine seems to be 223 with out fideling with the PCIe freq.

[KingOfsorroW]

Well it may be depend on the CPU I've got a 920 D0, I'll try with it and see what happends. Have you got yours to 4,6 GHz +? Whats your max BCLK? mine seems to be 223 with out fideling with the PCIe freq.

ha, thats what I'm doing right now - trying to define the max mhz I can squeeze out of it. (wonna join the 4.5ghz club too much) So far the maximum I could boot at is 214x21... And thats 4494mhz - not really 4500 so I only need 6mhz more. But, unfortunately, it won't load at 215 or anything above no matter what.
I will try to drop the multi and see what's the max bclk I can get.

Edit: bah, 215 is my bclk wall I guess. Even with the dropped multi it wont go above that number. Probably I need to make some additional changes in the bios not just the bclk/cpu multi/voltage combination, but I guess I'll try that some other time (aka never). 4.2ghz is plenty for anything you know

[Mydog]

ha, thats what I'm doing right now - trying to define the max mhz I can squeeze out of it. (wonna join the 4.5ghz club too much) So far the maximum I could boot at is 214x21... And thats 4494mhz - not really 4500 so I only need 6mhz more. But, unfortunately, it won't load at 215 or anything above no matter what.
I will try to drop the multi and see what's the max bclk I can get.

Edit: bah, 215 is my bclk wall I guess. Even with the dropped multi it wont go above that number. Probably I need to make some additional changes in the bios not just the bclk/cpu multi/voltage combination, but I guess I'll try that some other time (aka never). 4.2ghz is plenty for anything you know

You've tried to give som more V to IOH, IHC, PCI IOH and PCI IHC and of course turned of loadline cal? Because that whats did it for me and I pumped up the vtt quite a bit.

[KingOfsorroW]

You've tried to give som more V to IOH, IHC, PCI IOH and PCI IHC and of course turned of loadline cal? Because that whats did it for me and I pumped up the vtt quite a bit.

Thanks, mate, I'll try that.

[nightsharkski]

deems 215 is the BCLK wall for this board,too bad...any solution from asus with rectify the bios maybe can solve this problem?

[Mydog]

deems 215 is the BCLK wall for this board,too bad...any solution from asus with rectify the bios maybe can solve this problem?

It seems to bo diferent from board to board, I've got no problem booting with 223 BCLK but it's dead stop at 224. The strange thing at 223 bios it shows 221,3 in GPU-Z.