Watercooling by Malik

[Malik]

I'll tell you the loop configuration will be cruicial when a overvolted i7 920 hits 3,8GHz
Dye's are also a big nono - as we have seen numerous proofs on.

That said - you make some of the best hw pr0n around

Second time you are wrong. This set of loop has no problem with i7 @ 4.6ghz

I work 24/7 on 4.2Ghz and all stuff is cool.

You change fittings or not ??

I will change when i make new block on qpi.

[seba84_2005]

I'll tell you the loop configuration will be cruicial when a overvolted i7 920 hits 3,8GHz
Dye's are also a big nono - as we have seen numerous proofs on.

That said - you make some of the best hw pr0n around

Same loop, any questions?



Pump -> rad 2x120 -> rad 3x120 -> mof 1 -> mof 2 -> CPU -> NB/SB -> Ram -> GPU's

[shazza]

Beautiful, as always - the blue is definitely my favorite.

I wouldn't expect any issue with loop order, as both Malik and Seba have shown. Also - given the rate at which Malik changes his system, using Feser One won't be a problem either.

[syc]

The next step will be white Or black! It'd be very awesome

[Main]

Second time you are wrong. This set of loop has no problem with i7 @ 4.6ghz

I work 24/7 on 4.2Ghz and all stuff is cool.



I will change when i make new block on qpi.

opps sorry my friend meant 4,8 of course... I do 4,2 with the standard cooler with both 2,66 D0 and C0

But as I said before - your pr0n is beautiful

[Main]

Same loop, any questions?



Pump -> rad 2x120 -> rad 3x120 -> mof 1 -> mof 2 -> CPU -> NB/SB -> Ram -> GPU's

no question - I wouldn't watercool a 2,66 that does 4,2 with the standard aircooler - even a lot of C0's does that
Maybe ask yourself what your D0 would have done with the proper configured loop ??




As you might see I wrote wrong to Malik - I meant 4,8 off course

[martensch]

looks awesome malik!! i like the style...

is this tygon? 19/13? or Feser?

[shazza]

@Main - don't want to derail the thread from Malik's beautiful work, but don't know where you are coming from. There have been several studies that show loop order has minimal impact, but this is not the place to debate it.

[Main]

@Main - don't want to derail the thread from Malik's beautiful work, but don't know where you are coming from. There have been several studies that show loop order has minimal impact, but this is not the place to debate it.

no prob

[Malik]

Movie version: LINK

[Alexandr0s]

Movie version: LINK

I thought posting :banana::banana::banana::banana: on YouTube wasn´t allowed?

[shazbom]

Malik man. you got me thinking now. i have 2 x 295 with koolance blocks. i was thinking to use another 360 TFC radiator so i can split my loops in to 2 lines.

TFC Rad 360mm > Pump > CPU > Mosfits > North,South Bridge> TFC Rad 360> 295gtx > 295gtx> to Res

but now. i might change my mind.. just do what you did. i'm just worried that my 295gtx's at the end of the loop might get very hot.

[martensch]

hey malik, you don`t use your backplate cooler anymore... do you still need the block, or would you sell it? i really could need it!! in case you wan`t to sell it... please contact me!!

[Malik]

Malik man. you got me thinking now. i have 2 x 295 with koolance blocks. i was thinking to use another 360 TFC radiator so i can split my loops in to 2 lines.

TFC Rad 360mm > Pump > CPU > Mosfits > North,South Bridge> TFC Rad 360> 295gtx > 295gtx> to Res

but now. i might change my mind.. just do what you did. i'm just worried that my 295gtx's at the end of the loop might get very hot.

Chill, they will be fine

[martensch]

is that a no?

[seba84_2005]

no question - I wouldn't watercool a 2,66 that does 4,2 with the standard aircooler - even a lot of C0's does that
Maybe ask yourself what your D0 would have done with the proper configured loop ??
img...



As you might see I wrote wrong to Malik - I meant 4,8 off course

C0/C1 are cooler than D0, but D0 requires lower voltage to similar Mhz and C0/C1 does not reach the high clock. EOT

[Malik]

is that a no?

Write PM, MSN etc. - we can talk about this

Some news:

[marxviper]

Hi Malik

Thank you for posting your worklog. I really appreciate it especially when you used different components in your system, this gave me an idea for my first water cooled build. Now I know which components would go for my needs.

I have a favour to ask from you.

Could you please post temperatures for the different CPU blocks you used? I am stuck between enzotech with Led and ek supreme.

Thanks.

[Malik]

Any block from EK will be better than luna - that i can say. EK Supreme LT was about 3-4 degree better, EK Supreme HF ... the king of performance

So if you thinking about new block for cpu - check out EK

[marxviper]

Malik

luna's blue led looks so good. I wonder if I could do that for ek too.

Which brand motherboard block you like a lot?

[Malik]

Malik

luna's blue led looks so good. I wonder if I could do that for ek too.

Which brand motherboard block you like a lot?

Here you have EK with led:



If you want high performance and very good quality - EK is the best choice for now.

[.:R32]

Man your photos are awesome!

[Edward88]

But the supreme LT dont perform so well . . .

Really nice malik!

[TadZilla]

This ongoing log of your work has been the biggest inspiration to me since I decided to watercool my project a few months ago. Your photos are amazing! The fact that you run all of this on one DDC is blows my mind. I'm hoping for two things with my project:

1. The rads I have are enough to cool everything
and
2. My build turns out even remotely close to 1/16 the quality and cleanliness of your build

Can't wait to see more!

-TadZilla

[Malik]

Thanks for big words about my project's

All the time i'm thinking... with or without ram block:



For me ... something is not ok.

What's your opinion ?