MMM
Results 1 to 25 of 2507

Thread: **Gigabyte GA-X58A-UD7 OC-Tips-Bios-Discussion Thread**

Hybrid View

  1. #1
    Xtreme Member
    Join Date
    Sep 2009
    Posts
    192
    What do you guys use for quick stability testing?

    Right now I'm doing 2 passes Linx and 4 minutes of OCCT... is this sufficient to see if a certain voltage is good?

    I'm possibly running "stable" right now 211x19 4ghz with 1.2v vcore / 1.2v vtt / 1.2v ich and ioh / 1.14v qpi pll.

    What do you guys think? What's your method for quick stability testing? I mainly use the 2 passes Linx and 4 minutes OCCT to see around where I should I tweak for a serious 24/7 OC.

  2. #2
    Xtreme Mentor
    Join Date
    Jan 2009
    Location
    Oslo - Norway
    Posts
    2,879
    Stability for you own 24/7 use would depend on how demanding application you use.
    But Primestable is a term, that the good old school OCing has been referring to minimum 8 hours of Prime stability.
    Other stability tests are somehow new and unclear, but 1 hour OCCT, and 20 pass LinX have been used widely.

    ---------------------------
    I have been playing with the 24/7 stability on x21 multi, and BCLK216 seams to be a major jump, at least for my CPU.

    My CPU (which i really know it's normal behavior), acts like it has enough Vcore for 21x216, but adding other voltages won't stabilize the system.
    Adding Vcore (within the expectations) doesn't help either. It seams to need much more Vcore from this point, but acts like it is missing something else.


    I experienced the same behavior from BCLK226 with x19 multi too. I tried to get it stable @4.31GHZ (227x19), but never could stabilize it for 24/7, and couldn't figure what was wrong.

    Both runs SuprPi32M and more .., feels fine and stable for light load, but gives BSOD 30 sec. into prime, LinX, or OCCT.

    I think the MB plays a role in this behavior too, because the same CPU (and RAM) have been showing the same behavior on my good old DFI UT too, but on other BCLKS. I remember it was showing similar behavior when i was trying 19x216 (if i remember right). I never tried over 210x21 on that MB, and can't say much abut x21 behavior.

    These BCLKs may change with new BIOSes too, I guess. I suspect some tweak on the MB would affects these BCLKs too, but I don't know what on this MB, yet.
    Last edited by Sam_oslo; 01-14-2010 at 12:30 PM.

    ASUS P8P67 Deluxe (BIOS 1305)
    2600K @4.5GHz 1.27v , 1 hour Prime
    Silver Arrow , push/pull
    2x2GB Crucial 1066MHz CL7 ECC @1600MHz CL9 1.51v
    GTX560 GB OC @910/2400 0.987v
    Crucial C300 v006 64GB OS-disk + F3 1TB + 400MB RAMDisk
    CM Storm Scout + Corsair HX 1000W
    +
    EVGA SR-2 , A50
    2 x Xeon X5650 @3.86GHz(203x19) 1.20v
    Megahalem + Silver Arrow , push/pull
    3x2GB Corsair XMS3 1600 CL7 + 3x4GB G.SKILL Trident 1600 CL7 = 18GB @1624 7-8-7-20 1.65v
    XFX GTX 295 @650/1200/1402
    Crucial C300 v006 64GB OS-disk + F3 1TB + 2GB RAMDisk
    SilverStone Fortress FT01 + Corsair AX 1200W

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •