After running with DFI for a while I thought I would give the NF7-S a go what with all these new mods popping up

I have done the Vdimm mod as shown in the motherboard faq article . I also did the vdd and vbt as shown by tictac here :http://www.xtremesystems.org/forums/...5&pagenumber=6

My voltages are 2.06v Vcore , 1.7v VDD/AGP and 3.3v Vdimm .

Running 240x11.5 more stable than I have ever had an NF7-S board

I am also using a mobile 2400+ with the L12 mod .

This score is with APIC off :http://service.futuremark.com/compare?2k1=7734977

With APIC on the score would be over 22000 easy But it just wont run at these speeds with APIC on

Before the vdd boost and vbt mod I was never stable over 225 fsb on the same board ( even with the vdimm mod I did first )

For some reason I cant go much higher because I have a board that likes 1.5v vdd for more fsb and that voltage wont be enough for the vbt on the ram . Sort of a catch 22 situation there

Tictac great work man I would like to know if the vbt mod could in any way be derived from the AGP voltage ? It would help alot if it could .

Keep up the good work guys . Its good to be back on the NF7-S scene instead of the DFI boards . I just love that I can power up my PC and it boots first time and everytime
Cheers

PS : This is the first time I can run a high fsb/vcore on the NF7-S