just picked up the little brother to this board, the UD4. Very nice so far, and for the record, Mushkin Redline Ascent 12800 CAS6 works perfectly at 1.5v
just picked up the little brother to this board, the UD4. Very nice so far, and for the record, Mushkin Redline Ascent 12800 CAS6 works perfectly at 1.5v
GB 790XTA UD4
GSkill Pi Black 2000 Cas9
ASUS 4870
Enermax Revolution 1050+
http://www.heatware.com/eval.php?id=67661
Just a quick test........I was actually testing/loading an 850 watt PSU so this is most likely not max. It was preety much shoot from the hip quick settings that I knew would pass.......not bad for its first time out of the boxOriginally Posted by neo mike
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Ahhh so you have your hands on the new gig board, ok i wait to see what else you post.
MSI 790FX GD-70
965 BE C3
4Gigs Corsair GTS 2000 Cas 8
Noctua U12P Push Pull
I could always buy it and post some numbers. I just have less then great ram which i need to remedy quickly. The OCZ gold series could have been better IMO, but not bad for the price. What RAM you guys using again?
Edit: Looks good Chew*, Your Ram makes me ill.. lol
Last edited by charged3800z24; 12-16-2009 at 09:34 PM.
~1~
AMD Ryzen 9 3900X
GigaByte X570 AORUS LITE
Trident-Z 3200 CL14 16GB
AMD Radeon VII
~2~
AMD Ryzen ThreadRipper 2950x
Asus Prime X399-A
GSkill Flare-X 3200mhz, CAS14, 64GB
AMD RX 5700 XT
Im using Corsair GTS 2000 cas 8 4 gig, clocks pretty well, not sure what Chew is using im sure he has all kinds of memory, i only have 1 pair.
MSI 790FX GD-70
965 BE C3
4Gigs Corsair GTS 2000 Cas 8
Noctua U12P Push Pull
here is an optimized BIOS, suggest if you overclocking use this one
http://rapidshare.com/files/321952871/79XTAUD5.HC3.html
i use corsair 1600c6 with chew* optimized memory timings could fly
DDR3-1740 CL6-6-5-18-1T
well done , chew*
Chew: so, u can say, this board is better than older MA790FXT-UD5p?
ROG Power PCs - Intel and AMD
CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread
hey man, would you have a newer bios kicking around for the 790XTA-UD4?here is an optimized BIOS, suggest if you overclocking use this one
http://rapidshare.com/files/321952871/79XTAUD5.HC3.html
i use corsair 1600c6 with chew* optimized memory timings could fly
DDR3-1740 CL6-6-5-18-1T
well done , chew*
GB 790XTA UD4
GSkill Pi Black 2000 Cas9
ASUS 4870
Enermax Revolution 1050+
http://www.heatware.com/eval.php?id=67661
chew* , you forgot your white PCB version of 790FXTA-UD5?
It has many features I requested that could not be changed due to hardware limits with older board. One of those being finer voltage increments.
Yes and for a limted time only you can send your board to me for a Limited Edition White PCB 790FXTA
If all the slots were Blue on that board that would be just PURE SEX.
I will put this board through its paces shortly for you guys in another thread in the near future.
ATM I am hammering out some more memory on AMD.
Last edited by chew*; 12-17-2009 at 07:00 AM.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
LOL i just flashed to this bios it's called HC3 hicookiehere is an optimized BIOS, suggest if you overclocking use this one
http://rapidshare.com/files/321952871/79XTAUD5.HC3.html
i use corsair 1600c6 with chew* optimized memory timings could fly
DDR3-1740 CL6-6-5-18-1T
well done , chew*
well i just ordered this board, can anyone tell me if i made a good choice lol
Seems solid and I am working on whatever bugs I can find atm......already found a couple. Testing alot of ram on it atm. GSKILL ECO's first.well i just ordered this board, can anyone tell me if i made a good choice lol
Refuse to boot with 1600 divider however 1333 divider works fine all the way up to 1700 7-8-7 prime 95 stable so far.
Last edited by chew*; 12-21-2009 at 04:26 PM.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Just grabbed one of these too. http://valid.canardpc.com/show_oc.php?id=900672 got that with a megahalem.
Hey does this board have some kinda cold bug? I can change bios's and it seems to get lower temps from which I can boot and work from. Seems like the F2 doesn't want to post after -70c and freezes up in windows. The F1 bios seems to be good to around -110c on my k-probe. =o\ Any insights?
The modded bios from hicookie is there some one ho has it because it is not in the link anymore i am getting the board tomorrow
The man with the littel Barebone!
And proud Crew of!!!
Octeamdenmark.com
Shuttle SX38P2Pro Barebone E8600cpu and HD4870X2 gfx and 2gig Crusial Ballistix PC8500 Cl5 and 2x150gig Raptor in raid 0 and 1x750 gig seagate
Msi 790FX-GD70 Mobo Amd 955-965 PHII cpus and 2gig Crucial value PC10600@800mhz 7-5-5-15 1T
And 4x500GB Seagate 7200.12 in raid0
4xHD5770 in CFQ.
[SIGPIC][/SIGPIC]
that bios was not very good for me
i ended up reverting back to F2 and found better speed Riska and matched the current W.R. in 1M SuperPi with lower CPU clocks
Ok thanks man great news i am going to bench ln2 on it i the weekend and have a 965C3 week 44 and a 965C2 week 32 and they both do 6300mhz+ 3d on my Msi 790FX-GD70 so i will hope this board will do better
The man with the littel Barebone!
And proud Crew of!!!
Octeamdenmark.com
Shuttle SX38P2Pro Barebone E8600cpu and HD4870X2 gfx and 2gig Crusial Ballistix PC8500 Cl5 and 2x150gig Raptor in raid 0 and 1x750 gig seagate
Msi 790FX-GD70 Mobo Amd 955-965 PHII cpus and 2gig Crucial value PC10600@800mhz 7-5-5-15 1T
And 4x500GB Seagate 7200.12 in raid0
4xHD5770 in CFQ.
[SIGPIC][/SIGPIC]
the new ud4 along with 965BE was on sale for $200 at Fry's Electronics on Christmas day.
Intel® Core™ i7 920@200x21=4.2Ghz w/1.312v HT on
Asus P6TD Deluxe
H2O by Petra's Tech CoolKit Elite Rev.2 w/D-TEK FuZion V2
EVGA GTX 580
OCZ3P1600LV6GK 7-7-7-24-1T 6GB
OCZ Vertex 2 50Gb in Raid-0
Super Talent UltraDriveGX 128Gb
WD VelociRaptor 300
Corsair HX850W
Windows 7 Professional 64
AMD Phenom™ II X6 1090T BE @ 4131Mhz(243x17)
Asus Crosshair IV Formula
AMD Overdrive doesn't appear to work with the F2 or hicookie bios.
Well Hopefully Gigabyte rectifies this problem with a New improved Bios update cause I just got My motherboard Today.
work for me
=o( wth...work for me
I'm using 3.1 too.
um I purchased this Board with the understanding of this being Gigabytes Top of the Line enthusiast AMD3 board. IS there going to be Proper Strong Bios support here. I mean I do understand this Board is less than 2 months OLD and so bugs need to be worked out etc.. My last 2 boards were high end MSI's and that company always had updated Bios.
whats wrong with the bios?
I'm using f2 off the site and it's solid.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Posting Permissions
Reply With Quote
Bookmarks