XS HWBot Team

[thijs]

Putting the X58A-UD7 under my SS tomorrow, hopefully ill be getting some nice bclocks! i need every single one i can get

[Don_Dan]

Putting the X58A-UD7 under my SS tomorrow, hopefully ill be getting some nice bclocks! i need every single one i can get

So how's it going?


Massman has posted an article about the new features in rev 3.0 of hwbot. Read it here!

Bench hard my XS brothers!

[Hondacity]

are we on rev3 now?

[Don_Dan]

are we on rev3 now?

No, not yet, it will be released in a week I think.

Most important change is that WPrime and PCMark will be divided into ranking per cores of the CPU, so if you have a fast dual core, push it through those benchmarks. Scores that were beaten by slow quads will rise higher in the rankings now.

Same is true for GPUs, if you have three cards you should bench them in 1, 2 and 3 card config, you can get hardware points for every result!
Single card runs will be very valuable, I will be working on 01 during the holidays, that's the only benchmark where Core 2 is still king of the hill! ^^

I wonder what our team's score will look like after the transition to rev 3.

[thijs]

Tried a bit under the singlestage, this seems to be the highest bclock you can archive with this motherboard, another used reported the same wall @ 238, not sure how or why it's so precise, they should be able to fix that

anyway, pic:



237 is not bad, that's 5451 mhz on 23x multi, roughly the max my cpu will do 32M i think. cpu-z / 1M can go quite higher then that, but o well, perhaps a newer bios can fix a few things.
so far im pleased with the results i archieved, it's a keeper

[chew*]

Try raising PCI to 120 mhz then try blck again.

[thijs]

Tried up untill 120mhz pci-e , nothing worked, i suppose i could try a bit higher still, but if i dont get any gains from about 108, i doubt it'll just work all of the sudden.

[Linuxfan]

Tried up untill 120mhz pci-e , nothing worked, i suppose i could try a bit higher still, but if i dont get any gains from about 108, i doubt it'll just work all of the sudden.

Get an i7 960 with a higher multi?
Nice bclk with that board, doesn't look bad at all!

[thijs]

Well, if i find something better it's alright obviously, but atleast i can easily get the max out of the cpu with 3D, and 32M @ almost 5,5ghz isnt to bad either. so you wont hear me complaining,
just odd everyone has the exact same wall it seems regarding bclock

[Don_Dan]

Kingpin is on fire, he managed to get almost all HD 5870 single card records yesterday, now he should have most single GPU records on hwbot. Looks like Team PURE is preparing for rev 3.0...

I'm still waiting for the test server, this will be very interesting.

[[XC] gomeler]

We get murdered in team and personal points, so we began preparing. We'll come out dropped a few places but should be back to normal towards February. Rev 3 is throwing a monkey wrench into our typical strategy.

[chew*]

Cool looks like I can finally focus on single card and ln2 runs.

[Hondacity]

i'm betting kingpin has a 5870 @ 1400 backup

i think what other teams have are the sheer numbers...
limited number of members will surely put down the points..

we should recruit more guys lots have 5xxx series cards

[Linuxfan]

Thanks a lot for help Don_Dan and Jor3lBR! I managed to beat the 1st place time in Wprime 32M and 1024M with the T5270.

[Jor3lBR]

Thanks a lot for help Don_Dan and Jor3lBR! I managed to beat the 1st place time in Wprime 32M and 1024M with the T5270.

Nice one Linux glad to help out.

I'm still waiting on some hardware to finish quad core benching, I can't wait to start on this Rampage above 6Ghz

[Don_Dan]

Thanks a lot for help Don_Dan and Jor3lBR! I managed to beat the 1st place time in Wprime 32M and 1024M with the T5270.

Good work, I'm glad I could help!

we should recruit more guys lots have 5xxx series cards

I already know someone we could ask!

Edit: Ron a.k.a. runmc joined us today!

[Linuxfan]

Edit: Ron a.k.a. runmc joined us today!

Great! Looks like he has some nice hardware and cooling to do some damage!

[Jor3lBR]

Edit: Ron a.k.a. runmc joined us today!

Sweet I love his single stage builds! Maybe someday I could get a cascade bencher with XS Team discount

Welcome aboard runmc!

[Jor3lBR]

Did some more Quad Core damage today to get us back to 8k points.

I loved this cpu especially for the PCMArk05 run, if I optimize this thing I can break 29k:

http://hwbot.org/hardware/processor/...ll%20of%20fame

[Hondacity]

you beat coolaler!!! hahahahahah




was the nb watercooled?

[Jor3lBR]

you beat coolaler!!! hahahahahah




was the nb watercooled?

Hey Honda thanks

Nope; all on air but the cpu.

Almost at stock volts. Only raised the vcore to 1.58 to get the SS.

It was my first run with it just to get the ref's down. All those scores can be improved

[NapalmV5]

congrats jor

come on 30k

[Linuxfan]

Did some more Quad Core damage today to get us back to 8k points.

I loved this cpu especially for the PCMArk05 run, if I optimize this thing I can break 29k:

http://hwbot.org/hardware/processor/...ll%20of%20fame

Congrats man, those are some very nice runs! That PCMark score is outstanding!
8100 points with the current Hwbot revision here we are!
Wonder whats going to happen with the new revision though...

Edit: I'm in for a Gig X58A-UD7 board... wish me good clocks with it!

[Hondacity]

NapalmV5 is in the thread! woooo

bench for team.xs

linuxman

goodluck with the gigabyte..they definite did a good job with the p55 udx..not sure with the ud7 though...

[Don_Dan]

Did some more Quad Core damage today to get us back to 8k points.

I loved this cpu especially for the PCMArk05 run, if I optimize this thing I can break 29k:

Really great work, you have shown some strong scores lately!

congrats jor

come on 30k

Nice to see you in this thread, you know you're always welcome to join us.

Wonder whats going to happen with the new revision though...

~ 10500 points...

We'll still be ranked 12th though, PC Games Hardware will drop down, but i4memory will be slightly ahead of us. We might be able to get them with a decent push...




By the way, why is JMAX at 9k now?!
Well, doesn't matter anyway....