Micron D9 GMH\GKX\JKH etc club

[User111]

pity for my chip, not the best. To go back often takes several volts http://valid.canardpc.com/show_oc.php?id=878719 2.72v..

[JULO]

@ User111

try 2:3 multiplier
Me teams have increasment about 5mhz @ CAS3 comparing to 1:1 or 4:5

[User111]

5MHz to do nothing more, I am already so great a success like that, even if the absurd vDIMM. I tried to get them in CAS 4-4-4-12 but I could not break through the wall of 610MHz even with other overvolt
http://valid.canardpc.com/show_oc.php?id=880067

[JULO]

and KHX 1200 - D9GKX 6WD22
however, PCB is a no name :/ looks like a HJ-M1, but it's 6-layers

@ 2.44V (real) 900MHz 3-3-3-8

[User111]

yes 628Mhz some ideas to lower the voltage? I was advised to raise the northbridge voltage from 1.24 to 1.40 (well above the specifications of Intel talking up to 1.25V to P45)

[JULO]

http://valid.canardpc.com/show_oc.php?id=886562

Kingston HyperX 1200MHz @ D9GKX 6WD22
513MHz @ 3-3-3-8 @ 3.05V

[Don_Dan]

yes 628Mhz some ideas to lower the voltage? I was advised to raise the northbridge voltage from 1.24 to 1.40 (well above the specifications of Intel talking up to 1.25V to P45)

I've used up to 1.50V on P45 if I recall correctly, didn't do any harm from what I can tell but I wasn't feeling comfortable with it at all....

http://valid.canardpc.com/show_oc.php?id=886562

Kingston HyperX 1200MHz @ D9GKX 6WD22
513MHz @ 3-3-3-8 @ 3.05V

Don't kill them!

[JULO]

I have low budget and I have to choose beetween
1 gig of this HyperX and a
2x1GB kit of Cellshock 1000 CAS4 straight from RMA

I'm thinking about this for 2 day and still can't decide
what would you choose?

[aslanwas]

nice results first, with 3Volts, they were warmed up i wouls choose the cellshocks, they clock really really goo, especially with low latencies, i have one 1000 cl5 GKX kit, and they did 1200 C4 2,6V 32m stable

[JULO]

thanx

mine CAS5 1000 achieved very similiar results
However, this KHX does 1200 @ 4-4-4-12 @ 2.42V DOS memtest stable

[d50man]

my last crucial 2x1gb ballistix did cas4 1000 2.25v for 6months then on a hot day they took a huge dump now i have single sided crap again

[User111]

http://valid.canardpc.com/show_oc.php?id=886562

Kingston HyperX 1200MHz @ D9GKX 6WD22
513MHz @ 3-3-3-8 @ 3.05V

You are a fool

[User111]

That's what I managed to do between yesterday night and this afternoon 1300MHz 5-5-5-15 2.28v stable http://img43.imageshack.us/img43/329/130055515.jpg
vDIMM not the least, so I can still get

[CpmF]

Always my Dominator PC9136 D9GMH's and P5N-E

410Mhz 3/3/3/9 @2.51v bios



I have seen a beautiful 425Mhz-11300 Mb/s but it was above capacities of my P5N

Also 661Mhz 5/5/5/15 @2.42v bios :

[aslanwas]

@Cpmf

621mhz @ 4-3-3 2,42V sounded a lot better

[chad]

I just bought several D9 kits off of ebay.

Kingston HyperX PC2-9600 D9GKX 2X1GB $64.00
Buffalo Firestix PC2-8000 D9GKX 2x1 512mb $26.00
G.Skill HZ Series PC2-6400 D9GMH 2x1GB $32.00
Corsair Dominators PC2-8888 D9GMH 2x1GB $49.00
Crucial Ballistix PC2-8000 D9GMH 2x1GB $37.00


I am snowed in the "Blizzard of 2009" in the Northeast. Should be some fun testing.

[aslanwas]

I just bought several D9 kits off of ebay.

Kingston HyperX PC2-9600 D9GKX 2X1GB $64.00
Buffalo Firestix PC2-8000 D9GKX 2x1 512mb $26.00
G.Skill HZ Series PC2-6400 D9GMH 2x1GB $32.00
Corsair Dominators PC2-8888 D9GMH 2x1GB $49.00
Crucial Ballistix PC2-8000 D9GMH 2x1GB $37.00


I am snowed in the "Blizzard of 2009" in the Northeast. Should be some fun testing.

Corsair Dominator 8888 foor only 49$

if you want to sale them please pm me

[franklin5252]

The Cell Shock memory is some Good stuff i have a friend that has some.

[JULO]

@chad

which stepping is your KHX?
mine 6WD22 is a really good piece of die ;D

and try to push up ballistix

[WaterFlex]

CpmF
Very nice job

[Shiranui Gen-An]

Everytime I see that someone got a good deal on a Corsair 8888C4DF kit, and I get jealous, I have to remind myself that I have a rather neglected Geil DDR2-1160 C4 kit

[aslanwas]

hey shiranui, what abou t yoour team xtreem 1300 kit ? any results there ?

[Shiranui Gen-An]

The Team 1300 kit is crap. One of the sticks is clearly degraded.

[RAMMAN]

i too got a team xtreem 1300 kit from foxkitos. i havent been pushing them much voltage wise but so far best results are 1110 4-4-4-12 2.3v, 1066 4-4-4-12 2.2v, 1280 5-5-5-15 2.35v, 1170 5-5-5-15 2.2v more info here:

http://www.xtremesystems.org/forums/...d.php?t=241364

[CpmF]

Cas3 & 2.51v bios



Seems to be nice