Originally Posted by Gaul
I got cha I changed that around now to 100 MHZ. I backed it down to 3935GHz for now but here some LinX from 4131Ghz temeplate for 4131Ghz whe.I had it up there for a week running smooth
Code:MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ..................: Auto CPU Clock Ratio ..........................: 8 Fine CPU Clock Ratio......................: +0.5 CPU Frequency ............................: 4.13Ghz (486x8.5) Clock Chip Control Standard Clock Control CPU Host Clock Control....................: [Enabled] CPU Host Frequency (Mhz) .................: 486 PCI Express Frequency (Mhz) ..............: 100 C.I.A. 2..................................: [Disabled] Advanced Clock Control CPU Clock Drive...........................: 1000mV PCI Express Clock Drive...................: 1000mV CPU Clock Skew (ps).......................: 0ps MCH Clock Skew (ps).......................:50ps DRAM Performance Control Performance Enhance......................: Standard MCH Frequency Latch......................: Auto System Memory Multiplier ................: 2.00D Memory Frequency (Mhz) ..................: 972 DRAM Timing Selectable ..................: Manual Standard Timing Control CAS Latency Time.........................: 5 tRCD ....................................: 5 tRP......................................: 5 tRAS.....................................: 18 Advanced Timing Control [Press Enter] tRRD.....................................: 4 tWTR.....................................: 4 tWR......................................: 6 tRFC.....................................: 62 tRTP.....................................: 4 Command Rate (CMD) ......................: 2T Channel A Channel A Timings Settings Static tRead Value......................: 9 Channel B Channel B Timings Settings Static tRead Value......................: 9 Motherboard Voltage Control Load-Line Calibration.....................: Enabled CPU Vcore...............1.22500V..........: 1.343v CPU Termination.........1.200V............: 1.300V CPU PLL.................1.500V............: 1.450v CPU Reference...........0.760V............: 0.830 MCH/ICH MCH Core................1.100V............: 1.300v MCH Reference...........0.760V............: 0.800v MCH/DRAM Reference......0.900V............: 0.900v ICH I/O.................1.500V............: 1.450v ICH Core................1.100V............: 1.300v DRAM DRAM Voltage............1.800V............: 2.1v DRAM Termination........0.900V............: 0.770V Channel A Address Vref..0.900V............:Auto Channel B Address Vref..0.900V............:Auto Advanced Settings Limit CPUID Max. to 3.....................: Disabled No-Execute Memory Protect.................: Enabled CPU Enhanced Halt (C1E)...................: Disabled C2/C2E State Support......................: Disabled x C4/C4E State Support....................: Disabled CPU Thermal Monitor 2(TM2) ...............: Enabled CPU EIST Function.........................: Disabled Virtualization Technology.................: Disabled __________________
Reply With Quote
I'll edit my post. 3.75 ofcourse were did that come from??? Wishful thinking maybe?
Bookmarks