Results 1 to 25 of 25

Thread: i3 initial results.....got bclk?

  1. #1
    -_-
    Join Date
    Sep 2006
    Location
    ATLanta, Ga.
    Posts
    516

    i3 initial results.....got bclk?

    Spent some time tonight playing around with a i3 Clarkdale and was mostly interested in what kind of bclk I could attain with it......

    i3 CB @ -160 (runs done at -130~-133)VTT@1.56v
    MaximusIIIFormula
    Corsair GT Cas7 PC16000 2x2GB
    ASUS 5870 x3
    Ultra x3 1600/Corsair HX1000
    Otti pot
    Thanks to ASUS for the support

    Don't laugh at the memory as it was all it would run or scores but I was pretty impressed by the blck it was running at. Yeah three cards were overkill for the setup but ask me if I care

    first some runs at x19

    This CPU loves vcore, that is for sure







    now to crank the vcore a little and try it again at x21



    looks as if GT3 bugged low......






    ran Vantage but I somehow forgot to save the screenshot....

    and here is the max bclk......yup only that much higher



    Thanks for looking
    Quote Originally Posted by Gautam View Post
    I'll add my name to this elpida graveyard as soon I even think about running 32M. (yes, the thought is enough)



  2. #2
    ODOC
    Join Date
    Aug 2006
    Location
    Copenhagen - Denmark
    Posts
    2,189
    wicked stuff, i3 seems to be alot of fun if you need to get kicking around with other than GTs or for people running on budget

    thanks for posting

    keep pushing it

  3. #3
    Diablo 3! Who's Excited?
    Join Date
    May 2005
    Location
    Boulder, Colorado
    Posts
    9,412
    Need a higher multiplier Looking good though on that bclk, now just wait for the 25x multiplier and you are kicking at 6GHz+.

  4. #4
    3D Team Captain Don_Dan's Avatar
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,199
    Nice runs, and you're using a pot by Otterauge too!

    Did you run some PI too?

    Be careful with the Vcore though, I know a guy who killed his Clarkdale at 2V.

    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

  5. #5
    uncore challenged...
    Join Date
    Feb 2006
    Location
    ontari-ho (canada)
    Posts
    1,654
    Quote Originally Posted by Don_Dan View Post
    Did you run some PI too?
    killed it...or simply put it out of its misery like a wounded animal?
    i don't quote in my signature, but best WR ever...
    Quote Originally Posted by Jor3lBR View Post
    It holds the current WR for the least vcore required to run 4500Mhz stable (1.32vcore)
    i can't even make that shyt up ^^^

  6. #6
    Xtreme Member
    Join Date
    Mar 2009
    Location
    Slovakia
    Posts
    159
    nice BCLK
    sorry for my bad english
    Team Inkognito is ready for overclocking!

  7. #7
    Xtreme Member
    Join Date
    Jul 2008
    Location
    Czech Republic
    Posts
    290
    wow, impressive BCLKgreat results Brian

  8. #8
    World Champion - IRONMODS
    Join Date
    Sep 2007
    Location
    Northern Japan
    Posts
    2,029
    Nice Brian...I asked my contact for i3...

    It is very hard to get a i3 CPU at this time, Intel is strictly control their product information at this time. Any information about Clarkdale CPU cannot be released before NDA date(7. Jan).
    Quote Originally Posted by Massman
    My definition of 'efficient' is 'it does not suck monkeyballs'. Yes, I set bars low.
    [CENTER]The post counter is not an intelligence meter!

    MAX11L - "It's like a console...with the suck turned down and the awesome turned up" -tet5uo
    Heat Team IRONMODS

  9. #9
    Xtreme Mentor
    Join Date
    Jul 2008
    Location
    Shimla , India
    Posts
    2,631
    I have one but no mobo to run it on searching for a H55/57 "wannna test the gma also"...

    The tests look great but not as good as i had hoped for but with time i am sure 6+ OCs will be done soon.
    Last edited by ajaidev; 12-19-2009 at 02:04 AM.
    Coming Soon

  10. #10
    xtreme energy
    Join Date
    Oct 2004
    Location
    Europe, Latvia
    Posts
    4,145
    Yep, multi is a problem on these for xtreme benching.

    Quote Originally Posted by ajaidev View Post
    I have one but no mobo to run it on searching for a H55/57 "wannna test the gma also"...
    I have plenty of BLKDH55TC available for around 90 euro But not i3
    Last edited by kiwi; 12-19-2009 at 04:49 AM.
    ...

  11. #11
    I am Xtreme
    Join Date
    Jan 2005
    Posts
    4,714
    That's quite a lot of vcore for that clock frequency. I suppose you needed to increase the vcore for higher BCLK results? Any thoughts on the scaling of bclk with added vcore?
    Where courage, motivation and ignorance meet, a persistent idiot awakens.

  12. #12
    Xtreme Member
    Join Date
    Jul 2009
    Location
    Germany _ Frankfurt
    Posts
    395
    congrats, nicee vcore as well
    www.vitesse24.de
    www.vitesse24.de


    C2Q q6600 3.3GHZ @ 1,184V
    4,5GHZ@ 1,52V ( 9* 500 )




    Corsair Dominator 10000 2gb, 8888 2gb, 9136 1gb

  13. #13
    Xtreme Addict
    Join Date
    Feb 2008
    Location
    Russia
    Posts
    1,910
    Clarks are beautiful mainstream chips

    Intel Q9650 @500x9MHz/1,3V
    Asus Maximus II Formula @Performance Level=7
    OCZ OCZ2B1200LV4GK 4x2GB @1200MHz/5-5-5-15/1,8V
    OCZ SSD Vertex 3 120Gb
    Seagate RAID0 2x ST1000DM003
    XFX HD7970 3GB @1111MHz
    Thermaltake Xaser VI BWS
    Seasonic Platinum SS-1000XP
    M-Audio Audiophile 192
    LG W2486L
    Liquid Cooling System :
    ThermoChill PA120.3 + Coolgate 4x120
    Swiftech Apogee XT, Swiftech MCW-NBMAX Northbridge
    Watercool HeatKiller GPU-X3 79X0 Ni-Bl + HeatKiller GPU Backplate 79X0
    Laing 12V DDC-1Plus with XSPC Laing DDC Reservoir Top
    3x Scythe S-FLEX "F", 4x Scythe Gentle Typhoon "15", Scythe Kaze Master Ace 5,25''

    Apple MacBook Pro 17` Early 2011:
    CPU: Sandy Bridge Intel Core i7 2720QM
    RAM: Crucial 2x4GB DDR3 1333
    SSD: Samsung 840 Pro 256 GB SSD
    HDD: ADATA Nobility NH13 1GB White
    OS: Mac OS X Mavericks

  14. #14
    Xtreme Addict
    Join Date
    May 2005
    Location
    POLAND/Cracow
    Posts
    1,246
    Quote Originally Posted by ajaidev View Post
    I have one but no mobo to run it on searching for a H55/57 "wannna test the gma also"...

    The tests look great but not as good as i had hoped for but with time i am sure 6+ OCs will be done soon.
    YES
    where is h55/57?

  15. #15
    Champion
    Join Date
    Jan 2007
    Location
    Romania, lab501.ro
    Posts
    1,707
    Got a few around here
    Weissbier - breakfast of champions



  16. #16
    Xtreme Member
    Join Date
    Feb 2008
    Location
    Luxembourg
    Posts
    219
    Hehe, you have BCLK but no CPU multi, i have CPU mutli but no BCLK ( http://valid.canardpc.com/show_oc.php?id=867462 )
    My i5 661 seemed to be wall around 210 BCLK, no matter the temperature/volts/mainboard or anything. Moreover, the behaviour was like a Lynnfield, which means -90/-100 CB and 1.55-1.6v, more was not good...

  17. #17
    Xtreme Member
    Join Date
    Dec 2007
    Location
    CR:IA
    Posts
    384
    7xx(MHz) ram?

    why not 11xx(Mhz)?

    won't it do it?
    PC-A04 | Z68MA-ED55 | 2500k | 2200+ XPG | 7970 | 180g 520 | 2x1t Black | X3 1000w

  18. #18
    -_-
    Join Date
    Sep 2006
    Location
    ATLanta, Ga.
    Posts
    516
    Quote Originally Posted by Don_Dan View Post
    Nice runs, and you're using a pot by Otterauge too!

    Did you run some PI too?

    Be careful with the Vcore though, I know a guy who killed his Clarkdale at 2V.
    after seeing that the BIOS would not allow any CAS changes(you could set it but it would not take)I figured that it would honestly be a waste of time atm but will probably give it a shot as there are a couple more variables that I did not get to test during the sessions and a couple more things I noticed that i need to try again to verify that it was indeed what was behind some of the success that I had with the scaling of this CPU.

    Been using an Otti pot for quite awhile, it is one godly pot
    Quote Originally Posted by ajaidev View Post
    I have one but no mobo to run it on searching for a H55/57 "wannna test the gma also"...

    The tests look great but not as good as i had hoped for but with time i am sure 6+ OCs will be done soon.
    already been done as I have been told by a friend. 6.7GHz 1M is at 6.5xx seconds. PP is atrocious due to memory limitations.(No, I have not seen screenshots but he is a little more than reliable )

    Quote Originally Posted by massman View Post
    That's quite a lot of vcore for that clock frequency. I suppose you needed to increase the vcore for higher BCLK results? Any thoughts on the scaling of bclk with added vcore?
    vcore scaling was not of importance in regards to bclk scaling as I could max out on the highest multi at the same bclk at 1.56v. The higher vcore was just to stabilize the CPU. The 1.8v was needed to pass Vantage and I just kept it there for the rest of tests.

    A combination of VTT and a certain something else was what I found to help scaling more than anything else....I need more proof before I say what it is to make sure it was not a fluke, not trying to hide anything

    Quote Originally Posted by Benji Tshi View Post
    Hehe, you have BCLK but no CPU multi, i have CPU mutli but no BCLK ( http://valid.canardpc.com/show_oc.php?id=867462 )
    My i5 661 seemed to be wall around 210 BCLK, no matter the temperature/volts/mainboard or anything. Moreover, the behaviour was like a Lynnfield, which means -90/-100 CB and 1.55-1.6v, more was not good...
    I can honestly say that this CPU was nothing like what I had previously encountered with Lynnfield although all my Lynnfield CPU's were duds

    Always appears hard to come across CPU's that have the best of both worlds

    Quote Originally Posted by ChinStrap View Post
    7xx(MHz) ram?

    why not 11xx(Mhz)?

    won't it do it?
    nope. From what I have seen so far they are locked in regards to memory....hopefully this is just an ES deal.

    Was weird staring at CAS 5 as it has been awhile
    Quote Originally Posted by Gautam View Post
    I'll add my name to this elpida graveyard as soon I even think about running 32M. (yes, the thought is enough)



  19. #19
    Xtreme Mentor
    Join Date
    Jul 2008
    Location
    Shimla , India
    Posts
    2,631
    And now i9 vs i5 aka i3 "Well because i have switched off HT"



    Not too shabby, also the RAM is locked BTW so cant OC it.... the HT is turned off because it was not very stable with it on it may have needed more Vcore but i did not have the balls to raise it over 1.5v



    Yep i9 totally r*pes the poor i3/i5 well everybody knew it would lol

    The good:

    Its a good chip i mean it will sell no doubt about it its like a half i7.
    Performance is good but does not fell as smooth as the i7 9xx.

    The bad:

    Needs vcore i am surprised how much vcore this eats, it eats even more vcore than the i5 750 i had "Which also ate a lot" but this is a 32nm chip dam
    After 1.5v you better have some gooood cooling, i mean good.

    The ugly:

    I want the H55/57 cant test the dam GMA without it.
    P55 had initial problems could not even boot with the thing in had to use a i5 750 to boot and then flash the mobo.
    Coming Soon

  20. #20
    Xtreme Member
    Join Date
    Dec 2009
    Posts
    100
    Nice overclock keep the updates coming in.

  21. #21
    Registered User
    Join Date
    Mar 2009
    Posts
    47
    I wonder what these chips can do 24/7 on air....
    Is this a recommendable upgade to anyone running a E8XXX above 4 Gigs?
    Somehow I have my doubts....
    SILVERSTONE FORTRESS
    CORSAIR HX 620
    Q9650 @4GHZ
    GIGABYTE UD3P
    8GB G.SKILL 8500 DDR2
    RADEON HD6950@6970
    INTEL POSTVILLE 80GB
    2X SAMSUNG 2000GB
    WD640GB
    WD160GB
    WD500GB
    APOGEE DUET

  22. #22
    Xtreme Member
    Join Date
    Jun 2009
    Location
    Ukraine, Dnepropetrovsk
    Posts
    381
    Nice, nice. I want to look more results

    Forgive for my English because I only learn it

  23. #23
    Xtreme Enthusiast
    Join Date
    Dec 2003
    Location
    Hong Kong
    Posts
    884
    Quote Originally Posted by Brian y. View Post
    Spent some time tonight playing around with a i3 Clarkdale and was mostly interested in what kind of bclk I could attain with it......

    i3 CB @ -160 (runs done at -130~-133)VTT@1.56v
    MaximusIIIFormula
    Corsair GT Cas7 PC16000 2x2GB
    ASUS 5870 x3
    Ultra x3 1600/Corsair HX1000
    Otti pot
    Thanks to ASUS for the support

    Don't laugh at the memory as it was all it would run or scores but I was pretty impressed by the blck it was running at. Yeah three cards were overkill for the setup but ask me if I care

    first some runs at x19

    This CPU loves vcore, that is for sure







    now to crank the vcore a little and try it again at x21



    looks as if GT3 bugged low......






    ran Vantage but I somehow forgot to save the screenshot....

    and here is the max bclk......yup only that much higher



    Thanks for looking




    Nice result, try Deluxe, I have tested it, bclk stronger than Maximus Formula III.

    Here is my 540 initial trial:


    Test Platform:

    CPU: Intel I3 540 3.06G
    MB: Asus SaberTooth P55
    RAM: Adata XPG 2200+ CL8 2GX2
    Display Card: Asus HD5970
    PSU: Antec Quattro 1200W OC Edition
    Cooling: LN2


    5.52G direct boot to win7 X64



    5.52G 3D03: 146699


    3D05 is very low, don't know is it bug-low or Ram freq limited....



    255X18 bclk


    Highest clock is 5565MHz @ 1.7V, waiting for cpuz web site, it is down now...

    SaberTooth only have 1.7V Vcore max, I need to go back to deluxe again...

    Last edited by TinTin; 12-21-2009 at 09:49 AM.
    CPU: XEON W3540 & Gulftown Q3FE
    MB: Asus Rampage III Extreme
    RAM: Corsair GT2000C7 2G X 3 ADATA XPG+ 2200+ 2G X 3
    SSD: Adata S596 120G
    Display Card: Asus EAH 5870
    WaterCooling:
    Laing D5 Pump + Koolance D5 Top
    Radiator: KP 120.3
    CPU Block: HeatKiller 3.0 + EK full MB Block
    PSU: Antec TPQ 1200W OC
    Case: SilverStone TJ-07BW


  24. #24
    Registered User
    Join Date
    Dec 2004
    Location
    Poland // Lublin
    Posts
    70
    Quote Originally Posted by Sebastione View Post
    I wonder what these chips can do 24/7 on air....
    Is this a recommendable upgade to anyone running a E8XXX above 4 Gigs?
    Somehow I have my doubts....
    Mine i5 661 do 4500MHz on somwhere between 1,4-1,45v

    It depends on price range. Nevertheless 170$ is a bit too much for this chip.

    I think lower memory divider will be typical for all Clarkdale chips. It's Intel's strategy to differ performance drop of dual core's with HT to real quad core i5 750.
    blue side of Power
    Mobo East OC Team

  25. #25
    Registered User
    Join Date
    Feb 2008
    Posts
    10
    hi all

    sorry to disturb your topic brian but i need help,i've got mIIIf and i test a core i3 540.but impossible to go over bclk 195..this chip seems to be a bomb,actually stable 4.5 at 1.32vcore:



    all multiplier don't pass 195,with vtt ,qpi,pch etc ...nothing do !!! this new cpu locked? or i do something wrong..?

    i have last bios m3f 2001..

    Brian,if my post disturb ,say me i will delete it.

    if someone can help me to exploit this chip...(ram gskill 17600 pi )

    Many thx !


    moky
    Last edited by moky33; 10-19-2010 at 11:32 PM.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •