Swiftech unveils MCR Drive Heat Exchangers

[gabe]

Just to clarify, dose it come with the pump or is that sold separately?

both

What's the MSRP for these?

Part # Description MSRP
MCR220-DRIVE-B Dual 120mm heat exchanger (bare, without pump), Black, including 1/2" & 3/8" fittings, and mounting screws $134.95

MCR220-DRIVE Dual 120mm heat exchanger with integrated pump, Black, including 1/2" & 3/8" fittings, and mounting screws $196.95

MCR320-DRIVE-B Triple 120mm heat exchanger (bare, without pump), Black, including 1/2" & 3/8" fittings, and mounting screws $147.95

MCR320-DRIVE Triple 120mm heat exchanger with integrated pump, Black, including 1/2" & 3/8" fittings, and mounting screws $209.95

dose this use the same weak design as the stock 35x or dose it have the improvements of the aftermarket tops

Improvements come from:
- considerably shortened and simplified flow path compared to a traditional 4-device loop (think of all the curves, elbows, tubing going from one device to another, etc..)
- 1/2 the number of fittings (4 instead of 8 in a CPU loop) - each fitting induces a measurable pressure drop.
- native ability to run the pump in 1/2" versus 3/8"

You know if it came with the bolt on box as well then it will be as easy as 1-2-3. Bolt on the back upright, slap a block on something and run 2 hoses. Fill and bleed...DONE!!!

this will be an upcoming kit. Stephen literally took less than 10 minutes to assemble the entire kit shown here: