MMM
Results 1 to 25 of 59

Thread: Antec 1200OC @ 1600+ watt (4x GPU)

Hybrid View

  1. #1
    Registered User
    Join Date
    Jul 2009
    Location
    Quebec
    Posts
    22
    Quote Originally Posted by sacha35 View Post
    That has nothing to do with what I asked...
    i7 960 @ 4.21GHz 1.341 V <> EVGA X58 SLI <> Kingston HyperX Genesis 6 x 2GB @ 1600MHz <> Crossfire Sapphire HD5870 @ 900/5000

    <> Razer AC-1 <> Corsair HX850 <> CM Storm Sniper <> Cogage Arrow Push, Pull/Push <>

  2. #2
    I am Xtreme
    Join Date
    Aug 2008
    Posts
    5,586
    Quote Originally Posted by Adhmuz View Post
    It would be nice to see if that Corsair HX1000 could do the same load that the Antec is doing, it may be labeled as a 1000 watt PSU but internally its identical to the Thermaltake Toughpower 1,500 W.

    The test looks more impressive than the numbers show, all that GPU and still within the limits of a single PSU.
    Quote Originally Posted by Adhmuz View Post
    That has nothing to do with what I asked...
    internally identical? oh yeah...sasha did review the hx1000 vs the antec on the 12v rail..the antec held 12v @ 11.96v while the hx1000's 12v was @ 11.76..

    this clearly shows the weakness of the hx1000..above 1000w..the 2 500w independent power supplies are kinda...trying hard already regulating the v1 and v2 rails...

    Testing with the Corsair HX 1000w and Intel Skulltrail proved quite difficult because I had used three GFX cards and as this Motherboard has two EPS 12v connectors this only left me one on the PSU as I had used all other spare ports, so had to do a make shift bodge job of joining the two EPS lines on the board first. So to start off with this would be asking a hell of a lot from the single EPS line of the Corsair unit. It dealt quite well considering though, as it provided me with a stable overclock of 4048MHz with three overclocked cards drawing a total system current of 1043Watts from the mains outlet of which 36.4Amps was coming from the EPS 12V lines. The Idle EPS 12V voltage was measured 12.06V sagging to around 11.76V under full load conditions (so a full load drop on the 12v line of 0.3v).
    also jonnyguru tested the hx1000...

    http://www.jonnyguru.com/modules.php...Story2&reid=89



  3. #3
    Moderator
    Join Date
    Nov 2006
    Posts
    2,609






    Classi + 920 4500 1.53V
    P55A-UD7 + 870 4500 1.61V
    4 X 5870 1000/1200 1.31
    + 260GTX + 1 X 5770 Default

    Stressed all vga's and cpu with Vantage and 06 and wprime, sandra
    never restart,shot down
    Great Work Antec
    Quote Originally Posted by LardArse View Post
    i think you are asking the wrong person about safety limits, but

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •