Post your C3 Test Results! (new title)

**feniksgod** · 12-14-2009, 11:50 AM

I canceled the cpu. My CPU now make 4Ghz and will make 4,1Ghz with air-cooling. I will search 4,3-4,4GHZ full stable on 965 C3 if anyone know what stepping CPU i will have to search. I would be very grateful.

**Zeus** · 12-14-2009, 11:58 AM

When you found it give me a call, i would like one too.

**Titan7171** · 12-14-2009, 12:03 PM

Originally Posted by feniksgod

I canceled the cpu. My CPU now make 4Ghz and will make 4,1Ghz with air-cooling. I will search 4,3-4,4GHZ full stable on 965 C3 if anyone know what stepping CPU i will have to search. I would be very grateful.

I dont think there are any that will do that yet

**feniksgod** · 12-14-2009, 12:16 PM

Originally Posted by Zeus

When you found it give me a call, i would like one too.

OK at least 4200Mhz, with what week i will get 4,2Ghz

In my country that I know only 10 cpu C3 has came

and the choise isn't very big

**Zeus** · 12-14-2009, 12:30 PM

It depends on what you're after mate, my cpu can do 4.2GHz pretty easy on 1.48V but it reboots after a few minutes of Prime blend.

I could use it for webbrowsing and email and stuff like that though. I decided to back down some and run it at 4.1GHz which is Prime blend stable at 1.46V.

**feniksgod** · 12-14-2009, 12:50 PM

I "remodel" DVD and Blu-Ray and because that 30minute prime blend is prefer for stable system

**FlanK3r** · 12-14-2009, 02:40 PM

sometimes newhere about my C3 AIR
idling at 4500MHz

**beta** · 12-14-2009, 03:52 PM

nice one FlanK3r

what was the cpu voltage?

**FireDragon** · 12-14-2009, 04:04 PM

CPU-z say 1.55, or do u mean what bios says?

Dragon

**beta** · 12-14-2009, 04:19 PM

nope, I mean cpu vddc in aod

**FlanK3r** · 12-14-2009, 10:47 PM

Originally Posted by beta

nice one FlanK3r

what was the cpu voltage?

real CPU vcore was really 1.55V (watch at my link in preview post, its more there-superpi, max validation, cinebench, wprime...)

**FlanK3r** · 12-15-2009, 08:52 AM

Cinebench x86 13 456points

3D mark 2006 with default clocks HD5770

And

superpi 1M under 16s, uff

15.859s

**sinar** · 12-15-2009, 10:54 AM

I got 0944FPMW here, will slap it with single stage. I hope it will clock good

Edit: Here we go

@ -12C in bios
ACC auto
Unleashed mode enabled

**sinar** · 12-16-2009, 01:19 PM

With a little bit more cold, 5Ghz+ and NB @3.5G is possible with this 0944FPMW

**Oliverda** · 12-16-2009, 01:56 PM

Originally Posted by sinar

With a little bit more cold, 5Ghz+ and NB @3.5G is possible with this 0944FPMW

Can you test it with air cooling?

**charged3800z24** · 12-16-2009, 06:51 PM

Well since I was not able to crossfire the 5770 and 5850, here is a single 5850 run at 4.3ghz

Phenom 965BE C3 4.3ghz/2400NB
8GB DDR3
5850 single 775/1100
Win 7 64bit
Cat 9.11

= Compare link =

**crazydiamond** · 12-16-2009, 06:57 PM

mind running it on win7 64bit with settings as close as you can get to these (comparing it to my 4870x2):

**FireDragon** · 12-16-2009, 07:00 PM

Nice one Charged!! my stock 06 run with my 5770 was 16,293 (memory at 1300 cas 9-9-9) as that it is what it set stock, just changed them to 1600 6-6-6 and did a burn in for my TIM, letting it set for a few atm, but ill have a few worthwhile posts in this thread here in a little bit lol

Dragon

**B-Shot** · 12-16-2009, 07:07 PM

A Dirty run with $2 silicone TIM and my 955 settings

**charged3800z24** · 12-16-2009, 07:16 PM

Originally Posted by FireDragon

Nice one Charged!! my stock 06 run with my 5770 was 16,293 (memory at 1300 cas 9-9-9) as that it is what it set stock, just changed them to 1600 6-6-6 and did a burn in for my TIM, letting it set for a few atm, but ill have a few worthwhile posts in this thread here in a little bit lol

Dragon

Looking forward to the post. Right now I am running a vantage run. i will try out afterburn to see if I can OC it more, not sure since 775 is CCC limit.

Edit: here is my Vantage run. These are not optimized results, I will try those later. I am in a hurry tonight lol.

= Compare Link =

4.3ghz 965BE C3 2400NB
5850 775/1100
Win 7 64bit

**Buckeye** · 12-16-2009, 08:46 PM

My first test runs with new kit of RAM, so still shaking this down.

**charged3800z24** · 12-16-2009, 09:25 PM

Originally Posted by crazydiamond

mind running it on win7 64bit with settings as close as you can get to these (comparing it to my 4870x2):

Hey Crazydiamond, were you asking me? I can if you want, I would just need to increase my NB and set the mem a lil lower. I was in Win 7 64bit on that run. If you were not asking me then safely ignore this post LOL

Originally Posted by Buckeye

My first test runs with new kit of RAM, so still shaking this down.

That was a nice run. What RAM you using there?

**crazydiamond** · 12-16-2009, 09:55 PM

Originally Posted by charged3800z24

Hey Crazydiamond, were you asking me? I can if you want, I would just need to increase my NB and set the mem a lil lower. I was in Win 7 64bit on that run. If you were not asking me then safely ignore this post LOL

ya i was asking you lol i was just curious because you had a pretty good score w/ lower nb and wanted to see how it did w/ same clocks. had some pretty cold air tonight, was trying for 4.4 but couldnt make it through the cpu tests

**Buckeye** · 12-16-2009, 10:13 PM

Originally Posted by charged3800z24

That was a nice run. What RAM you using there?

Thanks

Dominator GT 2000mhz 8-8-8 kit

**sinar** · 12-16-2009, 11:17 PM

Originally Posted by Oliverda

Can you test it with air cooling?

I will.

ACC disabled
Vcore @ 1.675 in bios
-9C idle cpu temp. in bios

This old single stage crying to uphold the load

Thread: Post your C3 Test Results! (new title)

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions