mine needs a bunch more juice when going from 4.0-4.2 using 20x.. like 1.42 cpu, 1.21-2 vtt.. temps hit 80-82.. these chips are toasters.. i can get 4.4 on the turbo using 21x at about the same volts...my cooling is pretty decent but it needs another radiator and maybe a better block.. this v2 runs warm on this 4core compared to cooling my e8500 at 1.49v cpu and nb at 1.51v which never went above 65-68..
8 years in use,, Shuttle an35n ultra, xp2500 @ 2.54, 2 x 512 g.skill, 2-3-2-5 @ 3 volts, sapphire x800 @ 525x510, e-power 520, cpu/nb on water.. SYSTEM II, Asus Maximus se, bios 1302, E8500 @4.5, 2 Hd4870's cf, Corsair tx850, 4x1 Crucial Ballistix @1141, 2x Raptor 74's. raid 0. cpu/nb on water..
-Intel 3770K,
-Gigabyte Z77 UD5H,
-Gigabyte GTX 680 SLI,
-16gb Corsair Vengeance,
-SSD 128gb Kingston, 2×1TB Samsung F3,
-Corsair 1000W
-Z-5500@XONAR HDAV 1.3 DELUXE
i saw that most of the people are pushing some crazy vtt on those chips, my gigabyte mobo goes purple after 1.21 vtt, is it safe pushing 1.3+ vtt?
CPU @ 4ghz / RAM @ 2000mhz
Vcore = 1.32V
IMC = 1.19V
PLL = 1.8V
VDimm = 1.61V
Idle Temps about 38 to 42
Load Temps about 64 (Prime95) and 72 (LinX)
Tested stability using Prime95 and LinX
Air Cooling...
HAF922 Chassis and Prolimatech MegaShadow HSF
First post here, so be gentle
I have the following setup:
i5 750 @ 3.8GHz 19X200
RAM @ 2000MHz
vcore @ 1.28v
vtt @ auto
Gigabyte P55A-UD4P
Cooling with Prolima Mega rev. B
My temps are:
Idle - 20c
Prime95 Load at 1 hour - 42c, but one core gets to 53c
A few questions for the experts:
1. Should I set vtt to something or leave it on auto if it's working?
2. Is Prime95 for 1 hour a decent load test or should I run longer before calling it stable?
3. I'd like to go for 4 or 4.2GHz, but I understand the diminishing returns factor. Any recommendations for how far I should try and what settings I should try at the higher speeds?
Many thanks!!
Posting Permissions
Reply With Quote
Bookmarks