Super Pi 32M Low Clock Challenge

**hipro5** · 12-09-2009, 04:53 PM

NOT "the good run" but it's "something" I think....
Low ram frequency and low Uncore.....
Next week that I'll have LN2 to freeze it, I'll be back...

EDIT: I forgot....... ENGLISH Windows XP....

3425.5..........hipro5.........9.59.375....17x201. 5.....1007.5mhz....6-7-5-18....2/10....X58

**Gautam** · 12-09-2009, 06:07 PM

I'm curious, what vdimm for that?

**3oh6** · 12-09-2009, 06:51 PM

damn George, you make us all look weak...but using a 975 is cheating

wouldn't mind knowing volts of the memory as well, killer stuff

**Hyperhorn** · 12-09-2009, 07:42 PM

Jody and George shoulder to shoulder, great...

*Updated from #88 to #112*

--> Thanks for all your results and special Thx to those, who try to help me and follow the scheme.

I will try to lower the arrear I had when I started this thread, so we can start into 2010 with a late breaking list.

**hipro5** · 12-09-2009, 10:43 PM

@ Hyperhorn: I edited my score adding "the scheme"......sorry.....

Volts on the dimms ehhh?.....To be honest, I was curious too...
....so I fed them with 1.9Volts...... FIRST time on these rams....
I used to work them with 1.743Volts and I said: "What the heck!".....

They can do 32M @ 1104MHz at 7-7-6-20-1T-60 at only 1.78Volts and 7-7-5-20-1T-55 at 1.81Volts...

P.S. I have BOUGHT these rams - they are NOT samples that were sent to me - just "regular pieces".....

**Zeus** · 12-09-2009, 11:21 PM

Hyperhorn, thanks for updating but i also had 11.xxx done at 3557MHz, see post #113.

I hope you can change this with the next update?

**Oldscarface** · 12-10-2009, 06:07 AM

Hyperhorn, could you also please update mine scores the next time.
post # 114 till post # 116.

**Gautam** · 12-10-2009, 07:33 AM

Originally Posted by hipro5

They can do 32M @ 1104MHz at 7-7-6-20-1T-60 at only 1.78Volts and 7-7-5-20-1T-55 at 1.81Volts...

P.S. I have BOUGHT these rams - they are NOT samples that were sent to me - just "regular pieces".....

Exactly like mine

But I refuse to go any higher than 1.76v

**George_o/c** · 12-10-2009, 08:42 AM

Originally Posted by Gautam

Exactly like mine

But I refuse to go any higher than 1.76v

Look at all the fun you miss Gautam

Feed them with more voltage asap

I know I'm asking from you to brake the rules you have, as far as high DDR3 voltage and SuperPi 32M are concerned

**dinos22** · 12-10-2009, 12:35 PM

after killing one of my 2200 sticks from these new batches i think Gautam is probably doing a smart thing heheh
i reckon i might do the same with the replacements........1.76v absolute max unless RAM under cold heh

**George_o/c** · 12-10-2009, 12:56 PM

Originally Posted by dinos22

after killing one of my 2200 sticks from these new batches i think Gautam is probably doing a smart thing heheh
i reckon i might do the same with the replacements........1.76v absolute max unless RAM under cold heh

How much voltage did you use dinos ?

**Gautam** · 12-10-2009, 01:02 PM

Originally Posted by George_o/c

Look at all the fun you miss Gautam

Feed them with more voltage asap

I know I'm asking from you to brake the rules you have, as far as high DDR3 voltage and SuperPi 32M are concerned

How about I just go for hipro's score with <1.75v?

**dinos22** · 12-10-2009, 01:32 PM

air mostly 1.8-1.85

it died at stock settings on MSI P55-GD80 so it most probably was the damn board that ate it but still

**hipro5** · 12-10-2009, 10:53 PM

Originally Posted by dinos22

after killing one of my 2200 sticks from these new batches i think Gautam is probably doing a smart thing heheh
i reckon i might do the same with the replacements........1.76v absolute max unless RAM under cold heh

From the new batches and it was killed?....

Are you trying to scare me now?....

Originally Posted by Gautam

How about I just go for hipro's score with <1.75v?

1.75V!.......:banana::banana::banana::banana::banana:yyyyyy........

**dinos22** · 12-10-2009, 11:02 PM

yeah new batch George

**kintaro** · 12-12-2009, 01:44 AM

3425.4......kintaro..........09.59.703....17x201.5 ....1007.5mhz.....6-7-5-18....2/10..X58

**cheapseats** · 12-12-2009, 10:44 AM

thanks for update Hyperhorn

Dino and kintaro, thanks guys

-----------

not for update

11.xx

10.xx

**cheapseats** · 12-12-2009, 10:47 AM

11.xx (45nm/i7)

2813.8......cheapseats.........11.59.921....13x217 ....1082mhz.....7-8-6-20....2/10..X58

XP sp2 / LSC on / core 1 affinity / realtime / explorer closed / 512-512 page file /
1 disk / 2 partition / maxmem 680 / SpiTweaker v1.0 CDT (680MB file) D>C (SPi C)

**cheapseats** · 12-12-2009, 10:48 AM

10.xx (45nm/i7)

3086.1......cheapseats.........10.59.546....14x221 ....1102mhz.....7-8-6-20....2/10..X58

XP sp2 / LSC on / core 1 affinity / realtime / explorer closed / 512-512 page file /
1 disk / 2 partition / maxmem 680 / SpiTweaker v1.0 CDT (680MB file) D>C (SPi C)