Im using F7
Im using F7
MSI 790FX GD-70
965 BE C3
4Gigs Corsair GTS 2000 Cas 8
Noctua U12P Push Pull
Lol, I just tried FSB again with F8C on +18C ambient.
First boot straight 262FSB: http://ceemic.pri.ee/amd/262fsb.JPG
And with higher NB: http://ceemic.pri.ee/amd/252fsb.JPG
2 days ago I tried my rig with LN2 and I couldn't pass 213FSB.
http://ceemic.pri.ee/amd/10.688.JPG
Vmods - what can possibly go wrong? ©
It can go higher than that ceemic
I can boot 300MHz HTT easily
250FSB is enough for me
That didn't help lot in today:
http://valid.canardpc.com/show_oc.php?id=867580
http://ceemic.pri.ee/amd/10.625.JPG
Max NB I could run 1M was ~4180MHz.
Vmods - what can possibly go wrong? ©
So i assume you like F8C bios
MSI 790FX GD-70
965 BE C3
4Gigs Corsair GTS 2000 Cas 8
Noctua U12P Push Pull
neo mike, seems better for me than F3L
Vmods - what can possibly go wrong? ©
6408mhz
nb 4539mhz (H)
superpi 1m time 10.610
sick nb speed :P more to come...
3x FX8150, 1250w Enermax, Fractal Desing , HD6870, Asus Crossahair V and some ln2 stuff
http://hwbot.org/submission/935260_s...be_10sec_300ms <- Lets try agen.
good job. We need new WR in x64 CInebench and in wprime (in wprime is the best HT/NB 2200/2200MHZ! )
ROG Power PCs - Intel and AMD
CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread
Wow 10.6 super pi is sweet.
Last edited by neo mike; 12-07-2009 at 07:28 PM.
MSI 790FX GD-70
965 BE C3
4Gigs Corsair GTS 2000 Cas 8
Noctua U12P Push Pull
Crazy stuff happening on Gigabyte 790FX-UD5P + G. Skill Ripjaws red 1600Mhz rated C9-9-9 24 1.5V
First of all, where did you guys noticed vmem droop on this mobo? Actually it overvoltage mine ram. Set 1.7V and u get 1.75V in DMM, 1.75 and I got an 1.81V!
About the RAM:
No way to get it stable working on Cas7 using 1333Mhz divider but what about Cas6 @ 1600Mhz when using 1066Mhz divider?
Even in this setting there is no way to match TRCD and TRP w/ the CAS there must be an 9 in TRCD to pass 1500Mhz, and unless an 7 for TRP.
Stability Gains can be observed when using higher voltage, anyway I only tested till 1.85V in bios wich actually gave me 1.90V (DMM). thats the only way to get it stable @1600Mhz 6-9-7. By the way I can use 1.75V and get 1600@ 6-9-8 1T.
Any hint of wich chips are them? I've paid like US$135 for 2x 2GB of them. Already in Brasil.
990FXA-UD3 | FX8350@4.7Ghz | Asus HD7870 | 2x 4GB Crucial Ballistix Tracer 2050Mhz 8-8-8-22 | AX850W |SSD Vertex3 Max IOPS 120GB | Auzentech Forte + TAPCO-S5
EK Supreme Full-Gold | XSPC RX240 + EX120 | MCP35x | 3x Koolance Blue Led @PWM | Tygon Black 1/2 | Bitspower Compression | @ FM CM690 I
So i have read this ENTIRE thread, all i have to say is Chew, ur a very patient person with ppl, lol, anyway ty guys good read, BUT i am still left with this question....what damn ram should i buy (answer would have been hypers im assuming, not so much anymore because of all the deaths) so what sticks should i get for 2x2gb, i want to run the best timings i can (who doesn't lol) should i go for a 1600 7-7-7-23 kit or a 7-x-7-24 kit at 1.65 or lower, or should i go for a 2000 mhz kit at 8-8-8-xx or 9-9-9-xx at 1.65 or lower, seems most tests r on I7's....
Dragon
http://smbach.com/mad.gif
Opty 175 Rig
Lian-Li PC75B case, Thermaltake BT w/ 165 CFM delta fan, Enermax 550watt PSU (36A on 12+), x1950 Pro, DFI Lanparty NForce 4 Ultra-d (moded for SLI so that i can use the second slot at 8x), Opteron 175 CCBWE 0547 TMPW (2.80, 280x10, 1.5 volts), 2x1gb Mushkin Redline xp4000 (280 3-3-2-8, 2.65 volts), 80GB WD
AM3 Rig
Lian-Li PC-75b case, Asus Crosshair III Formula, 965 x4 C3 @ 4.1 1.525 volts 2.8 NB 1.25 volts, 2x2gb Dominator GT Cas 8 2000Mhz@ 1720 6-6-5-18-22 1.725 volts, Asus 5770 VT @1010/1435, Seasonic 850watt PSU 2x12v rails 40 amps each, 36GB raptor boot drive, 80GB WD storage drive, HeatKiller LT cpu block, BI GTX 360 with 6x Scythe 3000RPM fans in push/pull, MCP 655 variable pump on setting 5, EK 150ml res, all 1/2 inch
DFI NF4 BIOS Guide
Chew is a great and paticent guy thats for sure. I would get Corsair GTS 2000 cas 8 4gig kit, about $210 they will do 1600 cas 6, there low voltage 1.65, or you cant Micron GTR, GTS they will run on 1.9 2.0 volts, good for benching, but not for 24/7, thats what i have learned from guys here and this thread.
I have a kit of OCZ 1866 cas 7 and they do 1600 cas 6 is a cake walk, but i want 1733 cas 6, im getting memory errors, so will keep testing them, and there hypers. Hope that helps you.
MSI 790FX GD-70
965 BE C3
4Gigs Corsair GTS 2000 Cas 8
Noctua U12P Push Pull
would this b the ram u speak of for the 2000mhz kit? http://www.newegg.com/Product/Produc...82E16820145266
Dragon
http://smbach.com/mad.gif
Opty 175 Rig
Lian-Li PC75B case, Thermaltake BT w/ 165 CFM delta fan, Enermax 550watt PSU (36A on 12+), x1950 Pro, DFI Lanparty NForce 4 Ultra-d (moded for SLI so that i can use the second slot at 8x), Opteron 175 CCBWE 0547 TMPW (2.80, 280x10, 1.5 volts), 2x1gb Mushkin Redline xp4000 (280 3-3-2-8, 2.65 volts), 80GB WD
AM3 Rig
Lian-Li PC-75b case, Asus Crosshair III Formula, 965 x4 C3 @ 4.1 1.525 volts 2.8 NB 1.25 volts, 2x2gb Dominator GT Cas 8 2000Mhz@ 1720 6-6-5-18-22 1.725 volts, Asus 5770 VT @1010/1435, Seasonic 850watt PSU 2x12v rails 40 amps each, 36GB raptor boot drive, 80GB WD storage drive, HeatKiller LT cpu block, BI GTX 360 with 6x Scythe 3000RPM fans in push/pull, MCP 655 variable pump on setting 5, EK 150ml res, all 1/2 inch
DFI NF4 BIOS Guide
Thats it, if you can order off [url]www.microcenter.com website is only $209, but thats the memory. Well i just got 1700 cas 6 to pass memtest so im pretty happy
MSI 790FX GD-70
965 BE C3
4Gigs Corsair GTS 2000 Cas 8
Noctua U12P Push Pull
So i take it these 2000mhz dominator kits use the same IC's as the 1600mhz version just binned a lot better? would something of the same speed by kingston or other b the same as they r a lot cheaper, jw
Dragon
http://smbach.com/mad.gif
Opty 175 Rig
Lian-Li PC75B case, Thermaltake BT w/ 165 CFM delta fan, Enermax 550watt PSU (36A on 12+), x1950 Pro, DFI Lanparty NForce 4 Ultra-d (moded for SLI so that i can use the second slot at 8x), Opteron 175 CCBWE 0547 TMPW (2.80, 280x10, 1.5 volts), 2x1gb Mushkin Redline xp4000 (280 3-3-2-8, 2.65 volts), 80GB WD
AM3 Rig
Lian-Li PC-75b case, Asus Crosshair III Formula, 965 x4 C3 @ 4.1 1.525 volts 2.8 NB 1.25 volts, 2x2gb Dominator GT Cas 8 2000Mhz@ 1720 6-6-5-18-22 1.725 volts, Asus 5770 VT @1010/1435, Seasonic 850watt PSU 2x12v rails 40 amps each, 36GB raptor boot drive, 80GB WD storage drive, HeatKiller LT cpu block, BI GTX 360 with 6x Scythe 3000RPM fans in push/pull, MCP 655 variable pump on setting 5, EK 150ml res, all 1/2 inch
DFI NF4 BIOS Guide
Well i just ordered the 2000mhz Cas 8 Dominator kit from microcenter.com.....gonna b a little over budget now on my build, but meh they better perform
Dragon
BUT i get a shiny fan!!! (and hopefully not a bunch of RMA's from them being hypers) So i am asking them now to play nice!! u hear that ram? no deaths for u!!
Last edited by FireDragon; 12-10-2009 at 11:08 PM.
http://smbach.com/mad.gif
Opty 175 Rig
Lian-Li PC75B case, Thermaltake BT w/ 165 CFM delta fan, Enermax 550watt PSU (36A on 12+), x1950 Pro, DFI Lanparty NForce 4 Ultra-d (moded for SLI so that i can use the second slot at 8x), Opteron 175 CCBWE 0547 TMPW (2.80, 280x10, 1.5 volts), 2x1gb Mushkin Redline xp4000 (280 3-3-2-8, 2.65 volts), 80GB WD
AM3 Rig
Lian-Li PC-75b case, Asus Crosshair III Formula, 965 x4 C3 @ 4.1 1.525 volts 2.8 NB 1.25 volts, 2x2gb Dominator GT Cas 8 2000Mhz@ 1720 6-6-5-18-22 1.725 volts, Asus 5770 VT @1010/1435, Seasonic 850watt PSU 2x12v rails 40 amps each, 36GB raptor boot drive, 80GB WD storage drive, HeatKiller LT cpu block, BI GTX 360 with 6x Scythe 3000RPM fans in push/pull, MCP 655 variable pump on setting 5, EK 150ml res, all 1/2 inch
DFI NF4 BIOS Guide
Is the Tmpin2 reading on AMD Overdrive closer to reality for the 955 CPU temp than the CORE cpu readings?
I hate that all cores read the same temp which I assume is completely stupid and impossible.
*CPU: Xeon X5650 @ 4.3 Ghz | Cooler: Thermaltake Water 2.0 Extreme
*Asus Rampage III Formula | RAM: 36GB DDR3 (Tracer LED + Hyper X Savage)
*Video Cards: Gigabyte Aorus 1080ti
Sound Card: Sound Blaster Z | PSU: Corsair HX1000W | Display: BenQ PD3200u | JVC RS520 projector
*Case: CoolerMaster HAF X (932 side panel) | Others: Roccat Kone AIMO | Roccat Alumic | Logitech G15 |Cameras: Sony A7R3 | RX100 V
i was also wondering how all cores read the same temp (even my duel core @100% load shows temp fluctuations between them but they always avg about the same temps in the end, core 2 does run a little bit hotter), But i don't think i have EVER seen an AOD screen on idle or on load where the cores r at diff temps even by 1 deg, anyone else but me and Shaolin95 think this odd? or r the cores just loaded that evenly? one would think one core would still b hotter then another due to heatsink mounts and tim applications varying, or does each core not have its own probe? and it just reads the temp from one core and outputs that as all 4?
Dragon
Last edited by FireDragon; 12-11-2009 at 09:27 PM.
http://smbach.com/mad.gif
Opty 175 Rig
Lian-Li PC75B case, Thermaltake BT w/ 165 CFM delta fan, Enermax 550watt PSU (36A on 12+), x1950 Pro, DFI Lanparty NForce 4 Ultra-d (moded for SLI so that i can use the second slot at 8x), Opteron 175 CCBWE 0547 TMPW (2.80, 280x10, 1.5 volts), 2x1gb Mushkin Redline xp4000 (280 3-3-2-8, 2.65 volts), 80GB WD
AM3 Rig
Lian-Li PC-75b case, Asus Crosshair III Formula, 965 x4 C3 @ 4.1 1.525 volts 2.8 NB 1.25 volts, 2x2gb Dominator GT Cas 8 2000Mhz@ 1720 6-6-5-18-22 1.725 volts, Asus 5770 VT @1010/1435, Seasonic 850watt PSU 2x12v rails 40 amps each, 36GB raptor boot drive, 80GB WD storage drive, HeatKiller LT cpu block, BI GTX 360 with 6x Scythe 3000RPM fans in push/pull, MCP 655 variable pump on setting 5, EK 150ml res, all 1/2 inch
DFI NF4 BIOS Guide
In AOD all my cores are same temp all the time from what i have seen.
MSI 790FX GD-70
965 BE C3
4Gigs Corsair GTS 2000 Cas 8
Noctua U12P Push Pull
Doesn't matter of which program you use. Run Everest and you'll see the same = all cores at same temperature. That's because of one temp sensor in AMD CPUs which is placed in the middle of the cores and it read only one temperature. Programs are there just to read what the sensor "say".
Kind of lame I guess when you are trying to make sure your TIM and Heatsink setup is done right.
Oh well, guys do you know how much voltage is safe for a 955 on AIR.
Due to my air duct and my extreme Noctua NH-D14 (SanAce + Scythe + Delta) I get about 43-45C load temps...just wondering how far I can go.
*CPU: Xeon X5650 @ 4.3 Ghz | Cooler: Thermaltake Water 2.0 Extreme
*Asus Rampage III Formula | RAM: 36GB DDR3 (Tracer LED + Hyper X Savage)
*Video Cards: Gigabyte Aorus 1080ti
Sound Card: Sound Blaster Z | PSU: Corsair HX1000W | Display: BenQ PD3200u | JVC RS520 projector
*Case: CoolerMaster HAF X (932 side panel) | Others: Roccat Kone AIMO | Roccat Alumic | Logitech G15 |Cameras: Sony A7R3 | RX100 V
Finally 4017Mhz OCCT Stable at NB 2678Mhz
Windows 7 64bit of course...
Last edited by shaolin95; 12-17-2009 at 10:07 PM.
*CPU: Xeon X5650 @ 4.3 Ghz | Cooler: Thermaltake Water 2.0 Extreme
*Asus Rampage III Formula | RAM: 36GB DDR3 (Tracer LED + Hyper X Savage)
*Video Cards: Gigabyte Aorus 1080ti
Sound Card: Sound Blaster Z | PSU: Corsair HX1000W | Display: BenQ PD3200u | JVC RS520 projector
*Case: CoolerMaster HAF X (932 side panel) | Others: Roccat Kone AIMO | Roccat Alumic | Logitech G15 |Cameras: Sony A7R3 | RX100 V
nice C2 chip man !
ROG Power PCs - Intel and AMD
CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread
Thanks, just taking advantage of the winter temps and my air duct plus the Noctua NH-D14 with my 3 fan config. lol
I was able to run 64bit Cinebench at 4095 but OCCT bsod. I did not adjust any voltages from the previous 4017 run so I need to push a bit more later tonight.
Sorry for the bad pic...I was not in a very picture taking mood that day.
Last edited by shaolin95; 12-18-2009 at 05:50 AM.
*CPU: Xeon X5650 @ 4.3 Ghz | Cooler: Thermaltake Water 2.0 Extreme
*Asus Rampage III Formula | RAM: 36GB DDR3 (Tracer LED + Hyper X Savage)
*Video Cards: Gigabyte Aorus 1080ti
Sound Card: Sound Blaster Z | PSU: Corsair HX1000W | Display: BenQ PD3200u | JVC RS520 projector
*Case: CoolerMaster HAF X (932 side panel) | Others: Roccat Kone AIMO | Roccat Alumic | Logitech G15 |Cameras: Sony A7R3 | RX100 V
Looks like 2 of my DIMM slots died. 2 & 4. I tested all the slots with 3 different kits. I can run one or two dimms in 1&3 but nothing in 2 or 4. Anyone run into this issue? PSU? Board RMA time?
Posting Permissions
Reply With Quote
Bookmarks