**Gigabyte GA-X58A-UD7 OC-Tips-Bios-Discussion Thread**

[Sniper]

Just some quick tests. 230 is max for 100% stability at 19mp, 226-7 at 20mp. Can bench up to atleast 236 with 21mp.

I'm sure someone else will do better, but thought I post this since someone asked.





Advanced CPU Features:
CPU Clock Ratio ................................ [19 ]
Intel(R) Turbo Boost Tech ...................... [Disable]
CPU Cores Enabled .............................. [All]
CPU Multi Threading .............................[Enable]
CPU Enhanced Halt (C1E) ........................ [Disable]
C3/C6/C7 State Support ......................... [Disable]
CPU Thermal Monitor ............................ [Disable]
CPU EIST Function .............................. [Disable]
Virtualization Technology ...................... [Disable]
Bi-Directional PROCHOT ......................... [Enable]

Uncore & QPI Features:
QPI Link Speed ..............................[8.28]
Uncore Frequency ............................[3680]
Isonchronous Frequency ......................[Enable]

Standard Clock Control:
Base Clock (BCLK) Control .......................... [Enable]
BCLK Frequency (MHz) ................................[230]
PCI Express Frequency (MHz) ........................ [104]
C.I.A.2........................................... .. [-]

Advanced Clock Control:
CPU Clock Drive ..............................[800]
PCI Express Clock Drive ................... [900]
CPU Clock Skew ............................. [0]
IOH Clock Skew ............................. [0]

Advanced DRAM Features:
Performance Enhance ...................... [Turbo]
Extreme Memory Profile (X.M.P) ........... [Disable]
System Memory Multiplier (SPD) ........... [ 8]
DRAM Timing Selectable (SPD) ............. [Quick]

Channel A + B + C

Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ......................[7]
tRCD ..................................[8]
tRP ...................................[7]
tRAS ..................................[20]
CR.....................................[1]
B2B.....................................[-]


Advanced Voltage Control:
CPU Intel Core i7 920 D0 Stepping
Load Line Calibration ................. [Level2]
CPU Vcore ..............................[1.2625]
QPI/VTT Voltage 1.150v .................[1.34]
CPU PLL 1.800v .........................[1.40]
PCIE 1.500v ...........................[1.50]
QPI PLL 1.100v ........................[1.10]
IOH Core 1.100v .......................[1.18]
ICH I/O 1.500v ........................[1.50]
ICH Core 1.1v .........................[1.10]

DRAM
DRAM Voltage 1.500v .............. [1.64]
DRAM Termination 0.750v.......... [AUTO]
Ch-A Data VRef. 0.750v ...........[AUTO]
Ch-B Data VRef. 0.750v ...........[AUTO]
Ch-C Data VRef. 0.750v ...........[AUTO]
Ch-A Address VRef. 0.750v ........[AUTO]
Ch-B Address VRef. 0.750v ........[AUTO]
Ch-C Address VRef. 0.750v ........[AUTO]