Quote Originally Posted by Locke View Post
damn @ 4.2 and 4.3 what setting are you guys using. I lost prime 95 after about 5.5 hours of blend testing. here are my settings and marks. Ill be away from work so it might take a couple days to run a small ftt test.

i5: 4.2 ghz (200 x 21)
vcore: 1.363 (seems better higher, was running at 1.35 and it seemed fine for gaming but didn't get a chance to but much testing in)
vtt: 1.23 (also tried 1.21 and 1.19 doesnt seem to change much)
vdimm: 1.6 (also been at 1.5 cant seem to notice much of a difference)
HD5850: 1000 (was running 1020) w/1275 ram
OS: Windows 7 64

3d06mark: about 25200 (which seems low? based on what I'm seeing here. Maybe new drivers would help.)
furmark: 2600

During gaming occasionally ill get vertical green/purple repeating (about 1/4" wide) lines and the system locks up. After the listed settings above I'm at a loss other than playing with ram timings. Any Ideas?
Hi there.

I think ( based on overclocks that are posted here ) that not all chips are really god or god at all, is a lucky thing to get a good chip. A good friend here in Chile have the same batch with the same MB but he doesn't reach same overclock and voltages.

Try withouth Turbo mode and more BCLK with lower vcore, and memory divisor with 2:8, memory can reach 1800mhz if you have good chip. Set memory voltage to 1.67 some MB have vdroop to 1.65 and lower than that sometimes. Relax latency to 9-9-9-24 2T and try it again.

Sorry for my english i need to practice and read more